Counting matching models…
IO Shield blank for mATX/ATX. Printed in Jessie Black PLA on Prusa Mini+ Added modifier box to interior for grid infill 25% and zero top and bottom solid layers. After aligning the motherboard ports with the shield cut out corresponding…
Print approx. €0.25–€0.31 excl. taxPreliminary estimate for one variant
Introduction This is a simple PC mainboard frame/tray system intended for open-air or custom enclosure PC builds. The intent is to support a broad variety of mainboards from iTX to so-called EATX with modules that fasten together with M4…
If you need an IO shield you can simply adapt it to your mainboard. I have mine printed in PETG. I Have used Slicer modifier to create a mesh but you can also use the FreeCAD file to position your cutouts for connectors.
A minimal open-frame case for Micro-ATX motherboards. Designed to serve as the base for hardware testing rigs as seen here: It should be compatible with any Micro-ATX motherboard and SFX PSU. The ones in the photo are: Gigabyte B760M DS3H…
If you need an IO-Shield for your ATX/ITX mainboard, you can use this as a base template. Print it out once, screw down the mainboard and then measure / shoot a photo. Then you can align the sketch in fusion 360 to fit your mainboard.…
Deutsch: Vorwort: Das Gehäuse wurde noch nicht gedruckt, es ist noch Work in Progress. Sobald das Gehäuse gedruckt wurde, werden die Files entweder geupdatet oder idealerweise so belassen. Das Gehäuse ist ein kompakter Midi-Tower mit…
This is a 3D printable cover plate for the ATX power supply opening, designed to mount a standard IEC C14 power connector. Ideal for PSU relocation or internal power supply mods. While it’s compatible with most PC cases following the ATX…
Custom built variable voltage ATX power supply. Variable 0-50v and dedicated 5v and 3.3v outputs. USB charger. Case is held together with M3 10mm socket head screws and heat inserts. I used 3mm and 5mm inserts. Fan required a longer M3…
It will fit other Server PSUs but not all follow the same dimensions!!! Originally made for a DELTA Intel DPS-750XB A (specs found here page 40). Make sure your psu has following dimensions: 39mm x 73.5mm x 185mm Brackets might seem loose…
IO-Shield for the ITX Mainboard: MSI J1900i-S01 Fits nicely on every ATX, MicroATX and ITX Cases. Printing is super simple. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.2 Infill: 20%…
Compatible ioplate for MSI H410M PRO-E
Various backplates for ATLANTIS for MiSTer within Thin Mini-ITX or cases with standard ATX size IO zones. The tabs are connected with 6mm M3 bolts and nuts - rotate to fasten. See the user guide on our web page for further information.
Compatible ioplate for motherboard Huananzhi x79 Deluxe
printed parts to easily convert an ATX power supply from an old pc into a bench power supply. there is a cap to cover the holes from which the DC cables previously came out with a diameter for the hole of about 2 centimeters and a…
Compatible ioplate for china motherboard Huananzhi x79 Deluxe
This is a remix of the side panels from the Modcase Evolution case. Very nice baseline design, I highly recommend it! I wanted my side panels to have a bit more flare to them, so I made them into multi part pieces! The mesh can be printed…
~---:::(WORK IN PROGRESS):::---~ Update 5 5/17/2026 Added minimal 140mm fan mount with airflow director + expansion card support v2. Update 4 5/3/2026 | Added Keyboard holster comprising of two parts, top and base. Located in the Extras…
Overview This is a simple chassis to mount a Framework Laptop 12 mainboard inside a standard ATX pc case or open frame chassis. The idea being it can exist within a larger PC and act as a streaming/encoding machine. A smaller workhorse…
A minimal open-frame case for Micro-ATX motherboards. Designed to serve as the base for hardware testing rigs as seen here: It should be compatible with any Micro-ATX motherboard and SFX PSU. The ones in the photo are: Gigabyte B760M DS3H…
This custom 3D-printed case is designed to turn a Dell N350P-00 ATX power supply into a compact, multi-output DC bench power cube. The idea was to make a clean and organized way to repurpose an old PSU into a power supply for project…
I created this for work because we were tasked with building hundreds of computers for a project and I wanted a quick way to know where to place the standoffs in the multiple form factor compatible cases for micro ATX motherboards
This bracket allows you to use the power supply out of a Dell OptiPlex SFF computer in a case which takes a standard ATX one. Despite its strange dimensions, its outputs conform to the ATX standard. You'll need 7 screws; 4 to mount the…
Now available with front air intake as well! The file called FRONT_AIR_INTAKE_VERSION_drive_bay_1_2_3_4 can be printed instead of the original drivebay. (See pictures for example) This project is designed specifically to be compatible…
Forma I Alternative link (Free): https://makerworld.com/en/models/3132314-forma-i-matx-pc-case Default Dimensions: Length 345.7mm, width 161mm, 278mm (w/ 15mm feet) Supports Mini-ITX and mATX motherboards, 325mm GPU, 135mm CPU cooler and…
Remix of Simple mATX form PC chassis for the use with external AC/DC power adapter. This can accommodate bigger board.
This bracket allows you to use the power supply out of a Fujitsu Esprimo E400 computer in a case which takes a standard ATX one. Despite its strange dimensions, its outputs conform to the ATX standard. You'll need 7 screws; 4 to mount the…
This bracket allows you to use a standard (although not terribly common) TFX power supply in a case which takes a standard ATX one. You'll need 7 screws; 4 to mount the bracket and 3 to mount the PSU to the bracket. Made in PLA, printed…
Overview This model is an alternative mount for the ATX Power Control Board (GL-ATXPC) for the GL.iNet Comet KVM (GL-RM1). The official mount connects to an expansion slot cover and so must fit side-by-side with PCIe expansion cards even…
Voici une alimentation de laboratoire réalisée à partir d’une vieille alimentation ATX de PC, remise au goût du jour grâce à un boîtier imprimé en 3D et quelques ajouts pratiques. Au menu : sorties 12V, 5V bien accessibles, 2 double USB…
This is a new front panel with several choices : Connectors from 3.3V to 12V USB connector Variable power supply, up to 24V I have uploaded 2 STL files : **Remixed ATX Power Supply 1.stl* is the main one **Remixed ATX Power Supply 2.stl*…
Corvus ATX – The 3D-Printed Voron-Inspired Computer Case! What if the Voron Design team decided to stop making 3D printers and build a PC case instead? Spoiler: THEY DIDN'T! This is not an official Voron project… but it might be what it…
Frustrated with the low cranking amps of the stock battery in my 2018 Mustang GT350R I ordered an Antigravity ATX20-HD lithium phosphate battery with a much higher CCA rating and significantly reduced mass. Because the ATX20-HD is much…
Meet an ultra-compact, intelligently engineered Micro-ATX PC case designed to push the limits of small-form-factor computing. This 3D-printed case is built for creators, gamers, and PC enthusiasts who want maximum performance in the…
KIND REMINDER: If you plan to build in this case, please make sure to read the full description as it may contain important details affecting your specific building plans. Unique looking Micro-ATX case designed specifically to be both…
Updated - I had a few screw clearances that were off. I have printed and tested. It works for me, but it's a really tight fit with all the wires.
I wanted to mount an ATX PSU to my Skadis wall. This is my very first project with FreeCAD, so it may be not perfect. The hooks are printed seperatly so you can choose horizontal or vertical orientation for mounting. My print setting are:…
I can find and upload the fusion 360 design file if anybody wants it, leave a comment. It's way larger than it needs to be, but I wanted to use stuff I had laying around, so a full size ATX power supply went in instead of getting a more…
To have an ATX power supply in a 10-inch rack in 2 easy-to-print parts: 2.5" SSD, 2 LEDs, and a PC on/off switch
ATX PSU back plate - 2 PSU positions for air circulation Bottom plate adapted for 120mm fan Rubber TPU Feet + standoffs
Designed for the UENORTH UE-S6 to fill the gap when using a build with no PSU. Flex ATX size with a mildly unique hole pattern. Hole sizes are a bit too small when using PLA. I used the screws to tap the holes and this worked for me, but…
Simple computer power supply (PSU) adapter plate to change a SFX mount to be Flex-ATX compatible. Printing instructions: Material: PETG recommended Infill type: Honeycomb Density: 20% (15-25 is ok) Walls/Perimeters: 2mm or 5 layers at 0.4…
The wonderful NAS CASE 6-bay (+3 SSD) project from https://www.printables.com/@makerunit_735717 expects a SFX form factor PSU. This bracket allows you to use a Flex ATX form factor instead. I modified "external_upper_right_panel_v13.stl"…
on photo mATX (ASRock B650M Pro RS WiFi) and ATX (ASUS Maximus V Formula) variants
It has been tested on a KWS 10" rack and fits perfectly. This point is important: to minimize bending and long-term creep, the plate is supported both on the front panel and against the inside of the back panel. I designed this because…
Quick CAD. Does the job good enough for me. Could probably be optimized but is hidden by the motherboard. Print 6 standoffs and 1 base. I printed it all in PETG for the heat resistance. Mount the motherboard using M3 screws from the back.…
Using this model you can mount a FlexATX PSU + mITX board + PCIe card on one 2u rack mount. The OpenSCAD file is attached in case you want to remix this or customize it in other ways. My build (aka parts that are tested with this build):…
This bracket and button cover allow you to use a standard 12x12x7.3mm tactile switch (see photo) as a power button in LxW's Open Air mATX case . The bracket fits the original mounting holes in the case's Front IO plate and should be…
This is an eGPU base based on the ADT-Link UT3G eGPU board, allowing you to connect a desktop GPU to any device with a USB4 or Thunderbolt connection. Useful for 3D scanning with smaller laptops, video games and whatnot and makes the…
I modified an existing project. I added a fan mount on the front of the BC-250 board and also modified the case front to make everything fit. The idea was to not destroy the fins of the original BC-250 cooling. Additionally, I recommend…
EDIT: v2: better support for mounting hard drive with top facing right. Most SATA angle cables are only down, so mounting the hard drive on it's right side/clockwise will allow use of these cables. This is a remake of the official Cooler…
My old PC case lost a foot and wanted to sit crooked, so I modeled this foot to match the dimensions of the original.
A clean, parametric cable cover designed for the Lian Li x DAN A3-mATX case. It hides the PSU cable bundle visible through the tempered glass side panel, matching the white aesthetic of builds like the DeepCool PN850M. This cover is…
I improved a bit the panel with longer screw holes and made one side smaller for regular ATX power supplys. See pictures
My take on a lab bench power supply using a repurposed computer PSU. For the full build process, refer to the Instructables link in the original model’s description.
A fully parametric ATX Power supply case / cover. This allows you to make a very simple cover for your bench top power supply and holes for terminals, LEDs, and switches exactly as you need them. Note: The parametric .scad file depends on…
I created this model usiing a plank template. On the second attempt i got into the holes under the audio.
DISCLAIMER: This is a very rough, amateur remix. It is a "function over form" project with several fitment issues, but it works great for thermals. I modified the "Dual Fan version of BC-250 ATX CASE" to add about 50mm of extra width. My…
NEW VERSION HERE 2U plate to mount a full ATX power supply in a 10 inch rack cabinet. Do not print in PLA. The heat and the weight WILL eventually deform it. Requires a 10"+ build plate (254mm). A Prusa i3 or an Ender 3 is not big enough.…
This is a 1U shelf designed to mount the HDPLEX 250W GaN Passive AIO ATX Power Supply via the mounting holes on the bottom of it.
ASUS B85M-G R2.0 mATX 1U Rack Mount Tray — 10" Server Rack A custom open-frame 1U rack mount tray designed specifically for the ASUS B85M-G R2.0 micro-ATX motherboard, built to fit a 10" server rack (260×200mm interior). Prints as a…
2U shelf to mount a full ATX power supply in a 10 inch rack cabinet. It features a side space to shove the unusued cables (useful if you don't have a full modular unit). The provided .3mf file contains two models. The one named "rack" is…
This adapter allows you to use a full-sized ATX PSU in compact cases that natively support only SFX power supplies . Important Note: Before printing, please check your case layout carefully. PC cases have different PSU orientations and…
Hello together, have designed a 19-inch 2.5U rack-mount enclosure for an M-ATX motherboard and an ATX power supply. The motherboard bracket supports both M-ATX variants: the small and the large. The large M-ATX variant is primarily used…
These files bring the Portal PC case to reality! It merges the designs seen in Portal and Portal with RTX. See the latest updates on this project here: https://www.cemetech.net/forum/viewtopic.php?p=315622 Prerequisites: These parts are…
DIY ATX Bench Power Supply. For more info, please visit my github: https://github.com/chanmin723/DIY-ATX-Bench-Power-Supply Features I modified the original design to better suit my specific needs and improve reliability: Upgraded…
3D Printable Mini ITX computer case. Full build video: https://youtu.be/WKnhARips-w Features: 2-slot Graphics Cards up to 270mm (about 40mm thick) Bottom to top ventilation Mounts for ATX power supply (depth max 125mm) Mounts for 3.5" HDD…
This is a cross-breed of robertguy and flash24's bench PSUs. The body is designed to replace robertguy's one-piece unit to make wiring a little easier for those of us equipped with sausage fingers. But I've also added the independent…
Check out the full build video here: To print this case a print volume of 300x300mm or bigger is required. ** PLEASE READ: I mention in the video that you can use regular M3 screws to mount the 3.5" hard drives, this turned out to be…
Had some older unused mATX small size main boards, fully equipped. Before recycling, I saw a need of small linux based server. The original Midi Tower chassis with 400W power supply was quite some big piece of furniture for this…
"A mount to allow an ATX PSU to be used in the NR200P case. This holds the power supply at the front of the case in front of the graphics card with space to allow the front panel IO cables through. It's based on the one you can download…
Printable on BambuLab 256x256x256 bed (biggest part - base is actually 231.52 x 251.08 x 127.54mm) - just let it auto rotate it. Supports for long overhangs are recommended (I used auto tree supports). No screws (other than for securing…
Für meinen Virtuellen Flipper (VPin) habe ich eine einfache und kompakte PC ATX Halterung gebraucht. Es sind vier Druckteile notwendig. Das linke und mittlere hat eine Aufnahme, um das Netzteil darunter festzuhalten. In dem Beispiel ist…
Die ist ein PC case für Matx motherboard und maximal 2slot pcie grafikkarten Sehr minimalistisches aussehen. Benötigte Teile ⌀ 6 x 90mm Stange (material egal) → für befestigung von der Rückplatte Kunststoff Leim Nutzbares Material: PLA,…
micro ATX board standoff. made it so i can have my mother board a little bit off the table so it can sit flat on the table top. the motherboard model is asrock h61m-vs. the screws for it are original motherboar screws and they just screw…
little remix that extends the original somewhat. (M : Medium) made it 2.35cm deeper to fit matx asrock motherboard
BeamCase is a system theat allows you to create your own case with the combination of 3d prints and Makerbeam XL profiles (or similar 15x15 aluminium extrusions). BeamCase (m)ATX is a system optimized towards compact builds with full size…
This plate allows an ATX power supply to be mounted in a IPC-E450 4U rack server case. It might work in other cases. I used 4x 4*10mm bolts to attach the plate to the case. I recommend printing it in PETG / CF-PETG, better suited than PLA…
Motivation After printing the original ATX mounting bracket found the clip-on mounts a bit flimsy, so besides drilling them out decided to make a remix for future needs. Files Files with suffix _source are the ones used to render the STL…
Here is an adapter to allow mounting and using an FSX power supply in an ATX case. The screw holes in place of ATX PSU metal threaded holes are sized for steel screws to self-tap (even if not technically self-tapping). In my tests with…
A simple two-part holder for standard ATX Power supplies Mounts an ATX PSU to a flat surface using four M3 screws
Summary This is modified from a mATX board make by lightofhonor to be able to fit a full-size ATX motherboard and PSU. I had an old built PC laying around and wanted something smaller and different that I could print. All of the parts…
Just a replacement for missing I/O-shields Fitment is better than the picture suggest.
Just a replacement for missing I/O-shields Fitment is better than the picture suggest.
Description This is a printable* testbench for those who need a platform to easily access, swap, and diagnose hardware on their PC. Instead of a case this motherboard stand lets you easily swap CPU, GPU, or RAM. The testbench features a…
Simple ATX support structure which can be used to create a small open air storage cluster, or even just a single nas. It can fit any miniATX/mATX/microATX motherboard (and probably bigger since it's put upside down) and 4 standard 3,5"…
If you have an old ATX power supply at home, you can easily make a portable lab power supply with these few parts. These are the parts you need for assembly: - the printed parts, in the colour you like - glue the graphic elements and…
This tiny modification allows you to add Front-IO to your Beamcase ATX. Ive included Magnets to be able to have a cover to hide the IO if you dont want it visible at all times. The Mod also comes with an attached bracket to screw to one…
DIY mATX PC Mount with hook for Skadis. petg, 5walls, 50%infill. Motherboard pendant (mATX motherboard supported) Fan Bracket (360 Water Cooling Fan) Vertical mounting bracket for graphics card (need to equip your own graphics card…
So working on motherboards are fun and all.. But one annoying thing is the bracket on the expansion cards. Since they extend below the bottom surface of the board, they will pop out unless you mount it on.. This! This standoff will keep a…
I've re-created the ATX Bench to fit on the wall It also has inserts for the nuts of the fuses and for the terminal I've also added a hole for a 12pin Molex connector I had laying around (you need the version with ears) (Pic is for a…
WIP Here is my ATX Motherboard tray for 2020 aluminum extrusion frame There is also a PSU mount | The Frame | The frame is made of 300mm 2020 aluminum extrusion as shown in the images
These are feet for the corsair carbide series cases, to get a bit of lift under the case. This way it is possible for the PSU to suck in more air from under the feet, because there is more clearance. I've tested them with the Carbide 100R…
I wanted to convert an old ATX PSU into a lab bench power supply. Since none of the designs found fullfilled my needs I created my own design. The features are: 3.3V, 5V, 12V, and GND rails of PSU attached to banana plugs Integrated…
Modified to fit Bambu Lab printer's small bed. Probably not suitable for all ATX boards because of that.
PIKVM case supporting the Raspberry Pi4, USB-c power/hid splitter, RJ45 ATX connector, and a 0.96" OLED display
![Modular ITX/DTX/mATX/ATX/SSI-EEB/SSI-CEB/EATX/XL-ATX mainboard frame/tray [Updated 2026-07-19]](https://media.printables.com/media/prints/35720/images/1199286_159f781c-d9e2-4896-be13-5668e22d36a3/eatxv3.jpg)
