Super Simple mITX/mATX Testbench for SFX and ATX Power Supply
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Trying to make a super simple PC test bench for ATX/SFX power supplies that can be printed on smallish printers.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 121
- Wydruki
- 0
- Wyświetlenia
- 817
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Share Alike
Trying to make a super simple test bench for SFX and ATX power supplies that can be printed on smallish printers.
Motherboard holes are aimed for 3.05mm which should allow for #6-32 standoffs to self-tap, no heat-insert necessary. You can drill out the holes if your printer's accuracy is a bit off, or you want to flip the standoffs!
PSU holes are 4.0mm so that the #6-32 screws should pass through relatively easily to mount the power supplies.
I wanted the PSUs to sit on the bench underneath, so that the weight isn't on the mounting points, so aim to have the fan facing UP towards the motherboard!
Release Version 1 (29/7/25)
- Files now have 3.05mm holes designed for screwing in stand-offs
- Uploaded tested functional version of mITX/mATX test bench files
- Uploaded STL components for ease of remixing / free use
[18/7/25 vALPHA] I am only running test prints now, so will try to check if mounting points line up soon! – One of the motherboard screw holes was misaligned, and the 4mm screw holes are a bit too big to screw standoffs into.
[19/7/25 vBETA] Moved the misaligned motherboard mount point, changed holes to 3.85mm (hopefully without moving the centre-points). Added SFX power supply mount plate to reverse side. → These had oversized holes, removed these files