Liczymy pasujące modele…
If all your houseplants are dying and only artificial plants are an option, then this tea light is perfect for you. The flower shape creates a unique shadow. It can be printed in two colours. Ensure good print bed adhesion when printing.…
A String Lotus Flower Artwork. Print at 0.24mm layer height. If you are using Bambu Studio you need to change your wall generator to Arachne.
Petg, Plasty Mladec, Blue, nozzle 0,4 mm, MK4 Prusa
This is designed to be used with MagnumDanger's Lego wreath. Based off a piece I had in my Lego bin, I reduced the height a bit to make it more wreathy. No supports are needed in the hole section. But you will definitely need to support…
In my case, I managed to print the Dodecathleon flower pot from the second attempt, after I added the improvements I mentioned in the model description and rotated the model a bit so there were no strictly horizontal planes. See the photo…
This is a set of flowers for that special someone on Valentine's Day. It's based on my Springy Flower Collection found here: https://www.printables.com/model/1100526-springy-flower-collection-update Do not scale down or the threads will…
In response to the increasing number of flower pots in my daughter's room, I created a flower wall to be placed in the window. I was looking for a solution that would shade the window as little as possible. To make it, I used two 120 x 20…
Decorative wall hooks I designed for hanging items in my daughter’s room. I used medium-sized velcro Command Strips to hang them, but normal medium command strips fit too. The design is multicolor friendly. No supports required.
Super Mario Wonder Purple Flower Coin. Print vertically using thin tree supports for best results.
A beautiful 3D printable rose, perfect as a Valentine’s Day gift, decoration, or unique keepsake. This elegant design (13 cm, 3 mm thick) makes a great alternative to real flowers that will last forever!
A nice Flowerpot podest Whatever you think of it ,as it is.
The 3D Daisy Flower model is a digital representation of a daisy, featuring intricate details that mimic the natural structure of the flower. The model is designed to be both visually appealing and functional, making it suitable for a…
This is Flower. Did a quick mount for a series of 10 LED V-shaped channels.: This is my first release, but you can see some of my other work on insta: @nova_pony Post your build! I would love to see it in white.. Print: No supports…
Rose Thermorph. Put into 70°C water and let it morph. Printed in dasFilament PLA and Fiberlogy 40D TPU. Sliced in OrcaSlicer 2.2.0
This is a holder to attach a flower bulb. You can add feathers to make it look like a hen. I used hyacinth bulbs. This is my gift for Grandmother's Day. I got the idea from the Internet. I printed it with 100% infill and 0.2mm layer…
Interesting articles about 3d printing: https://www.matterhackers.com/topic/how-to?aff=7676
Interesting articles about 3d printing: https://www.matterhackers.com/topic/how-to?aff=7676
Interesting articles about 3d printing: https://www.matterhackers.com/topic/how-to?aff=7676
Interesting articles about 3d printing: https://www.matterhackers.com/topic/how-to?aff=7676
Interesting articles about 3d printing: https://www.matterhackers.com/topic/how-to?aff=7676
Interesting articles about 3d printing: https://www.matterhackers.com/topic/how-to?aff=7676
Interesting articles about 3d printing: https://www.matterhackers.com/topic/how-to?aff=7676
Lotus shaped flower with the core adapted to allocate tea candle. Eternal flower with an eternal flame. *please notice pictures are just recreations of the model.
Interesting articles about 3d printing: https://www.matterhackers.com/topic/how-to?aff=7676
Interesting articles about 3d printing: https://www.matterhackers.com/topic/how-to?aff=7676
Printable solid or vase mode. Recommend multiple walls either way. Scalable and classy. Tip-resistant. I seal these by using acrylic pouring medium for a quick coat inside then pour out and let dry. 100% leak free if done correctly.
These models are meant to be assembled with minimal supports. Print the flowers flat on the print bed, assemble them and insert into the vase/pot. I recommend 25% or greater model size for good tolerance. I used an Elegoo Neptune 3 pro…
Flowery pattern on a coaster! No MMU/AMS required, only a single colour swap which can be done manually! To clear any stringing (often inevitable on these 0.08 height prints, especially with wetter filament), just quickly go over the…
Another flower coaster! No MMU/AMS required, only a single colour swap which can be done manually! To clear any stringing (often inevitable on these 0.08 height prints, especially with wetter filament), just quickly go over the model with…
More beautiful flowers, now available for you tables! No MMU/AMS required, only a single colour swap which can be done manually! To clear any stringing (often inevitable on these 0.08 height prints, especially with wetter filament), just…
Mode vase flower with stem - Fleur Stem can be found at : https://www.printables.com/model/1000035-stem-for-vase-flower Vase can be found at : https://www.printables.com/model/1295609-vase-with-flat-base-2-variants-and-dervish-spiral
You can mix and match the small ones inside the big ones for more combinations and nice bitable cookies.
The model was printed using a 0.4mm nozzle and a layer height of 0.15mm. Colour changes were made at layer 5 - 0.8mm, layer 9 - 1.4mm, layer 13 - 2.0mm, and layer 17 - 2.6mm. Choice of colours is optional but the last two will probably be…
First of all, this is not my design. I was looking for something to place under my pot with a plant to take it closer to the sun, and discovered this: FLOWER POT STAND MÜNEVVER TEKİN | 3D CAD Model Library | GrabCAD As you can see, it is…
Elevate your desktop or workshop with this stylish and functional 3D printable can holder! Designed to hold your favourite beverage cans, this model offers two distinct printing options to match your mood and style. Print it as a clean,…
A sunburst or flower pattern fidget with either an open or closed petal design. Prints straight off but will need support on the build plate. The pictures would be better in yellow but I didn't have any :- (
This square flowerpot features a minimalist design, allowing for a modern look suited for various interior settings.
These flower magnet models I designed for a friend and was very happy with how they turned out! My designs were traced from a photo of flowers that my friend drew for another friends wedding. The flowers have holes on their rear side that…
I recommend applying a resin coating if you want to use the flowerpot as a water reservoir. When in contact with the soil, consider using eco-resin that is safe for your fragile plant.
Immerse yourself in the world of pixel art with these unique pixel-flowers and pixel cactus! Print your own pixel plants in the comfort of your own home, bringing the perfect blend of gaming and modern aesthetics into your home. You can…
Should print fine without supports, consider printing with a lower layer height for better quality. Version with and without drainage hole. If you enjoy my free 3D models, consider supporting my work to help me create even more…
I had to repot a large plant and designed this pretty big plant pot for that purpose. Since not everyone needs such a large pot, I also uploaded a smaller version that is 70% of the size. You can easily scale this to your desired size.…
The sun is shining, colorful flowers are blooming, and butterflies are dancing through the air – that’s what spring feels like! To bring this special feeling into home, onto terrace, or into garden, I’ve designed this decorative butterfly…
COMMERCIAL LICENSE // UNLOCK ALL FILES ====================== PRINT INSTRUCTIONS 6-12% infill 5 top layers 2-3 outer walls. No supports. Scale to desired size. ====================== MODERN MACHINE© STL files are strictly for personal…
Prints well @ .2mm, with two walls. 20% infill With these settings it leave a very nice ripple in the wall of the vase where the infill meets the inner wall.
Create your own custom sunflower t-shirts with this stencil! A beautiful and detailed sunflower pattern that will look great on any color fabric. Breakaway Bridges: The stencil includes small, strategically placed bridges to ensure that…
Simple to print, use tree supports (touching buildplate ONLY) for best quality. Ironing if wanted.
Elegant flower pot or vase decor for home Beautiful flower pot design or decorative feature for your home. If you have option to print them in more shiny colors you will see how design becomes more alive. If you like my work you can find…
Mit meiner Teiglüte kann das Schneidemesser von unten schmerzfrei gedreht werden und somit können eventuelle Teigreste aus der Maschine problemlos entfernt werden. Ein Must Have für alle Besitzer von Monsieur Cuisine Smart etc.Mit meiner…
Vase - or a flower pot - that can be printed in either direction. There's a hole in the middle for a cable+lamp or to allow the overflow of water. IMPORTANT: Has to be printed in “VASE” mode! Otherwise it'll be a solid block with a tiny…
For the spinner is required standard skate 608 bearing (inner di 8 mm, outer di 22 mm, width 7mm) and 5 M10 nuts. Spinner diameter 78 mm. Print Settings Printer: Print Rite DIY Rafts: No Supports: No Resolution: 0.1 - 0.25 Infill: 20-70%…
A simple vase with a curvy design. This model was NOT created with any use of AI. Designed to print without supports. If you intend to put water in the vase, paint inside and outside with a material like epoxy resin to make it waterproof.…
Flower keychain and earrings (three models) Flower for keychain with and without ring to be put on the keyring (you can also use hole which is part of the flower) Model for dual color printing (single extruder) - the back side is easier…
Put in a roll of toilet paper without the cardboard in the center. There are a couple of designs available, the lid snaps firmly into each of de designs. The flowers are embossed using a texture, this makes de file very heavy. I was…
The head is movable, you can chang the face, its based on the little buddy figurine.
"Flowers" Cookie Cutter set (8 models) Cookie cutter is made of 2 parts - cutter and inner stamp. Parameters: Flower1 Stamp - 56mm x 56mm x 4mm Cutter - 64mm x 64mm x 12mm Flower2 Stamp - 55mm x 55mm x 4mm Cutter - 63mm x 63mm x 12mm…
Mold used for hydro gels Theres two diffrent style molds one you just pore you solution in other has insert
Just the torchflower from minecraft! It's a flat model, but feel free to make it like the 4 way flower thingy.
6 pieces from frag plug flower and 1 from frag plug flower 1.1 pet g Enjoy!
A neat flower with a small hole for attaching it on a necklace. The flower was created with Inkscape as a SVG-file. I exported the layer as DXF-file, which is used in OpenScad for linear extrusion. Maybe you prefer working with the…
3D‑Printed Flowerpot with Saucer – Simple, Modern, and Functional This 3D‑printed flowerpot features a clean cylindrical design that fits seamlessly into both modern and traditional interiors. Its smooth walls and balanced proportions…
This flower-shaped jewelry organizer is beautiful and practical. It has several small compartments to store rings, earrings, necklaces, and other small items. The clean, minimal design looks great and is easy to 3D print. Powered by…
Print 0,4mm nozzle and 0,25mm or 0,3mm layer. PLA is good for inside flowerpot, for outside flowerpots is better PETG. . . . . . . . . Powered by MakerWorld-Make My Vase ( https://makerworld.com/makerlab/makeMyVase )
Firrst time CAD, first design, second print I have ever done. Did this mostly to learn stuff. The black one in the pictures is nice but rather wasteful, taking multiple times the filament of the published design, so it will remain…
Elevate your indoor garden with these stunning Voronoi geometric planters. The intricate, organic mesh design creates a beautiful play of light and shadow, making your succulents and small plants look like pieces of modern art. Watertight…
If you enjoy my designs and would like to support my work, or get a commercial license to sell prints of my models — you can join me on Patreon: 👉 https://www.patreon.com/cw/AR3DP Low-poly dragon with vibrant green tones, leaf-like wings,…
All my models are free. Due to banking restrictions in my country, I’m unable to sell models directly. If you’d like to support my work, you can do so on Patreon. https://www.patreon.com/15369015/join
Simple flowerpot i made that fits storebought herbs that come in a pot (ca. 80x68mm).
EN custom-sized flowerpot for Jogobella and Fruvita yogurt CUPS 400g. PL Doniczka dostosowana do kubka po jogurcie jogobella oraz fruvita 400g z biedronki.
El cuenco - macetero tiene las siguientes medidas 10 cm de diametro por una altura de 7,5 cm y las paredes tienen un espesor de 3 milimetros. Podemos variar las medidas a nuestro gusto una vez puesto en el laminador, es importante que al…
I just loose "Flower pot tray", from my big pot with tree orchidea. And after of some suffering time), remember what I have 3D printer!) I made this model so that it would be sturdy enough for a flower pot without requiring too much…
This is the application of Lissajous* figures utilising the interaction of two perpendicular sinusoidal waveforms to create 3D artistic forms for home decoration in the shape of a vase and flowers. The outer area of the vase is an open…
Homemade flowerpot diameter 20 cm. PLA print, Gyroid filler 15%, layers 3. Legs PLA print, Gyroin filler density 40%, layers 3. Insert the legs into the bottom holes and secure with PLA glue. I wish you a pleasant printing.
Because I love modeling and my girlfriend loves keychains I made this small flower shaped carabiner. It's perfect for keys or small objects. Printed with enough layers and quality PLA it can have a very strong hold. I printed it with a…
This 3D flower vase was designed as part of the Hack Club Construct challenge.
Add lovely ambiance and elegance to your LED tea lights with these stylish 3D-printed geometric flower covers. Choose from four unique designs. Perfect for valentines day, holidays, dinner parties, or cozy evenings. These toppers can be…
This 3D model does not include supports; however, they can be added in Bambu Studio. It was printed using PLA filament on a Bambu Lab P1S. The design was created in Tinkercad. I hope you find it useful
Print Instructions If you want to place water in this vase, make sure to read the prusa guide for water tight prints. I actually didn't try printing this in vase mode, but it would probably be very flimsy. Filament: PLA or PETG Print…
Cute Sunflower Powered by MakerWorld-Image-to-3D ( https://makerworld.com/makerlab/imageTo3d ) More of this kind of work here; https://www.printables.com/@StudioMechanik/collections/2866688
You need to print the first part. Then add a gap at a height of 115 mm and install the first part on the base. There's a special groove to prevent the ring from rotating. You will also need to buy glass flasks with a diameter of 15 mm and…
Make this Valentine's Day unforgettable with a symbol of union that stands the test of time. Our "You & Me" flower is not just a decoration—it’s a piece of digital art designed to celebrate your unique bond. 💬 If this project was helpful,…
Hello ! This is a vase optimised for a small orchid bought at Ikea. You can also use it for another plant or cactus 🌵 Dimensions : Inner diameter 6 cm Inner height 6 cm Print is really easy : no supports. Use material and height of your…
Metro X Scan of Bird Flower Thing that I found in my parents' bedroom.
3D Models of Funny Pots ready to print. Includes 7 separate stl files with 3 different models
This 3D model combines the fun and the creepy for halloween: a flowerpot/pencil holder with articulated arms holding eye
Cute Plant in a Pot Sunflower Powered by MakerWorld-Image-to-3D ( https://makerworld.com/makerlab/imageTo3d ) More of this kind of work here; https://www.printables.com/@StudioMechanik/collections/2866688
An oval-shaped frame made of flowers with many intricate details. It's a remix of a free-to-use CNC model found on thingiverse. I've made some adjustments to fix the mesh and optimize it for 3D printing, but I'm not sure if it's sturdy…
A round ornate plaque with a flower in the middle. It's a remix of a free-to-use CNC model found on thingiverse. I've made some adjustments to fix the mesh and optimize it for 3D printing, so now it should work fine (not printed yet).…
Versiering van een flessendrager met bloempotjes. Ik heb de potjes vernist aan de buiten kant met blinkende vernis. Aan de binnenkant heb ik zwarte lak ferv gebruikt tegen water lekkages. Decorating a bottle holder with flowerpots. I…
Maker Chip Blank Flower Inspired design with 8 petals. 3MF file with multiple parts for easy color change. Designed to print on a multi color printer with 0.25 nozzle but results may vary. Adjust material type and purging volumes…
