1 / 12
mATX PC CASE with ATX PSU, 260mm GPU and NO heat inserts — zdjęcie 1
1 / 12

mATX PC CASE with ATX PSU, 260mm GPU and NO heat inserts

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Very small mATX pc case with ATX PSU, 260mm GPU and NO heat inserts.

Ocena
5 / 5
Polubienia
89
Pobrania
443
Wydruki
0
Wyświetlenia
6934
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Public Domain

This is a very small mATX pc case that requires only wood screws and NO heat inserts. I wanted a small case for my old pc, without changing any pc parts. 
It has mATX motherboard, an ATX psu, a 260mm RX 580 videocard and two 2.5mm SSDs.
It has a support for the videocard and one for the psu so they will not fall.
I added the blender file in case you want to change anything.
The initial desing is made in FreeCAD, so I can provide those files aswell if you want them.

I printed it on a Creality Ender 3 V3 and I had to split the parts so they can fit the print bed.
I used CA glue to bind them together, and it holds very good.
The biggest piece is 351x286mm so if you have a printer big enough you can print them without splitting.

Slicer settings I used:
-wall loops 5
-no top/bottom layer
-infill density 13%
-infill pattern: honeycomb 
For the holes I added cylinder modifiers with 7mm diameter and used 100% infill.

I assembled it using wood screws, 3.5mm diameter and 16mm long.
For the motherboard I used 12mm long screws.
SSD holders are glued with CA glue(aka super glue) into the front panel. Then SSDs are screwed into the holders.
These are the holders that I used.
https://www.printables.com/model/249362-25-ssd-case

KEEP IN MIND that this is not perfect, it has some small issues, but feel free to modify it as you like.
Some small issues are: 
- backpanel needs a bit of cutout dependind on the PSU, I did that with a cutting pliers.(see photo)
- my power button is an improvisation because I had an old button with a weird shape, so I did a small cutout with the pliers and then used CA glue(aka super glue)to fix it.(see photo)
- GPU support is not the best, but it works, feel free to adjust it.(see photo)

The FUN part with splitting the parts is that if you want to do a modification, you can print only half of the part and reuse the other one. (Use a cutter to split them, otherwise CA glue will make it crack)

Later edit: - added some legs, glued them with CA glue(aka super glue). I attached the stl file.

Feel free to ask anything in the comments section. I will be happy to answer any question.
If you need any help modifying it, you can leave a comment. I'm not a master at 3D modeling but I can help.

Tagi