Search results: ender3

Soporte para luz led impresora Ender3 v3 KE

Imprimir con 100% de relleno. Altura de capa 0,16 para mejor acabado. Color negro para que quede mejor en la impresora 3D.

Straight Through PTFE Guide Creality Ender3-v3 KE

I bought a filiment dryer and made this to direct the filiment straight through to the print head Printed it without any supports 8% infill 3 walls

Ender3_NG_TOOL_HOLDER

Tool holder for ender 3 NG

Bed lock leveling wheel clickers - ender3 series - e3max - Gulfcoast Robotics e3 plate

I tried 120 clicks, but was too small and overkill, and the click tactile feedback wasn't strong enough to my taste. So picked 60 to match Klipper minute:second approach when using SCREWS_TILT_CALCULATE. These, fresh at least, have a nice…

Ender3 V2 x axis extender cover

I am planning to mount a purge bucket and a nozzle brush on my ender3 v2 for my MMU upgrade. When I do my research, almost everything I find is mounted on the right side but I already have too many things mounted on the right. The left…

Ender3 Bearing Spool Roller V2

Bearing roller for Ender3 spool. You will need to use a very good adherence to print the pin vertically. And ofc, you will need to print 2 nut models. Bearings are "skate standard" size (608zz for example). All credit and gratitude to the…

Phaetus Dragonfly BMO Adaptor for BMG + Ender3 - 4828630

The Phaetus Dragonfly BMO Adaptor for BMG + Ender3 Phaetus, a supplier of core parts for high - end 3D printing equipment Focus on the upstream market of 3D printing Supreme Pursuit ►Follow Phaetus to get the latest adaptors for your…

Modular webcam arm for clipping on Ender3 V3 KE

E N G L I S H This is a modular, tool-free, plug-in arm for a webcam for the Creality Ender3 V3 KE and printers with the identical Z-axis. No screws or glue are required. The holder is clamped onto the right-hand Z-axis cover and then…

ender3 thermistor

free!

Ender3 v3 SE nozzle wiper

Basic nozzle cleaner before the start of printing. Printed in ABS Quality 0.18 No supports needed, printed 20% gyroid infil Code to be added in the start print section, just after the first line drawing. G1 X1 Y-14 Z0.25 F20000.0 ;drag…

Voron Stealthburner mod for Ender3 and CR10S printers

This is a custom adaptation of the renowned Voron Stealthburner toolhead system designed specifically for Creality CR-10S and Ender 3 series 3D printers. This modification allows you to upgrade your stock Creality printer with the…

Planetary Gear that will print on any Creality Ender3 V1, 2 or V3SE ...

I have opened up the clearances at little so that my Ender3 S1 and V3 SE can both print out working planetary. The clearances are too loose for a modern highspeed printer like a Voron. For my Ender printers the planetary still operates…

ender3 purge bucket

modified to fit on front of ender3 and also use a ptfe tube as a brush. using modified afc macros for poop and kick. i use a modified version of the AFC poop and AFC Kick to eject the filament.

Mantis Toolhead for Ender3 using 40mm stock fan

LANCER pen mount for ender3 v3 se

This model is only compatible with LANCER pens.

Ender3 V2 Improved Hotend

This is a custom hotend with improve cooling that performs really well and supports a BTT Eddy. You could use this with a stock hotend as well.

Ender3v3 se filament runout sensor mount for two inline mounting holes

You will need 4 M3 screws , one longer than 13mm , another longer than 17mm and two longer than 20mm ( can use 4 M3 by 20mm screw too ) and two M3 nuts. The sensor mount mounts on top of the print head wire harness holder by replacing the…

Ender3 V3 SE S2DW Y Bed Mount

Get much more precise numbers with this bed mount for the y-axis. It uses two 3 mm heat inserts No need for X mount, the hole spacing is perfect to mount the S2DW to the hotend cover through the grill using 3 mm bolts.

Filament Holder for Ender3

Filament Holder for Ender3

Sherpa mini extruder mount for ender3.

Sherpa mini extruder mount for ender3

Dial indicator mount for Ender3v3

I wanted to use a dial indicator to level the bed manually, and I couldn't find one for this model. I hope it helps Cheers! Category: Hand Tools

Creality Ender3 V3 KE Screen Etender

This Contraption will allow you to raise the screen 2 inches above upwards from its original position. I had to make this, so the printer sits right in the enclosure.

ENDER3 S1 220X220X270

modelo de Ender 3 s1 con volumen de impresión 220x220x270 listo para usar de base en orca slicer tutorial rapido

Ender3 Pro, Sherpa Mini Mount for Phaetus DragonFly Hotend (Spacer too)

When installing my Sherpa Mini, I noticed the model I had did not align with the DragonFly BMS hotend. So I converted the STL to a STEP and modified with a proper offset. (I did download and modify a mount STL from somewhere but I cannot…

BTT Pad7 Ender3 Direct Mount

I was looking for slim and easy to print mount for Pad7, but it was or side mounts that extend printer size to right, or some huge frame mount that are larger than Pad7. So i ended designing one from scratch, slim, front, and really…

HBVCAM-W202012HD Enclosure for Ender3 V3 KE

Well, this is the first time I post something, currently learning basic FreeCad so this is a poor remix, but just works as intended. The camera holds perfect and points to the nozzle. Any comments are welcome as I'm learning from 0. The…

Mods Ender3 S1_Control3D

Muy buenas a todos los interesados en mejorar vuestras Ender3 S1 y S1 pro Versión 2_11/04/2023 Nuevo ventilador de capa: muchos os habíais quejado de que el ventilador de capa era demasiado difícil de imprimir (y teníais razón). He…

Ender3 Camera Mount

This model was created to mount a webcam to the Ender3. This is a fixed base that slides on the Y Axis pulley bracket. The adapter can be remixed to support GoPro, and other styles of camera mounts. The current adapter utilizes double…

Ender3 S1 Ribbon Cable "Snap" Pack

Creality Ender 3 S1 Ribbon Cable Support Pack Fits E3S1Pro and should fit Plus and Regular version of E3S1 series as well. My personal set have been going strong for over 6 months, with zero issues! No extra hardware is required! Most of…

Ender3 fan shroud

Glue text into place with cyanoacrylate glue.

Ender3 Super Rigid Mod

Makes the printer very rigid!! I found that a small amount of vibration finds it's way along the y-axis and this was my of eliminating it. The way the ender's are built the middle extrusion almost acts like a pivot point to a small…

Bowden Tube Brackets for ENDER3 3V SE

Allows the use of Bowden tubes from Dry boxes on a Ender 3 3V SE or other printer with the same spool holder.

Creality Ender3 V3 KE - Anti shake construction

For people who own this printer, they are familiar with the weak vertical construction. Because of the shaking the printing quality is suffer. So I made this to prevent the problem. After mounting it, the better surface finish was…

Spool Holder v1 Ender3 V3 SE

Spool Holder v1 Ender3 V3 SE

Ender3 V3 KE Horizontal LCD Display Stand

A simple little wedge to mount the display from an Ender3 V3 KE horizontally. I switched to GuppyScreen on my KE, and needed a 90 degree-turned holder, but I was limited because I'd added some supports that got in the way of other models.…

Dragon Burner v8 Ender3 X Plate Mount

You could print it with 0.4mm nozzle and 0.2mm height You would need 4 m3x4x5 heat inserts Update Added Step and 3mf files

ENDER3 V3 KE SILENT FANS FOR PSU & MAINBOARD KIT

Follow this guide for installing: https://www.instructables.com/Ender-3-KE-Silent-Fans-Upgrade/

Nebula Camera Mount - Ender3v2

Z axis mount for Creality Nebula Camera. This will alow you to mount the camera upside down, the part is very minimalistic and flush to the frame. May work on other Ender3 variants. I used this screw to hold the camera in the mount.…

ENDER3V2 / S1 SPRITE UPGRADE DUAL 5015 FAN MOD

I installed this setup on my S1 it is a GREAT MOD! I went to put it on my v2 sprite upgrade and realized it wasn't going to work so I added the endstop mount . You can use this on a S1 as well i made the parts a little thicker and…

Smart Orbiter v3 - Beacon or Cartographer - Ender3 series printers

Step included Smart Orbiter v3, only the original hotend was tested so far, soon the revs nozzle version will be tested and file updated if needed. Beacon probe (standard) (only tested Rev H, but I think Rev D should work too) or…

Ender3, 5 Spool Holder

The reel holder is printed in three pieces, the nut and a two piece spigot that clips together over the original spool holder turning freely. Similar to an existing model but fits most reel sizes with out requiring adapters.

F**k COVID SHIELD MMP V11 by Bruno Horta gcode for ender3 1:33

Versão do 11 do F**k COVID SHIELD MMP V11 do Bruno Horta gcode para a ender3 que demora 1:33 foi o melhor / mais rápido que consegui espero ter ajudado. O STL não tem alterações. Category: People

Screen cover Ender3 v3

Cover to protect the screen of the ender 3 v3 printer

Ender3 V3 SE Tool Holder with filament guide - Remix

Only been tested with PETG but should work with PLA. Original screws is used for mounting No support needed

PETG machine based on ender3

transforme your ender 3 in a bottle recycling machine

Soporte para luz led impresora Ender3 v3 KE

Imprimir con 100% de relleno. Altura de capa 0,16 para mejor acabado. Color negro para que quede mejor en la impresora 3D.

Spool holder rod clip (Ender3V3 SE/KE)

This is a clip to prevent the filament spool from slipping off the rod, made for the Ender 3 V3 SE and KE spool rod. This happen cause of the spool weight and the holder bending. The spool slip off and it is more dificult to turn the spool.

Filament spool stand for Ender3 V3 SE/KE

Sturdy Filament spool stand using included spool holding parts of Ender3 V3 SE/KE. No support/glue/bolt required. Assemble the metal part through this printed base. Print out sample.step and check if it fits to your part. If it does not,…

Nebula mount for Ender3 V3 KE with side spool mount

Modified mount to work better with the side spool mount

Ender3v3 ke/se Sensor Mount

Я спробував кілька тримачів філаментних датчиків, але жоден мені не сподобався. Деякі з них змусили датчик створити положення, де він додав додатковий опір нитці, тому я змоделював свою власну версію. Він схожий на той, що йде в…

Straight Through PTFE Guide Creality Ender3-v3 KE

I bought a filiment dryer and made this to direct the filiment straight through to the print head Printed it without any supports 8% infill 3 walls

Extruder visualizer for the Creality Ender3 S1 Pro with a Sprite Extruder

Reduced the hole to fit the 5mm diameter shaft of the Sprite extruder. I recommend printing in TPU and scaling the X and Y to get a snug fit. If you like my designs and want to send me a tip, you can do so via PayPal ….. Thank you and…

Ender3_NG_TOOL_HOLDER

Tool holder for ender 3 NG

Microsoft Lifecam Ender3 S1 PRO camera mount

Camera mount for ender3 s1 pro

Antitangle extension Ender3 V3

I made a simple extension to add to the antitangle when the thread runs out

Anti-Rattle Bushings for Ender3 V3 KE/SE Y-Axis Linear Rods

The Ender3 V3 KE used to have two screws in the front that would hold down the linear rods in the base housing. Recently, there was a design change and Creality eliminated those screws (they were also too short). Now, on some production…

Ender3 S1 Front Panel Ender3s1.

Front panel for ender3s1 . You will need a larger printer to print it. I printed on longer lk5 pro. It does give you access to the SD Card only. Since my printer connects by UART I only made a slot for the SD Card but in next update split…

BTT Manta M4P mount for Ender3 NG1.2

Bigtreetech Manta M4P mount on din rails for the Ender 3 NG 1.2 printer. Make use of the standard din rail mounts available in the Ender 3 NG project. It uses M3 screws, without brass insert, directly screwed into the plastic.

EBB36 - Orbiter2.0 mount for the Ender3 NG 1.2 toolhead

This remix allows to mount the EBB36 on the new Ender3 NG 1.2 toolhead with the Orbiter2.0. This design by MapleLeafMakers has a nice strain relief for the can cable (this was also extended for a better hold), and can be secured to the…

Ender3S1 Spool holder

Spool holder with two 6804 bearings: a simple and efficient design that's easy to print. The angled body prevents the spool from slipping off, always guiding it toward the center. You’ll need two 6804 bearings (20mm x 32mm x 7mm) and a…

PrinterMods MDD V1.2 WinSinn Ender3 Pro Dual Gear Extruder

PrinterMods MDD V1.2 - https://www.amazon.com/gp/product/B07SXCWZBK/ref=ppx\_yo\_dt\_b\_asin\_title\_o03\_s00?ie=UTF8&psc=1 WinSinn Dual Gear Extruder -…

Ender3V3 Z-Axis Nebula Camera internal holder

I made this nebula camera holder for my Ender-3 V3, because other holders I found are incompatible moving with z-axis and the side spool holder. Mount photos with test pieces Replaced original M3 screws with longer ones (10mm)

Ender3 Reverse Bowden Adapter with Cable Management

Combined two models to provide a reverse bowden solution alongside cable management. You'll want to print this on its edge with the face of the Bowden adaptor with a brim. You will need longer screws for mounting this as the spacer adds a…

Ender3v3SE Screen Mount - RaspberryPi4b Octoprint

Version 2 now available: https://www.printables.com/model/1219990-ender3v3se-screen-and-octopi-mount I have left this up so that the basic screen or printer mounts can be used still.…

Nebula Camera Mount Ender3 S1 with Cable Clip

I've updated this version with a cable clip to prevent the Nebula camera mount from loosening over time. Inspired by the original design by @NS1PRO_1722488 www.printables.com/model/770497-creality-nebula-camera-mount, this mount allows…

Nebula Camera Mount Ender3 S1 v17 with Cable Clip

I've updated this version with a cable clip to prevent the Nebula camera mount from loosening over time. Inspired by the original design by @NS1PRO_1722488 , this mount allows the camera to follow the print progress unobstructed by the…

Creality Ender3 V3 SE

Z rail holder without gluing or drilling. It requires 4 pieces, 3x10 screws and washers. The bottom two screws should be placed in place of the cover fixing screws. The model is quite narrow, you have to press hard. Two brass insert nuts…

Bed lock leveling wheel clickers - ender3 series - e3max - Gulfcoast Robotics e3 plate

I tried 120 clicks, but was too small and overkill, and the click tactile feedback wasn't strong enough to my taste. So picked 60 to match Klipper minute:second approach when using SCREWS_TILT_CALCULATE. These, fresh at least, have a nice…

Ender3 V3 SE Carriage assembly - reference design

I wanted to know if some mod is available for my new Ender3 V3 SE printer, but it's gantry mount plate seem to have not been documented/modelled yet. So, I made this reference model assembly for the modding community. The base metal…

Satsana Duct (Ender3 ) for Nebula bracket + cr touch + g sensor

This is a Satsana duct remix to fit the crtouch holder that also has the vibración sensor from the nebula pad without the need to set a x or y offset as the cr touch stays as in the original place Same settings as the original this was…

Ender3 V3 KE/SE Filament sensor cover +cleaner

A filament cleaner and sensor cover, just press “print”, glue in the magnets and add in a sponge! Print time : ~30min, on my Ender3 v3 KE. • PLA/PLA+/PLA Matte • 0.4mm nozzle • Print in place • NO INFILL • NO SUPPORT • 0.2mm ≤ layer hight…

Suporte de rolos de filamentos (1kg e 200g) para Creality Ender3

Adaptador para suporte de rolos de filamentos da impressora Ender 3. Posiciona o rolo de filamentos no meio da coluna Z de forma que o filamento é direcionado ao motor de extrusão com menor curva. A parte maior é fixada no perfil do topo…

Ender3S1 ADXL345 Resonance Testing Probe Mount (Bed+Extruder 2-in-1)

Remixed from the original to reduce the size a little, and add mounting holes for Ender3S1 extruder. You will need two M3*4mm heat-inserts and two M3*5mm screws. Extruder mount is done on the top most 2 screws that hold the extruder to…

Heat Set Insert Press from your Creality Ender3 V3 KE

If you converted your Creality Ender V3 KE/SE from rods to rails this tool is for you! Y rails upgrade I did - https://www.printables.com/model/694446-ender-3-v3-se-ke-y-rails I was in this situation - upgraded my printer and didn't know…

Ender3 V3 KE/SE Light bar mount & diffuser

• PLA/PLA+/PLA Matte/PETG/ASA • 0.4mm nozzle • Print in place • NO SUPPORT • 0.2mm ≤ layer hight (recommended) • Light bar: https://www.aliexpress.com/item/4001075324542.html?spm=a2g0o.order_list.order_list_main.53.39f21802Khdep • USB…

Ender3 Klicky PCB - Carriage Mount - Volcano (long) Hotend

I purchased a Klicky-PCB for use on my Voxelab Aquila and saw Kevinakasam's KlackEnder-Probe afterwards. I liked the idea of the main probing mount attaching to the belt connectors of the stock Ender3 carriage. I remodeled the mount to be…

Support bobine pour ender3 / ender 3 v1

Different modéle de support bobine, ajout dans le temps de nouveau support 0.2 15%

Creality ender3pro fan duct

Creality ender3pro fan duct

MufflerMod - Ender3 V3 SE silent setup

Description This is a mod to make your printer quiet and still be symmetric with a nice outside shroud to cover everything inside. This design is intended to be the one to upgrade your Ender3 V3 SE from start: works on stock Ender3 V3 SE…

Ender3 S1 SpriteBurner Backplate 4020 Fan 0 Y Offset and PTFE holder and Filament Cutter

A brand new design of a backplate for ender 3 s1 sprite extuder. Mainly designed to be used with my SpriteBurner cooling duct v2. New update has a filament cutter for my hopefully upcoming multi filament build. Uses a 4020 hotend cooling…

Adjustable Ender3 S1 Pi Klipper Camera Mount

Raspberry Pi Zero 2 W camera circuit board measures 25x24mm. The model file is split into parts, allowing you to customize the lens frame to fit different sizes. Two rotating axes allow for adjustments to the tilt and horizontal rotation…

Stable LCD mount [holder] for the Ender3 S1 Pro

A stable LCD mount for the Ender3 S1 Pro, improving the quality and comfort of operation when the printer is placed inside an IKEA LACK enclosure (but not limited to it). The mount is rotated 45 degrees relative to the printer, with a…

Soporte Pinza Ender3 v3 Plus

Soporte para pinza ender3 v3 plus Diseñé este soporte para ubicarse en el costado izquierdo del marco de la impresora para tener rápido acceso a la pinza de corte.

Soporte filamento ender3 v3 plus

Soporte para filamento para impresora con rodamientos Este diseño esta ajustado para se adaptable al anclaje de ender3 v3 plus pero si se reemplaza el anclaje por una de las bases normales sirve para cualquier impresora Está diseñado para…

Spool holder Adapter for small spools Ender3 v3 Plus

This print clips on to the spool holder making it compatible with the small promo spool that comes with the printer

Light bar holder for Ender3 v3 SE

One of my first 3d printing design to upgrade my 3d printer. I bought the LED bar from Aliexpress and needed a way to attach it https://www.aliexpress.com/item/1005005824135377.html Requires 2x M2 screws and nuts.

Ender3 Pro Rear electronic left enclosure with U2C and Wago221 mounts

Remix of TeachingTech left Raspberry enclosure with additional U2C and WAGO ( kl4appdrachen ) mounts. You should use 25cm right angle USB cable to connect U2C to main Raspberry board.

Plastic razorblade holder with gantry clip for Ender3 V3 KE

I had an empty spot on the right side of my printer and was tired of my blades being scattered in the drawer. This remix allows the holder to be clipped to either side of the gantry of the Ender3 v3 KE. Clip is slightly loose fitting so…

Ender3 V3 SE Light Bar

Reinforced, more reliable, no tools and easy to print model for LED strip that helps you with clear view on your prints. Groove on BAR for LED strip is 9 mm. I used 8 mm LED strip. It helped me attach in straight line. Material: PLA…

Ender3 v3 se Filament guide With cat ears

Print flatface down, does not need supports.

Ender3 HotEnd Cable Tray (Remix: with BL-Touch OEM mount)

With the Creality3D BL-Touch mount, the original cable tray does not fit over the carriage plate. This one does :) Category: 3D Printer Parts

Ender3v3 カバー

フィラメント交換時の作業軽減

Ender3V3

TeflonTubeStopper

Strain Relief Bracket for Ender3 using Direct Drive Sherpa Mini

I needed a strain relief for the power cables from my direct drive Sherpa Mini on a modified Ender 3 (variant). The original model by AndresDesigns was perfect except the bottom two mounting holes did not clear the x-gantry on my…

Ender3 ATX PC.

~---:::(WORK IN PROGRESS):::---~ Update 5 5/17/2026 Added minimal 140mm fan mount with airflow director + expansion card support v2. Update 4 5/3/2026 | Added Keyboard holster comprising of two parts, top and base. Located in the Extras…

TPU feet for Creality Ender3 S1 Pro and alike (S1/S1 Plus and probably V3 SE/KE)

Besides of noise and vibration damping, which works pretty well in my personal opinion, the primary goal was to lift the Ender3S1Pro print bed to the same height as the window of the enclosure tent at about 12.7cm/5in* for a good first…

Slender3V2 - Universal hotend assembly featuring built in Z endstop. V6, BMG extruder

My main design consideration was make an easily serviceable hotend assembly. Its made out of 4 main parts: X carriage, belt fix, main body and cooling parts.. I used parts that I could gather for cheap, for example a MGW9HC linear…

Ender3 V3 SE Kamera-Halter

Es ist eine eigens Konstruierte Kamera-Halterung für einen Ender3 V3 SE

Ablage für Ender3 V3 SE

Ablage für Ender3 V3 SE mit 3 Fächern und seitlichem Kabelhalter

Easy Rotate Knob creality ender3v3 se

This button is designed as a cover for the main button of a 3D printer. It features a marking on the surface to indicate the direction of rotation: turning it to the right increases the height, while turning it to the left decreases the…