Liczymy pasujące modele…
IO Shield blank for mATX/ATX. Printed in Jessie Black PLA on Prusa Mini+ Added modifier box to interior for grid infill 25% and zero top and bottom solid layers. After aligning the motherboard ports with the shield cut out corresponding…
Wydruk około 0,25 €–0,31 € nettoWstępna wycena jednego wariantu
Introduction This is a simple PC mainboard frame/tray system intended for open-air or custom enclosure PC builds. The intent is to support a broad variety of mainboards from iTX to so-called EATX with modules that fasten together with M4…
Deutsch: Vorwort: Das Gehäuse wurde noch nicht gedruckt, es ist noch Work in Progress. Sobald das Gehäuse gedruckt wurde, werden die Files entweder geupdatet oder idealerweise so belassen. Das Gehäuse ist ein kompakter Midi-Tower mit…
This is a remix of the side panels from the Modcase Evolution case. Very nice baseline design, I highly recommend it! I wanted my side panels to have a bit more flare to them, so I made them into multi part pieces! The mesh can be printed…
Forma I Alternative link (Free): https://makerworld.com/en/models/3132314-forma-i-matx-pc-case Default Dimensions: Length 345.7mm, width 161mm, 278mm (w/ 15mm feet) Supports Mini-ITX and mATX motherboards, 325mm GPU, 135mm CPU cooler and…
Remix of Simple mATX form PC chassis for the use with external AC/DC power adapter. This can accommodate bigger board.
KIND REMINDER: If you plan to build in this case, please make sure to read the full description as it may contain important details affecting your specific building plans. Unique looking Micro-ATX case designed specifically to be both…
on photo mATX (ASRock B650M Pro RS WiFi) and ATX (ASUS Maximus V Formula) variants
It has been tested on a KWS 10" rack and fits perfectly. This point is important: to minimize bending and long-term creep, the plate is supported both on the front panel and against the inside of the back panel. I designed this because…
Quick CAD. Does the job good enough for me. Could probably be optimized but is hidden by the motherboard. Print 6 standoffs and 1 base. I printed it all in PETG for the heat resistance. Mount the motherboard using M3 screws from the back.…
This bracket and button cover allow you to use a standard 12x12x7.3mm tactile switch (see photo) as a power button in LxW's Open Air mATX case . The bracket fits the original mounting holes in the case's Front IO plate and should be…
A clean, parametric cable cover designed for the Lian Li x DAN A3-mATX case. It hides the PSU cable bundle visible through the tempered glass side panel, matching the white aesthetic of builds like the DeepCool PN850M. This cover is…
ASUS B85M-G R2.0 mATX 1U Rack Mount Tray — 10" Server Rack A custom open-frame 1U rack mount tray designed specifically for the ASUS B85M-G R2.0 micro-ATX motherboard, built to fit a 10" server rack (260×200mm interior). Prints as a…
These files bring the Portal PC case to reality! It merges the designs seen in Portal and Portal with RTX. See the latest updates on this project here: https://www.cemetech.net/forum/viewtopic.php?p=315622 Prerequisites: These parts are…
Check out the full build video here: To print this case a print volume of 300x300mm or bigger is required. ** PLEASE READ: I mention in the video that you can use regular M3 screws to mount the 3.5" hard drives, this turned out to be…
Had some older unused mATX small size main boards, fully equipped. Before recycling, I saw a need of small linux based server. The original Midi Tower chassis with 400W power supply was quite some big piece of furniture for this…
Die ist ein PC case für Matx motherboard und maximal 2slot pcie grafikkarten Sehr minimalistisches aussehen. Benötigte Teile ⌀ 6 x 90mm Stange (material egal) → für befestigung von der Rückplatte Kunststoff Leim Nutzbares Material: PLA,…
little remix that extends the original somewhat. (M : Medium) made it 2.35cm deeper to fit matx asrock motherboard
DIY mATX PC Mount with hook for Skadis. petg, 5walls, 50%infill. Motherboard pendant (mATX motherboard supported) Fan Bracket (360 Water Cooling Fan) Vertical mounting bracket for graphics card (need to equip your own graphics card…
Introduction I recently picked up the Lian Li A3 case for a Computer I was building. Unfortunately, the wooden front panel offered by Lian Li wasn’t available here in Germany. As a maker, I couldn’t just leave it at that. So, I designed…
https://youtube.com/live/ycVKY4jn1pk?feature=share - Live stream showing the processing and assembly of the case without the panels. https://youtube.com/live/vIafnoBmKZY?feature=share - Live stream showing some panel installation options.…
bolts to existing ATX mounting points and indicates positions for the 2 extra mATX bolts
For detailed build, background, and item details: https://www.printables.com/model/1152896-sug-freebeam-matx High Level: 18.2L ( 346mm length x 276mm height 190mm width) mATX (ITX obviously too) ATX PSU (160mm max length) Full Size GPU…
A Compact, 3D-Printed mATX Open Air case for Builders & Tinkerers This open-air test bench case is designed for builders who need easy access to their components while keeping a compact yet functional layout. Whether you're testing…
Available on OnShape too https://cad.onshape.com/documents/fe777d1575cef891ca305e72/w/b5b392b5b9760dca0e4465e3/e/494da129e960faa7d66c887b?renderMode=0&uiState=67a107d3303468093a6b9919
OnShape link https://cad.onshape.com/documents/fe777d1575cef891ca305e72/w/b5b392b5b9760dca0e4465e3/e/3b2138d3dad221bb9173e2bf?renderMode=0&uiState=67a10b58303468093a6ba79a Needs 1x M4 heatset insert, 1x M4 bolt, 3x M3 bolts to mount into…
I wanted an affordable DIY NAS case that fits 8 HDDs, no external GPUs or huge power supplies.I built this to fit an mATX board , as they're cheaper than microATX and give more space. I managed to fit a SAS LSI card. A low profile CPU…
i have linux mint on this computer for seting up klipper to my 3d printer so it had to be compact. I didn't have rasppberry pi in my hands so i went with another alternative. to assemble this case you need to join two pieces. You can…
This is a very small mATX pc case that requires only wood screws and NO heat inserts. I wanted a small case for my old pc, without changing any pc parts. It has mATX motherboard, an ATX psu, a 260mm RX 580 videocard and two 2.5mm SSDs. It…
This is a custom model i made for a lightweight compact mAtx testbench. This model came from a desire for an easy and cheap to print testbench. I printed at 0.2 mm layer heights with 20% infill. Supports only needed for the platform and…
Mini pc with modern CPU are still very expensive, and they also have the disadvantages of using soldered CPU or sodimm ram. I choose this board for the cheap price while still being compact, even if it's not an itx board…
LxW Basic Plus – A Feature-Packed mATX Case This project was designed to bring powerful mATX builds into a compact, well-optimized case—without sacrificing compatibility. It supports mid-range to high-end components, including full-size…
This is the top front panel clip receiver that mounts in the case and helps hold the front panel on. Im guessing its used in other cases, etc. I printed on a X1 Carbon with PLA using the .20 mm Standard profile and it seems to work pretty…
Expect to update with more pictures shortly. Originally wanted to fit this fully on a 256x256 print bed, all but one part fits, split one part that didn't in two for those that need it. Designed case as none was available for 4 PCI-E slot…
This is mount for matx motherboard. [update] v1.1 update with precise hole spacing and cover in the front.
Introduction / Description This adapter lets you mount the Alphacool Core 120mm reservoir/pump combo vertically on the PSU bracket of the Lian Li A3 case. It was born out of a personal modding challenge: I originally planned a custom AMD…
This is a remix of the underside cover from the Modcase Evolution case. Very nice baseline design, I highly recommend it! Due to some size limitations, my PSU sticks out of the bottom of the case. Therefore, the power cable has to be run…
Forma I Alternative link (Free): https://makerworld.com/en/models/3132314-forma-i-matx-pc-case Default Dimensions: Length 345.7mm, width 161mm, 278mm (w/ 15mm feet) Supports Mini-ITX and mATX motherboards, 325mm GPU, 135mm CPU cooler and…
Power supply was choking a bit due to the orientation. In my configuration the PSU fan is pointed toward the inside of the case, which isnt optimal. To give it a bit more air I added two 60mm noctua fans. One of which has a baffle to…
Remix of Simple mATX form PC chassis for the use with external AC/DC power adapter. This can accommodate bigger board.
Download on makerworld for bambu studio print profile Magnetic GPU support bracket for MATX cases Put a 8x2mm round magnet and the cover (rod) in the slot Reupload from makerworld (…
This is a cool-looking, 3d printable pc case designed to stand out. The sharp corners and plexiglass really give it a modern eye-catching appearance. One great about the design is it only needs a 180mm x 180mm bed to be printed. Pc case…
Trying to make a super simple test bench for SFX and ATX power supplies that can be printed on smallish printers. Motherboard holes are aimed for 3.05mm which should allow for #6-32 standoffs to self-tap, no heat-insert necessary. You can…
Update 24/07/25: Version 2 of the 120AIO for OneSlot & TwoSlot Beds, made stronger but with a more traditional fixing. Added a 240AIO version that could also hold a 360AIO and is as thick as a typical fan (25mm) for strength, so you will…
sincerely, go buy a case it's more convenient and saves spaghetti requires: M3 5mm x 4mm insert M3 screws support an 80mm fan in the back up to 7 hdd "support" 2 120mm fan in the middle (hot-glued slim dissipator needed ATX PSU i don't…
This is a sleek, Fish Tank-style 3D printable PC case designed to show off your build like a display piece. The sharp edges and plexiglass side panels give it a clean, futuristic vibe while keeping all the hardware visible. Despite the…
This model has been optimized for the BambuLab X1C using Bambu Studio. For the original print files, please check my MakerWorld post . Credit to PandaN on MakerWorld for the technique used to apply wood grain. Check out their process here…
A simple cut to a leg to fit a PSU that has one those fan shrouds on top.
Dimensions: 248x332x278mm (22.9 L) Features: - Supports 2.5" and 3.5" drives - Allows for GPUs of up to 280 mm in length - Fits 2 92mm intake fans Print with PETG (I used SUNLU) and combine the segments with super glue. For assembly, you…
Remixed to add the missing standoff holes for mATX and ITX form factor motherboards. The cable tray in the back has also been modified for extra clearance for the new standoff. Filling in this gap gives much better versatility to future…
What's better than a big Voron? A small one! Remixed from the original Voron V.PC - 3D Printed Case to fit the mATX form factor. This build should fit the following: mATX & ITX Motherboard 199mm tall Air Cooler Tower 345mm long GPU…
Test base for ATX/mATX/ITX motherboards (20mm height). Test base for motherboards in the following formats: ATX, mATX, and ITX. The motherboard height above the table/worktop is 20mm. Designed to allow the motherboard to be…
A case I designed to be fully 3d printable. Fitting a RTX4060 ti super from Asus. Print at your own risk, there is not much space for a CPU cooler. I recommend to not print it from PLA as it can warp especially with heat from high powered…
I have designed this and ran it as a server for a year. Print at your own risk , there is not much flexible space for a variety of different GPU. It was printed in PLA but for high powered components i do not recommend it. I highly…
GenCase - Modular Open Air PC Case Short Description GenCase is a fully modular open air PC case designed for maximum flexibility and clean cable management. Unique feature: convertible orientation to route all cables at the case base for…
KIND REMINDER: If you plan to build in this case, please make sure to read the full description as it may contain important details affecting your specific building plans. Unique looking Micro-ATX case designed specifically to be both…
on photo mATX (ASRock B650M Pro RS WiFi) and ATX (ASUS Maximus V Formula) variants
These should work with most vintage Emachines towers of the DDR memory era. The ones with the black or grey case and rounded silver front. Honestly you could also use them with any other computer case as well though. You might want to…
It has been tested on a KWS 10" rack and fits perfectly. This point is important: to minimize bending and long-term creep, the plate is supported both on the front panel and against the inside of the back panel. I designed this because…
Quick CAD. Does the job good enough for me. Could probably be optimized but is hidden by the motherboard. Print 6 standoffs and 1 base. I printed it all in PETG for the heat resistance. Mount the motherboard using M3 screws from the back.…
This bracket and button cover allow you to use a standard 12x12x7.3mm tactile switch (see photo) as a power button in LxW's Open Air mATX case . The bracket fits the original mounting holes in the case's Front IO plate and should be…
GPU bracket for https://www.printables.com/model/35720-modular-itxdtxmatxatxssi-eebssi-cebeatxxl-atx-main , for mATX, Asrock B550M Pro4 specifically, you WILL need to tweak to make it work with your MB and GPU. Source provided in form of:…
I created a computer case to fit into a desk I made, and it looked fairly nice, so I thought I would share it. The body is made of PLA, the diffuser from PETG, and the motherboard back plate is ABS. I personally don't trust PETG to be the…
WILL PROBABLY NOT WORK ON OTHER RACKS OTHER THAN THE RACKMATE T2 UNLESS YOUR SPACING BETWEEN BACK AND FRONT IS 10 1/4 INCHES OR 260.35MM PCIE CARDS WILL NOT FIT WITH BRACKET INSTALLED V1: Release V2: Changed back cutout to not block…
A clean, parametric cable cover designed for the Lian Li x DAN A3-mATX case. It hides the PSU cable bundle visible through the tempered glass side panel, matching the white aesthetic of builds like the DeepCool PN850M. This cover is…
ASUS B85M-G R2.0 mATX 1U Rack Mount Tray — 10" Server Rack A custom open-frame 1U rack mount tray designed specifically for the ASUS B85M-G R2.0 micro-ATX motherboard, built to fit a 10" server rack (260×200mm interior). Prints as a…
Made a little stand for a keycap power button i got off amazon, just super simple little stand that i used a longer screw to keep on the side when building the case
These files bring the Portal PC case to reality! It merges the designs seen in Portal and Portal with RTX. See the latest updates on this project here: https://www.cemetech.net/forum/viewtopic.php?p=315622 Prerequisites: These parts are…
This is a bit of a niche design for using a riser cable to move the LSI 9220 8i HBA to another location in the chassis. This requires your own riser cable (approx 30cm long) and some brass inserts. This is designed to work in the…
The original mount holes for the PSU bracket are covered by the mATX motherboard. This bracket allows you to still install the PSU to the side of the case with a duct for getting cleaner airflow from the side vent (otherwise it tends to…
Designed this as I have a bunch of cheap old mATX boards/cpus with stock coolers that I need to test quickly without having to faff about screwing each one down, and this is what I came up with to hold them. Only tested on older budget…
About the Project Compact Open Frame PC Case is a minimalist and functional 3D printed test bench and daily case. It is designed to stack components vertically to save desk space, using an ATX power supply as the base and suspending the…
Mini ITX to MATX adapter for Corsair 2000D airflow.
Optimised for 0.4mm nozzle. The internal structure must be in ABS with at least 20% infill and the outer part in PLA. You must need to split the outer part because of the height so theres is a ring to connect the parts. The io shield, in…
designed for slat-wall at work to allow for interchangeable cloning machines. should be compatible with most slat-wall designs. a few parts you will need to buy/have. -motherboard standoffs (i used m3) -screws -and heat inserts -drill…
There are almost no atx bench top designs currently on thingiverse since most 3D printers are dimensionally too small to print parts for the ATX standard. This bench top design is capable of being printed on most smaller printers like the…
Theses models allows it to replace the original Thecus motherboard agains an standard mATX motherboard and a silent PSU.
Print both halves and four feet then screw in some motherboard standoffs and glue the pieces together. Fits a standard mATX motherboard or Mini-ITX motherboard. I printed with no top and bottom layers and a hexagonal infill, this make the…
PC benchtables, also known as PC test benches, provide a convenient and efficient workspace for building, testing and troubleshooting computer systems, making it easier for users to build and test their systems, and to diagnose and…
IMPORTANT: Keep in mind that this project is now several years old, and will have more inaccuracies than my more recent designs. No more updates will be done to this design. Watch the full build video here: https://youtu.be/yp67qvfYZVM…
This is a motherboard tray to fit a microATX motherboard. The optional card support bracket screws into the side with two to five M3x12 screws depending on how secure you want the bracket. The motherboard is mounted down with four M3x6 or…
Check out the full build video here: To print this case a print volume of 300x300mm or bigger is required. ** PLEASE READ: I mention in the video that you can use regular M3 screws to mount the 3.5" hard drives, this turned out to be…
Had some older unused mATX small size main boards, fully equipped. Before recycling, I saw a need of small linux based server. The original Midi Tower chassis with 400W power supply was quite some big piece of furniture for this…
I could not find a case to print that would allow me to use all my current PC hardware, so I made one…. This should work with any video card up to 280mm long. This is a 300mm cubed case that was printed on my Voron 350 running at about…
I could not find a case to print that would allow me to use all my current PC hardware, so I made one…. This should work with any video card up to 280mm long. This is a 300mm cubed case that was printed on my Voron 350 running at about…
This case was designed to lock together well while requiring minimal filament and able to be printed on most printers. I printed this on my ender 3 (Stretched to the limit in someplaces) and is setup to acomodate a Dual slot gpu, though…
The Precision Screwdriver Case by TimATX printed and fit together well, but my screwdrivers did not fit well. I printed it because my original case was cracked and would not stay closed. I redesigned the inserts, basing them on my set's…
I could not find a case to print that would allow me to use all my current PC hardware, so I made one…. This should work with any video card up to 280mm long. This is a 300mm cubed case that was printed on my Voron 350 running at about…
Die ist ein PC case für Matx motherboard und maximal 2slot pcie grafikkarten Sehr minimalistisches aussehen. Benötigte Teile ⌀ 6 x 90mm Stange (material egal) → für befestigung von der Rückplatte Kunststoff Leim Nutzbares Material: PLA,…
DIY PC Board Mount with hook for Skadis. petg, 5walls, 50%infill.
Remix of my Veriton case that allows for a Standard ATX PSU to be used. Makes use of the same cut down motherboard tray, but the base has been redesigned in separate parts (mainly for strength). Uses this remixed motherboard tray:…
This is just new inserts for my cube case. Please download the files and instructions from this model: https://www.printables.com/model/796807-dragon-cube-matx-pc-case-with-atx-power-supply Using a .2 layer height you will need to have…
little remix that extends the original somewhat. (M : Medium) made it 2.35cm deeper to fit matx asrock motherboard
I decided to repurpose an old Gen 3 i3 PC that I had gathering dust as some kind of home server, the old case was too big and bulky so I wanted to make my own compact option couldn't find one that I liked, so here we are. I have included…
This is my take on an open frame micro ATX PC case. Inspired by “ATX Open PC Frame” by Heblyz, I created this model from scratch specifically with the following features in mind: Fits mATX motherboards Fits larger ThermalTake 800W+ power…
![Modular ITX/DTX/mATX/ATX/SSI-EEB/SSI-CEB/EATX/XL-ATX mainboard frame/tray [Updated 2026-07-19]](https://media.printables.com/media/prints/35720/images/1199286_159f781c-d9e2-4896-be13-5668e22d36a3/eatxv3.jpg)
