ATX Open PC Frame
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I needed a pc case for a living room pc so i made my own pc frame design.
- Rating
- 4.968 / 5
- Likes
- 1,597
- Downloads
- 5,173
- Makes
- 36
- Views
- 42,245
- Reviews
- 31
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
I needed a pc case for a living room pc so i made my own pc frame design as most of the models here are for ITX motherboards.
I made it the simplest with the least filament amount I could and in a way it fit on a standard 220 x 220 bed.
To build this PC frame you will need:
-M3 threaded inserts
-16 M3x20 screws
-4 M3x10 screws
-2 M3x30 screws for the PSU
-Motherboard Standoffs (3D printed spacers can do the job)
PETG filament would be safer for this print to resist temperatures but I printed it with standard PLA and had no issues.
EDIT: Added a revision of the two bottom side parts to allow better compatibility with more PSU. Also added more holes to the middle bar for the SSD bracket mounting.