1 / 8
eGPU Thunderbolt chassis for EXP GDC TH3P4 + ATX PSU [165x165x330mm - 9 liters] — image 1
1 / 8

eGPU Thunderbolt chassis for EXP GDC TH3P4 + ATX PSU [165x165x330mm - 9 liters]

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A two piece eGPU chassis to fit the EXP GDC TH3P4 Thunderbolt card, ATX PSU, and a full length GPU

Rating
5 / 5
Likes
58
Downloads
733
Makes
3
Views
5,485
Reviews
2

Updated at source:

Model information

Category
Computers
License
Creative Commons — Attribution

Intro:

The motivation for this design was to build an eGPU with a $250 budget with used parts with a 10 liter maximum volume. At 165mm x 165mm x 330mm, it comes in at 8.98 liters. 

Full assembly guide here:

https://dancharblog.wordpress.com/2023/03/27/diy-thunderbolt-egpu-with-exp-gdc-th3p4-and-3d-printed-chassis/

 

Required parts:

  • ATX power supply
  • EXP GDC TH3P4 Thunderbolt card
  • PCIe GPU (AMD, Nvidia, etc.) or other PCIe add-in-board
  • 6x M4x10mm bolts with nuts

Optional parts:

  • 2mm thermal pads to modify Thunderbolt card
  • 140mm or 120mm cooling fan
  • additional M4 nut, bolt, and large washer to secure heavier GPUs
  • zip-ties for cable management
  • 4 adhesive rubber feet

Recommended print settings:

  • PETG - you'll need ~800g of filament (ABS and PLA ok too)
  • no supports
  • 0.25mm layer height
  • 3 perimeters
  • 10% infill
  • 0.6mm or larger nozzle for faster/stronger print
  • Each part can take 12+ hours depending on your printer settings

 

Tags