1 / 12
mATX PC CASE with ATX PSU, 260mm GPU and NO heat inserts — image 1
1 / 12

mATX PC CASE with ATX PSU, 260mm GPU and NO heat inserts

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Very small mATX pc case with ATX PSU, 260mm GPU and NO heat inserts.

Rating
5 / 5
Likes
89
Downloads
446
Makes
0
Views
6,967
Reviews
1

Updated at source:

Model information

Category
Computers
License
Creative Commons — Public Domain

This is a very small mATX pc case that requires only wood screws and NO heat inserts. I wanted a small case for my old pc, without changing any pc parts. 
It has mATX motherboard, an ATX psu, a 260mm RX 580 videocard and two 2.5mm SSDs.
It has a support for the videocard and one for the psu so they will not fall.
I added the blender file in case you want to change anything.
The initial desing is made in FreeCAD, so I can provide those files aswell if you want them.

I printed it on a Creality Ender 3 V3 and I had to split the parts so they can fit the print bed.
I used CA glue to bind them together, and it holds very good.
The biggest piece is 351x286mm so if you have a printer big enough you can print them without splitting.

Slicer settings I used:
-wall loops 5
-no top/bottom layer
-infill density 13%
-infill pattern: honeycomb 
For the holes I added cylinder modifiers with 7mm diameter and used 100% infill.

I assembled it using wood screws, 3.5mm diameter and 16mm long.
For the motherboard I used 12mm long screws.
SSD holders are glued with CA glue(aka super glue) into the front panel. Then SSDs are screwed into the holders.
These are the holders that I used.
https://www.printables.com/model/249362-25-ssd-case

KEEP IN MIND that this is not perfect, it has some small issues, but feel free to modify it as you like.
Some small issues are: 
- backpanel needs a bit of cutout dependind on the PSU, I did that with a cutting pliers.(see photo)
- my power button is an improvisation because I had an old button with a weird shape, so I did a small cutout with the pliers and then used CA glue(aka super glue)to fix it.(see photo)
- GPU support is not the best, but it works, feel free to adjust it.(see photo)

The FUN part with splitting the parts is that if you want to do a modification, you can print only half of the part and reuse the other one. (Use a cutter to split them, otherwise CA glue will make it crack)

Later edit: - added some legs, glued them with CA glue(aka super glue). I attached the stl file.

Feel free to ask anything in the comments section. I will be happy to answer any question.
If you need any help modifying it, you can leave a comment. I'm not a master at 3D modeling but I can help.

Tags