ATX Open PC Frame
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I needed a pc case for a living room pc so i made my own pc frame design.
- Ocena
- 4,968 / 5
- Polubienia
- 1597
- Pobrania
- 5173
- Wydruki
- 36
- Wyświetlenia
- 42 245
- Oceny
- 31
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
I needed a pc case for a living room pc so i made my own pc frame design as most of the models here are for ITX motherboards.
I made it the simplest with the least filament amount I could and in a way it fit on a standard 220 x 220 bed.
To build this PC frame you will need:
-M3 threaded inserts
-16 M3x20 screws
-4 M3x10 screws
-2 M3x30 screws for the PSU
-Motherboard Standoffs (3D printed spacers can do the job)
PETG filament would be safer for this print to resist temperatures but I printed it with standard PLA and had no issues.
EDIT: Added a revision of the two bottom side parts to allow better compatibility with more PSU. Also added more holes to the middle bar for the SSD bracket mounting.