PC Case - Compact Fullsize ATX
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
PC Case made with 2020 extrusions and 3D Printed parts
- Ocena
- 0 / 5
- Polubienia
- 91
- Pobrania
- 381
- Wydruki
- 0
- Wyświetlenia
- 6896
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
PC Case: I was building an inexpensive PC with a very tight budget. I sourced parts from Marketplace, eBay, etc which meant I ended up with some oddball hardware, but I still wanted it to be compact. So I made a case around an ATX board with an SFX PSU and lots of airflow. The tolerances could probably use some work but it did go together. I built this for myself but if it can be of use to others please enjoy.
Full size ATX Board
SFX PSU
120mm Fan mount
Cable Management Bay
Even a Voron Disco-On-A-Stick LED mount if you feel like adding some RGB
Uses m3 threaded brass inserts, m3 hammerhead t-nuts, and m3 flat countersunk screws.
Hole for a 12mm button at the front
Print settings for the mesh are in the photos.