Modular ITX/DTX/mATX/ATX/SSI-EEB/SSI-CEB/EATX/XL-ATX mainboard frame/tray [Updated 2026-07-19]
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple modular PC mainboard frame/tray system intended for open-air or custom enclosure PC builds.
- Rating
- 4.556 / 5
- Likes
- 430
- Downloads
- 3,797
- Makes
- 7
- Views
- 23,535
- Reviews
- 9
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- BSD License
Introduction
This is a simple PC mainboard frame/tray system intended for open-air or custom enclosure PC builds. The intent is to support a broad variety of mainboards from iTX to so-called EATX with modules that fasten together with M4 nuts, bolts, and washers and accommodate standard M3 mainboard standoffs.
PETG-ESD filament is recommended for printing since it manages electrostatic discharge. Most 3D-printed materials including inexpensive rapid PETG are non-conductive and can build-up static charge. I doubt its necessary, but to mitigate static with these lesser filaments, ~28awg wires terminated with spade connectors can be run between a few motherboard standoffs and then grounded to the power supply.
Version log
To-do: Design add-on parts to hold a press-fit I/O shield and PCIe cards. In the meantime, this remix holds the PCI tabs for a dual-slot GPU.
v3.11 (2026-07-19)
Corrected 0.5mm step/discontinuity cosmetic issue on a portion of itx and other parts (thanks to @nanuk)
Added back missing standoff hole to matx-full-extension variants (thanks to @Alterix)
Added "narrow" version of mATX-full-extension for certain mATX mainboards with two ram slots that are just a few cm wider than ITX. (thanks to @Alterix for the idea)
v3.1 (2026-01-17)
M4 fastener holes increased from 4mm to 4.25mm diameter to ease fitment
add "I/O shield" text to indicate orientation of mainboard
added back single piece matx for larger printers like Core 1, P1S, U1, etc.
added 1.85mm "trimmed" versions of "EATX" parts to correct standoff locations for some boards
added fastening holes for upcoming I/O shield and PCIe card holder parts
v3
matx1 piece adds a protrusion for an optional standoff location
itx and atx parts add optional standoff locations for SSI mainboards
re-uploaded files with “medium” detail level to reduce file size
v2
added missing standoff hole on atx2
all standoff and frame holes same size
add 0.25mm filets to all edges
v1.3
matx updated to be 4 pieces instead of 1 to print on smaller printers
v1.2
added SSI mounting holes
recessed landing pads for frame mounting screws
added legible part name inscriptions
v1.1
initial design concept
Required parts per mainboard size/format
mini-ITX/mini-DTX/ITX
1 part (itx.stl)
4 mainboard standoffs
optional: 4 screws to secure frame to other components
DTX
2 parts (itx.stl & dtx.stl)
2 nuts/bolts + 4 washers to fasten parts together
4-6 mainboard standoffs
optional: 4-6 screws to secure frame to other components
mATX (micro-ATX)
4 parts (itx.stl, dtx.stl, matx1.stl, matx2.stl)
4 nuts/bolts + 8 washers to fasten parts together
5-8 mainboard standoffs
optional: 4-6 screws to secure frame to other components
mATX single piece alternates for larger printers
1 part (matx-full.stl or matx-full-extension.stl or matx-full-extension-narrow.stl)
5-8 mainboard standoffs
optional: 4-6 screws to secure frame to other components
ATX
4 parts (itx.stl, dtx.stl, atx1.stl, atx2.stl)
5 nuts/bolts + 10 washers to fasten parts together
6-10 mainboard standoffs
optional: 6-8 screws to secure frame to other components
EATX (SSI-CEB/SSI-EEB/XL-ATX)
6 parts (itx.stl, dtx.stl, atx1.stl, atx2.stl, eatx1.stl, eatx2.stl)
7 nuts/bolts + 14 washers to fasten parts together
9-15 mainboard standoffs
optional: 8-12 screws to secure frame to other components
Notes
M3 mainboard standoffs work best (6-32 work ok too). Holes are 3.25mm tapering to ~2.3mm to grip the standoffs.
M4 nuts, bolts, and washers work well to fasten frame parts together (8-32 also work). Similar sized screws will work to fasten the frame to a metal or wood bottom plate as desired. Washers should be used to spread the load against the plastic to avoid over-tightening and cracking.
10mm z-height - combined with ~6mm high mainboard standoffs provide ample mainboard heatsink backplate clearance and PCIe card tab clearance
Exterior x/y part measurements:
itx: 170.33mm x 171.60mm
dtx: 170.33 x 72.24
matx1: 171.60 x 45.72
matx2: 72.24 x 45.72
matx-full: 216.05 x 243.84 (243.84 x 243.84 extended version)
atx1: 134.47 x 171.60
atx2: 134.47 x 45.72
eatx1: 134.47 x 86.36 (134.47 x 84.5 trimmed version)
eatx2: 170.33 x 86.36 (170.33 x 84.5 trimmed version)
References for mainboard sizes and standoff locations
https://web.archive.org/web/20160817033942/http://www.formfactors.org/developer/specs/atx2_1.pdf
https://www.snia.org/sites/default/files/SSIF/2018-05-31/SSI%20EEB%202011%201.0.1.pdf
https://digitallibrary.intel.com/content/dam/ccl/public/600565-btx-specification-update-rev1p1.pdf
https://linustechtips.com/main/topic/812415-ee-atx-standoff-locations/
https://www.gamersnexus.net/guides/3566-e-atx-is-a-lie-vs-xl-atx-eeb-ceb
https://hardwarecanucks.com/forum/threads/lets-go-team.12383/page-432#post-527475