Helical Self Watering Planters
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A minimalistic pair of self watering planters that only a 3-D printer could create.
- Ocena
- 4,931 / 5
- Polubienia
- 3506
- Pobrania
- 10 741
- Wydruki
- 173
- Wyświetlenia
- 50 199
- Oceny
- 145
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
If you like this design, check out some of my other designs like this one.
What Files to Download
Chose a model based on the pictures below
Single Swipe:
Double Swipe:
Double Swipe Curved:
Also available is the Self Watering Insert:
Print Instructions
It's important to ensure the planter is water tight. Here's some print settings that worked for me. Check out the prusa guide to getting watertight prints too!
Filament: PLA or PETG
Supports: None! All my designs are created to 3d print without support.
Perimeters: 3-4 (to achieve watertight seal)
Layer Height: 0.15-0.3mm
Scale: Multiple people have found that scaling the model up has been useful. Check the comments for some different dimensions.
And finally …. share a picture of your print in the comments section. Choosing two different colors for the Self Watering Insert and the Planter is a fun way to make the print pop, and I would love to see any color combinations you come up with.
-------------------------
Change Log:
6/20/21 - added new version: Double Swipe Curved.
8/3/21 - check out this link for another self watering planter
8/13/21 - set correct scale for double swipe curved planter