Mini Disc Shooter (Print in Place)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Quick and easy print to provide a lot of entertainment!
- Rating
- 4.888 / 5
- Likes
- 2,551
- Downloads
- 15,873
- Makes
- 241
- Views
- 39,752
- Reviews
- 197
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial
**Update 12/29 - Didn't realize the disc was missing. It was originally in the 3mf file, but the bambu ones don't open in Prusa Slicer so in the confusion of removing the non-compatible 3mf file the disc was left out. It's been added back in along with a 4 disc file and gcode to print the shooter and disc for the Mini, MK4 and Prusa XL.
----
Print in Place - Great Range - Don't Shoot at anything living (Duh)
Recommended Settings:
around .15mm layer height - 6 walls - 15% infill
*Could be printed faster at .20mm or .25mm
**I printed in PLA, but PETG may or may not be better
Either way would be a good print if you have some time while prepping another big one or want to finish out a roll of filament.