Open-Frame (m)ATX SFF PC CASE
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Designed to be printed on an Ender 3 S1 (210 x 210 x 270 volume).
- Rating
- 0 / 5
- Likes
- 61
- Downloads
- 349
- Makes
- 2
- Views
- 4,647
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
This model is a remix of the mini ITX design by lightofhonor.
Challenged by my friends at VlogTehnica to modify and print this case for a mATX mainboard.
Somehow, the final design ended up being more suited for an ATX mobo.
In order to print it on my Ender 3 S1, I did have to extend the supports for the GPU. Since I was pretty new with working in Tinkercad, I ended up with very tight tolerances. To make the new GPU pegs fit, I had to sand them down a bit.
You will need 12 rectangular pegs to put it together and some good superglue.
lightofhonor recommends these settings:
3D PRINTING SETTINGS
- .32mm Layer Height
- 3 outer layers
- 3 top/bottom layers
- 20% infill (I used cubic infill)
I used 40% infill for the back and mobo pieces.
Used supports for the GPU pegs.
Video: