Liczymy pasujące modele…
New version of the wallet available here Update 04/08/2022 : I changed the tolerances, it should now be less tight for the cards. I also made a little change to prevent the last card from going behind the mechanism. These updates are only…
Wydruk około 2,68 €–3,28 € nettoWstępna wycena jednego wariantu
This is a collapsing Katana sword designed to be printed as one part. Its only 182mm high when printed but expands to over 825mm in total length! The Replaceable Single Edged Curved Blade Version is available to my Clubs members. Supports…
Wydruk około 10,75 €–13,14 € nettoWstępna wycena jednego wariantu
I decided to modify my previous model (5 in 1) Fidget Toy Spinner I wanted to get rid of the bearing and make the whole fidget smaller to fit the keys well. And as a bonus, I modified the model for print in place. So just print and click…
Wydruk około 0,62 €–0,75 € nettoWstępna wycena jednego wariantu
one Foot is as big as the printbed from the MK3S so you can only print one at a time It is not a perfekt fit but close enough and does the job gerat I printed them with a 0.6mm Nozzle with 0.2 mm layerhight and 4 outer shells. hope you…
Wydruk około 4,16 €–5,09 € nettoWstępna wycena jednego wariantu
If you create BambuSlicer profiles feel free to add them here: https://makerworld.com/en/models/221532 The Planter is designed to be printed with a 0.4 nozzle (and the same line width). That way the blades of the spiral will always be…
This collapsing Katana is designed to be printed as one part. The Replaceable Blade Version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how to print…
A Temperature Tower designed to find the correct temperature for your filament! The included .gcode is sliced using Simplify3D with the "Multiple Processes" tool to set the temperatures at different layer heights. Take a look at the…
Chances are you’ve heard about ocarinas thanks to the Nintendo game The Legend of Zelda: Ocarina of Time, whereas the name suggests, it plays an important role. Print this one in Blue and use to Triforce collar to make it look like the…
This version of the Drill Sword prints complete all as one part. The Replaceable Blade Version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how to print…
This print was a request from someone, I figured why the heck not? I honestly learned a lot through the design and print of this one about clearance dimensions required for 3D printing without having the layers stick together between…
Hero Me Gen7.4 is a modular printhead platform for 3D printers with excellent part cooling and the most compatibility across 3D printers, hot ends, extruders, ABLs, and other components. The Hero Me Gen7 is all about choice and personal…
This phone/tablet stand is designed to be as universal as possible, print in place, and fold flat while being very durable. It comes in 3 sizes. Each variant is designed around its specific load. Small - 52x83x3mm - About the size of a…
Official Remix "Extra Size Cat" is released!! https://www.printables.com/model/1146999-official-remix-flexi-extra-size-cat-print-in-place Since there were many requests for longer cat, I decided to release it as an Official Remix. This…
This is a collapsing Lightsaber designed to be printed as one part. Its only 205mm high when printed but expands to over 950mm in total length! Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on…
TRAILER An elegant bag clip designed to be printed in place as one piece with minimal supports. Once printed, the clip is freed into 3 hinged components. The design uses a specially designed cam to give the user a mechanical advantage and…
Special herringbone planetary gear. The only way you can manufacture this piece is 3D printing as the interlocking gears cannot be assembled afterwards. Author: Emmett Lalish Print instructions Print takes roughly 3 hours at 100 µm layer…
If you enjoy this model, take a look at the new F23 Glider: https://www.printables.com/model/456057-f23-ultralight-glider-print-in-place or a glider starship:…
Instruction Simply take the two blocks align to the microfiber and cut to the same rectangle size. Wrap the microfiber around the edge and crimp it down. Updates March 23, 2024 Added an alternative knob for thin cloth or sandpaper.…
Taking inspiration from my original fidget toggle switch , I designed a print-in-place version that uses about 8 grams of filament and takes about 20 minutes to print on my X1C. This model is experimental (it's definitely still a…
9 ¾ train platform sign I designed from Harry Potter Studios / Hogwarts Express Few ways it can be mounted: - Mounted to a wall etc with screws - Can be used with Ikea Skadis - Can embed magnets see the remix to embed magnets . Make a…
Official Reference CAD Envelopes for Logitech Keyboards Provided as part of Logitech’s Adaptive & Accessibility Initiative , this package contains simplified 3D reference models (dummy CAD envelopes) for three of our flagship keyboards:…
Background The PLAb System We all love our friends at ThorLabs, but sometimes you just need a quick part and you don't have the cash or time to wait for one to arrive with your order of Lab Snacks. The solution, 3D printable…
These are knobs that you can print with multiple layers - slice the grey inset light colour first, then slice the main body of the knob second and run the G-code twice.
Replacement level for the open/close function of a Bonavita "Wide Base Porcelain Immersion Dripper" coffee maker. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Infill: 50 Filament: n/a PETG Category: Kitchen…
Sonos Beam Mount for Apple Studio Display (height-adjustable stand) A one-piece bracket that hooks into the cable slot of the Apple Studio Display's tilt- and height-adjustable stand and holds a Sonos Beam (Gen 1) right below the display.…
A retaining wall for the corner of your planted aquarium. Holds back substrate to create a layered effect with deep substrate your plants will love at the back and plenty of room for fish and shrimp activities at the front. The dimensions…
NOTE: This is just the brown plaque! The actual Wolf Coat Hanger made by @3dprintable_by_lucas is a paid model available here . I absolutely loved this design but felt it looked strange just hanging from a nail on the wall. Thus, I…
Non-destructive mounting for aftermarket speakers for the Mazda CX-30 and other derivative Mazda speakers of the current generation audio system. Mounting holes designed for the Mark Audio CHN-50P to have enough clearance from the door…
First of all. Rules of the game are included as PDF for 3 player version but will work for 2 as well! also you can find a video of the rules here: This 250mm diameter Fidchell board is divided into parts, making it perfect for a…
Diseño original con detalles de corona con cruz y fácil montaje de las dos piezas. El diseño al estar creado en dos piezas se puede imprimir sin ninguna complicación y facilita la omisión de soportes en la herramienta de corte. Fácil…
Plastic bead sorting trays make it easy to sort and organize your diamond rhinestones for your DIY art and craft projects. The diamond rhinestone plate tray can also be used for diamond painting and nail art dotting, making it a versatile…
This is a vertical 1 inch template for the pantorouter. It installs and uses the same bit and guide bearing as the factory templates but mounts vertically. It prints easy but will need supports underneath on the bed. The embossed text…
RU: Версия для другого экрана Отличия: кнопки сделаны вертикально, не сделана подставка. Важно - в файлах версия для использования вплавляемых гаек. Из-за странного, на мой взгляд, расстояния между осями крепления - предлагаю сначала…
This model is compatible with the lego system.
This model is compatible with the lego system.
This is a mount I designed to house a replacement speed controller module that I used to replace the OEM control board on my Harbor Freight 7x10" mini lathe. The OEM boards have a tendency to burn out really easily when under load, so…
Simple replacement for the keyboard foot, fits K270 K260 K275 K200 models
A drilling guide for door handles. It's slightly parametric. Here is the link to the Onshape project:…
3D printed tool to replace Honda Tool 07916 - KA50100 Used to remove and install the steering stem nut on 226 different Honda Motorcycles. The nut I designed this part around is P/N: 53229-MN1-650 You can check fitment by clicking here ,…
display mount that fits on to your laptop display. can be adjusted for sizing for your display as well as your laptop.
I wanted a minimalist design that keeps the filament off of the z-screw, but also avoids any drag on the line. Print Settings Rafts: No Supports: No **Resolution:** .2 Infill: 40% **Filament:** generic PLA any Notes: The filament should…
Modular octagonal plant support The plant support comes in three sizes, wich all fits together - S fits to L, L fits to M, M fits to S, L fits to L ……. and so on. This allows you to put together a completely individual plant support and…
This double-sided 3D planter is not only a modern and functional decorative piece, but also a smart solution to keep your keys organized. On one side, you have space for your favorite plants, whether succulents, cacti or small plants, and…
This model is shaped in a circle, and a sine wave shaped structure is created around and up/down along the model. It can be printed in both regular and vase mode. For regular mode an infill of 8% should be sufficient. The filament used in…
Easy to print brackets to mount the Bambu Lab A1 mini build plates under the desk. Each brackets feature two screw holes for 3mm screws. There are two versions available. One holding tree steel sheets and the other holding five steel…
6 Part Gridfinity baseplates for the Husky Tool Storage 27 in. W 5-Drawer Gloss Black Rolling Tool Cabinet . UPDATE: Tweaked and added Tolerances section, as well as OpenSCAD file. Drawer Dimensions: 585 mm x 381mm . Tolerances: There…
Description A tool to hold microfiber towel to clean and scrape build plates with ease. Filament used in photo: BAMBU LAB ABS BLACK How to assemble: Size of the microfiber towel: W : 4.5cm L : 10.5cm SCRAPE: CLEAN:…
As Aqara U200 doesn't have 10mm diameter adapter, and especially for my EVVA 4KS deadbolt with hole for retainer - I had to model it by myself. Made few iterations before to gain perfect for my purposes. * By the way, it should also fit…
This is ongoing project and will still require development! My personal progress blog on the project can be found here . As I hit major milestones in the project, I will periodically update those files. I'm receptive to the idea of…
Introduction I'm sure everybody has seen the beautiful 30th anniversary PS5 Pro release . The USB-C cable housing they included for the cable was a very cool design, so I thought maybe us existing PS5 owners can also share some of that…
This is a display stand for the bento boxes from Awajiya/淡路屋 in Japan. It's not meant to be a model train that can roll around the tracks (despite the wheels do run 😉.) I've had a chance to get all three variants of the JRFreight…
Nice elegant planter, you cannot fill it with water but you can easily hide a 2 liter cut bottle inside (see photo). I used PLA WOOD and 0.6 nozzle.
I made this modification so that the printer would take up less space on the shelf. Printed with support for the display locks only.
This is a BambuStudio .3mf file with 16 5x5 Gridfinity baseplates stacked for a single print. The spacers must be printed in a different material. This can be PETG or PLA support material.
Changelog: Intro This is the Breezebuggy, a high performance ride-on outdoor use play car intended for children ~3-9years old. The car has been thoroughly tested and iterated upon to reach a high level of maturity in printing, assembly…
3D recreation of the Wisconsin Electric Machines and Power Electronics Consortium (WEMPEC) logo: wempec.wisc.edu I used an air compressor nozzle and braided fishing line to pull the LED Filament and wire(s) through the hollow channels.…
Printed these upside down using 0.4 mm nozzle with PETG and PLA. The (TPU) seal goes in the lid. Use a 5" hole saw to install. Added cover with webbing for installation require higher weight load. Added blank cover with no finger holds.
all parts are printable on a 220x220mm printer and all flat parts are CNCable on a 3018 PRO CNC hardware list 1.BEARINGS: 3x8x4mm X16 5x16x5mm X20 8x22x7mm 608 2RS X16 MGN12 C block + 50mm rails X2 2.SCREWS: M2x8mm X34 M2.5x10mm X20…
Fusion360 Parametric Laser-Cut Gridfinity Base Plate by The Mad Noodle Introducing a versatile and customizable Gridfinity Base Plate designed for laser cutting! This fully parametric design, composed in Fusion360, offers flexibility of…
A commercial license for the Cat Planter V3 Only, which includes the single and also multicolor version
A simple adaptor to connect the Makita 2012NB thickness planer extractor shroud to a 63mm flexible hose in a dust extraction system gcode reflects a PLA print, but as my mini hates PLA its a really slow config
Platform for IKEA SKADIS for the standard PRUSA filament spool holder. Print settings: Printer: Prusa Mini Nozzle: 0,4mm Material: PLA Layer Height: 0,2mm Bed Temperature: 60°C Nozzle Temperature: 215°C Infill: 100% Supports: no
Need a scratch your back? No problem! Print in place model with lock mechanism. No supports! From fast print with layer 0.35mm to 0.2mm work pretty well. I recommend use PETG. Easy to transport due to fold-ability! Folded version is 140…
4 cylinder print in place hand crank engine Frame of the engine is: 73.5 mm/2.9" long 51 mm/2.0" high 12mm/0.5" thick Material used at 15%, 2 wall outline: 33.07 g/1.2 oz 10,999mm/433 in There are small parts so bed adhesion is critical…
A model that provides a stable, sturdy, and completely reversible mount for your ADXL345 for input shaper calibration. Requires two M2x4mm screws. Print the model, but when it concludes keep your bed heated Screw ADXL345 into the mount…
I wanted to build some kitchen for my child and found various stove knobs. Decided to use this one https://www.printables.com/model/327511-stov but I could not find an base plate / counterplate. So I created one. Countersunk holes to…
Beware: this insert has couple of limitations, I mostly made it for myself, but I thought someone else might find it useful as well. All the available inserts either ditch the game board in favour of the playmat or were designed for the…
The original Mercedes Star on my kids' tractor disintegrated, so I created a replacement one. This is for the Rolly Toys FarmTrac MB 1500 / MB-trac.
This is a custom replacement axle designed for the Tuttobimbo Italian vintage toy train.. If your original axle broke off, this 3D-printed part serves as the replacement to restore your classic toy. Features: Compatibility : Specifically…
I made some modifications to the screen holder from this project https://www.printables.com/model/862834-guppy-screen-display-holder-for-creality-ender-3-v to allow access to the USB port.
This is a guide for aligning the build plate on the Bambu Lab A1 printer I designed in Fusion 360. I have been having problems getting my build plate perfectly straight on my new A1 printer so I designed this to clip on to the right rear…
I create this alternative pedal plates for DC Simracing DC-3 pedals, bigger and softer than the original ones, giving the posibility to use it without shoes. I printed it on PLA but i'm sure that PETG it's better for this use. With PLA I…
A small honeycomb (hexagonal) trellis designed to support household plants. The two spikes at the bottom hold it securely in the soil and prevent plants from tipping. Dimensions: Total height: 261mm Honeycomb height: 200mm Width: 131mm…
Uploading here as it took me a fair while to find it! Useful if/when moving a DCHDMI enabled console from one shell to another and need to drill a new HDMI port opening. This block is for the original DCHDMI board. I believe it is also…
Hey guys, i design my own PS4 500gb under desk Holder! I post here left side!
Hey guys, i design my own PS4 500gb under desk Holder! I post here left side!
This cap replaces the original one that cracked on my TAL water bottle. I have a XL with 5 tools, so I made it for multimaterial. There are 2 colors of PETG, a TPU ring that allows the cap to be deformed and slip back into the original…
WIP - the handle is maybe 0.2mm too long over it's entire length, and there's not enough margin on the “boltway” parts: I cracked my handle slightly while putting them in. But it fit on line, so I probably will not fix this model, unless…
Love the original so please down the files from there. The only things I changed were the lid to accommodate two pipes instead of two and the filter box to fit between the two pipes. This was a very rough and fast remix. It's not perfect…
Meant to be used to play with Play-Doh You can also use it as a key chain with a bit of cord.
A simple, non-intrusive tray to catch the remaining droplets of water after tending to your plants. Designed to stand your plant off any surface and prevent damage without invading on the aesthetics like those ugly brown shop bought ones!…
Each light bar has its own mount and hang on a M8 screw. I found and printed the correct screws for my Vesa with this set: https://www.printables.com/model/653654-screw-set-m3-m4-m5-m6-m7-m8-m10-iso-4017
A collection of ratchet locks ranging from 50mm - 90mm to replace any broken ones. There is a notch on one side of the ratchet lock that is flipped on some ratchets. I'm not sure if this is a left spin/right spin difference, but my cobolt…
A cute one color elephant decor that can be hang on the side of a planter. Should be printed with support. Powered by MakerWorld-AI Scanner (https://makerworld.com/makerlab/ai-scanner)
Two basic tow hooks designed as replacements for broken toys. I presume you can scale these up. Recommend PETG and boosting perimeters. I needed to use supports on the bigger one.
A simple yet working 3D printed bearing, works just fine and can be used for any purpose. Printed with 0.4 mm nozzle. Printing & post-processing Print in highest possible resolution. Minimalize the stringing. Use any lubricant to…
The Verathon Bladderscan BVI 3000 is using 6 cells NiMh 7.2V battery. It is expensive, hard to find, expensive to renew and moreover uses a proprietary charger which is brittle and often missing, super expensive on the second hand market.…
