Mini Disc Shooter (Print in Place)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Quick and easy print to provide a lot of entertainment!
- Ocena
- 4,888 / 5
- Polubienia
- 2552
- Pobrania
- 15 851
- Wydruki
- 240
- Wyświetlenia
- 39 708
- Oceny
- 197
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
**Update 12/29 - Didn't realize the disc was missing. It was originally in the 3mf file, but the bambu ones don't open in Prusa Slicer so in the confusion of removing the non-compatible 3mf file the disc was left out. It's been added back in along with a 4 disc file and gcode to print the shooter and disc for the Mini, MK4 and Prusa XL.
----
Print in Place - Great Range - Don't Shoot at anything living (Duh)
Recommended Settings:
around .15mm layer height - 6 walls - 15% infill
*Could be printed faster at .20mm or .25mm
**I printed in PLA, but PETG may or may not be better
Either way would be a good print if you have some time while prepping another big one or want to finish out a roll of filament.