PC Case - Compact Fullsize ATX
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
PC Case made with 2020 extrusions and 3D Printed parts
- Rating
- 0 / 5
- Likes
- 91
- Downloads
- 381
- Makes
- 0
- Views
- 6,896
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
PC Case: I was building an inexpensive PC with a very tight budget. I sourced parts from Marketplace, eBay, etc which meant I ended up with some oddball hardware, but I still wanted it to be compact. So I made a case around an ATX board with an SFX PSU and lots of airflow. The tolerances could probably use some work but it did go together. I built this for myself but if it can be of use to others please enjoy.
Full size ATX Board
SFX PSU
120mm Fan mount
Cable Management Bay
Even a Voron Disco-On-A-Stick LED mount if you feel like adding some RGB
Uses m3 threaded brass inserts, m3 hammerhead t-nuts, and m3 flat countersunk screws.
Hole for a 12mm button at the front
Print settings for the mesh are in the photos.