1 / 1
ASUS B85M-G R2.0 mATX 1U Rack Mount Tray — 10" Server Rack — zdjęcie 1

ASUS B85M-G R2.0 mATX 1U Rack Mount Tray — 10" Server Rack

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

1U open-frame rack mount tray for ASUS B85M-G R2.0 mATX motherboard. Fits 10" server rack. Prints in one piece on 256mm.

Ocena
0 / 5
Polubienia
8
Pobrania
90
Wydruki
0
Wyświetlenia
508
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

ASUS B85M-G R2.0 mATX 1U Rack Mount Tray — 10" Server Rack

A custom open-frame 1U rack mount tray designed specifically for the ASUS B85M-G R2.0 micro-ATX motherboard, built to fit a 10" server rack (260×200mm interior). Prints as a single piece on most consumer FDM printers.


Features

  • Open skeleton frame — no unnecessary material, great airflow and cable access

  • Four corner rack ears with rounded top edges and 3 horizontal oblong M6 slots per ear (16mm center-to-center spacing to match standard rack rail hole pattern)

  • Six motherboard standoff bosses precisely positioned for the ASUS B85M-G R2.0 mounting hole layout

  • 2mm standoff height — just enough clearance for solder points on the board underside

  • 1U height (44.45mm) with cross rails and longitudinal rails for rigidity

  • Slots are sized for M6 screws with standard clearance (6.6mm wide)


Compatibility

Spec

Value

Motherboard

ASUS B85M-G R2.0 (Micro-ATX, 233×193mm)

Rack type

10" server rack

Rack depth

200mm

Rack height

1U (44.45mm)

Overall print size

251 × 200 × 44.5mm

Mounting screws

M6 (rack ears) + M3 (motherboard standoffs)


Print Settings

Setting

Value

Slicer

Bambu Studio (or any FDM slicer)

Filament

PLA+ recommended

Nozzle temp

Per filament spec (typically 220–230°C for PLA+)

Bed temp

Per filament spec (typically 60–65°C for PLA+)

Layer height

0.2mm

Sparse infill density

40–50%

Wall loops

4

Supports

Auto (needed for the horizontal ear slots)

Print orientation

Flat — Z-axis up, tray face down on build plate

Note: The higher infill and wall loop count are important for the rack ears, which take screw load when the tray is mounted. If your slicer supports per-object settings, you can use 25% infill on the rails and 50% on the ears.


Assembly

  1. Print the tray

  2. Insert M3 brass heat-set inserts or M3 screws directly into the standoff bosses (pilot holes pre-drilled at 1.6mm radius)

  3. Mount the ASUS B85M-G R2.0 motherboard using M3 screws

  4. Slide into your 10" rack and secure with M6 screws through the ear slots


Motherboard Hole Positions (from I/O corner, X,Y in mm)

Standoff

X

Y

S1

6

33

S2

163

10

S3

209

10

S4

6

165

S5

163

165

S6

209

165


Notes

  • Designed and modeled parametrically — if you need to adapt it for a different mATX board or rack depth, the hole positions and frame dimensions can be adjusted

  • Tested on a Bambu Lab A1 (256mm build plate) — fits with clearance

  • Filament used: PLA+


If this works for your setup, leave a like and let me know in the comments! Happy to help adapt it for other boards or rack sizes.

Tagi