Modcase Evolution mATX Multi-Material Side Panel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of the side panels from the Modcase Evolution case. Very nice baseline design, I highly recommend it!I…
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 1128
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remix of the side panels from the Modcase Evolution case. Very nice baseline design, I highly recommend it!
I wanted my side panels to have a bit more flare to them, so I made them into multi part pieces! The mesh can be printed in a separate material to the frame, such as PLA for the mesh, and PETG for the panel frame.
Do not print the frame pieces in PLA! They will warp over time.
I did this as I wanted a silk bronze filament, and PLA is one of the only materials with a large variety of colors and finishes.
The mesh is glued into the frame with CA glue; be sure to have some clamps around to hold it in place. They have held up fine for the first week of use, should be fine for long term.
Category: Computer