Open-Frame (m)ATX SFF PC CASE
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed to be printed on an Ender 3 S1 (210 x 210 x 270 volume).
- Ocena
- 0 / 5
- Polubienia
- 61
- Pobrania
- 349
- Wydruki
- 2
- Wyświetlenia
- 4647
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
This model is a remix of the mini ITX design by lightofhonor.
Challenged by my friends at VlogTehnica to modify and print this case for a mATX mainboard.
Somehow, the final design ended up being more suited for an ATX mobo.
In order to print it on my Ender 3 S1, I did have to extend the supports for the GPU. Since I was pretty new with working in Tinkercad, I ended up with very tight tolerances. To make the new GPU pegs fit, I had to sand them down a bit.
You will need 12 rectangular pegs to put it together and some good superglue.
lightofhonor recommends these settings:
3D PRINTING SETTINGS
- .32mm Layer Height
- 3 outer layers
- 3 top/bottom layers
- 20% infill (I used cubic infill)
I used 40% infill for the back and mobo pieces.
Used supports for the GPU pegs.
Video: