1 / 3
Flower Stamp Jig for Toilet Paper Rolls — image 1
1 / 3

Flower Stamp Jig for Toilet Paper Rolls

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Flower-shaped jigs to keep toilet paper rolls in form to stamp with them on paper

Rating
0 / 5
Likes
11
Downloads
16
Makes
0
Views
159
Reviews
0

Updated at source:

Model information

Category
Other Ideas
License
Creative Commons — Attribution — Noncommercial — Share Alike

After making the heart stamp jigs we had the idea of stamping spring motifs with our little ones in the same way. So we came up with a few designs to create a flower meadow. As with the hearts, the jigs are for standard toilet rolls (or kitchen paper rolls) with a diameter of 40mm.

Printed in 0,2mm PLA in Structural Preset.

I recommend cutting about 30-40mm off a roll, flattening it and then inserting it into the jig. If the corners won't go in, it's a good idea to cut them and make a notch. It is also important that the cardboard lies evenly and flatly on the paper. If there is too much of a gap, I recommend correcting this slightly with scissors.

Before stamping for the first time, the roll should also be allowed to lie in the paint for a while so that it can soak it up and swell a little.

Tags