Flower Stamp Jig for Toilet Paper Rolls
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Flower-shaped jigs to keep toilet paper rolls in form to stamp with them on paper
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 159
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
After making the heart stamp jigs we had the idea of stamping spring motifs with our little ones in the same way. So we came up with a few designs to create a flower meadow. As with the hearts, the jigs are for standard toilet rolls (or kitchen paper rolls) with a diameter of 40mm.
Printed in 0,2mm PLA in Structural Preset.
I recommend cutting about 30-40mm off a roll, flattening it and then inserting it into the jig. If the corners won't go in, it's a good idea to cut them and make a notch. It is also important that the cardboard lies evenly and flatly on the paper. If there is too much of a gap, I recommend correcting this slightly with scissors.
Before stamping for the first time, the roll should also be allowed to lie in the paint for a while so that it can soak it up and swell a little.