Liczymy pasujące modele…
microRACK was designed to solve a problem of building a homelab in limited space with maximum versatility. It's follows standard rack spacing with each module being 1U (approx. 44mm). The modules are fastened to the track using standard…
I designed these in onshape cad with parametric variables in mind these are 30mm wide by 45mm long for 6x3mm magnets but I also designed the untested 90mm length. I decided I like the look of 45mm segments better and the weight of cable…
After a lot of frustration with off the shelf cable organisers and other methods, mostly fixed with screws in cage nuts, I decided to make something that can just click in place. Then I realised that I might want to take it off again, so…
This adapter allows you to place the AeroPress directly on the opening of a HARIO Range Server 01 and extract the coffee directly into the carafe. I tested it successfully with the HARIO Range Server 01 (not with the bigger variants) and:…
UPDATE: added 2U and 3U panels, designed from scratch. (Not identical to 1U) Bottom layer is very thin, 0.6mm, to keep print times reasonable. 3 Versions: - Hex - Plain - Passthrough (Left and right part) Designed to join together with…
The fans work well with 5v usb ports and reduce CPU temperature from 98c to 60c but quite noisy. I print this with PETG and the 2 holes on the top turned out not good (without support). If you want to print without support, rotate 90…
Have built 10 inch rack and to clean up the wires made this plate. Optimized to be printed without any supports and whatever settings you wish. Here is video in case you want more context:
This is a faceplate / trunnion for a Motorola XTL1500 to hold it into a 10" rack. I based this on the 10" rack that many homelabbers are using for Ubiquiti gear. I thought a 10" rack would be perfect to hold two way mobile radios. The…
Ran out of rack nuts while building my MOD10 rack and didn't want to wait the 2 weeks to order off amazon to get more so designed my own rack studs. I add a arch ins the support between the studs to clear the support ribs on the MOD10…
The Open Node Project enables anyone to deploy enterprise-grade, decentralized physical infrastructure. Starting with the best open-source, 3D-printable 3U+ 10-inch server rack design: BOM for ON-1 Frame Part Units Notes ON-1 Frame 2 uses…
Some Top Panels to fully close the gaps in the Modular 10inch Server Rack when using the topper and Handles. The standard is always 3mm thickness. But if you are usind the Multiboard Add-On, then you will need the wider 6mm frontpanel and…
for those making a 24v power supply here is a mounting system that is easy to print. the front and cover are designed to print with no supports the back only needs supports for the stop points. Category: Electronics
This 3D-printed Server Rack Cable Management Velcro Mount offers a simple yet effective way to keep your network and AV cables organized. Designed to fit standard server rack configurations, this mount allows Velcro straps to pass through…
25.12.25 - Update: Added panel for UniFi Flex Mini Rack 10 24.12.25 - Update: Added Shelf for Mini Rack 18.12.25 - Update: Added panel for Mikrotik RB5009UG 2.11.25 - Update: Added new component models for the Mini Rack : Top, bottom, and…
Works with SK33502 Chenbro. If. If you need to use 3.5, simply cut the hashed lines (in red in the pictures) to unlock the 3.5 capability. Hopes this helps someone 👍. NAS/SAS/SATA/SSD/HHD/Storage Server. Edit 3/2026 V2 uploaded since v1…
As a software engineer, I run and maintain a bare-metal Kubernetes cluster on my mini PCs. I used to stack them on top of each other, and they would get extremely hot under heavy loads because there was almost no room for airflow. I’ve…
print at 0.2 layer height and 15% infill with 3 walls. use server rack screws and heat set inserts
I wanted to get into full sized server racks, but didnt really want to jump straight into buying all of the hardware to do so. The result was this! Its surprisingly rigid, and has held up quite well with the hardware I have installed. The…
A low-profile, modular mount for two 120mm fans (specifically designed for AC Infinity Multifan S3-P / S7-P) to create active airflow in a server cupboard or AV cabinet. Designed to fit on a standard 210x210mm build plate (like the Prusa…
This is a pair of IO shields for the IN-WIN IW-RF100S-S265 1U Short Depth Mini-ITX Rackmount Server Chassis. Both a blank one and a plate with cutouts for a N150 NAS/Router board "10G 2*i226-V 2.5G 3LAN NAS Motherboard" as seen on…
Like the original author this 10 inch server rack plate was designed for building Raspberry Pi4 NAS servers
This wheel replaces the original serving wheel from hoco's 2x2 Gridfinity Magnet Server. The new wheel has a more ergonomic edge that can also be moved with a magnet pen. It also holds 8 magnets instead of 2, cutting the 1/2 turn down to…
A collection of 10" rack mount front panels ranging from 1U-4U sizes. The panels are split into multiple parts so that they can fit on a standard Prusa 3D printer bed. There are solid and hex hole patterned panels of each size. They…
Какие-то части защелки для контроллра из сервера. Я просто постарался скопировать форму деталей чтобы заменить оригинальные, которые рассыпаются от времени
Created two files, one is pre-supported and the other isn't. They are both Resin Friendly and sized at 28mm.
Rack Mounted PI For a 10" Server rack This mount requires Glue to hold the PI sled to gather.
Modified Front - Added Cooling holes
This modular storage box is designed for sorting and storing screws and other small parts from PCs, servers, or similar hardware. The set consists of: 1 large box (170 × 170 × 45 mm) 2 small boxes (82 × 82 × 35 mm) that fit side by side…
These are voronoi blanks for 19in and 10in server racks. 19" versions have been split to fit on a smaller build plate. There's a dove-tail connection between parts "A" and parts "B". The "B" parts have a support object built-in to the…
Turn an Optlplex mini tower into a NAS or gaming pc with this conversion kit, faturin a new front panel with mounting points for a slim 120 mm fan, and a slim 80mm fan, HDD and SSD mounts, and a bracket fo mouning a flex PSU. Can print on…
I remixed the model to work with my larger switch, a Raspberry Pi mount with included two keystone jacks, and a blank panel.
Remix of an ESP32 case to allow for mounting on my rack, enabling control of the LED strip at the front using WLED. Unfortunately, it takes up more than 1U of space, but that's not an issue for me as I have extra space to the side of the…
This is my project for a portable modular 10" server rack. The size of the rack is determined by the length of the rails. The rack is designed with 4 rails instead of just 2 to make the backplane configurable for those who need extra…
Made a holder for my power brick/charger to power the Raspberry Pis in my 10 inch rack, takes up no room in the rear where I had plenty of extra space. There is now a 1U version in the files as well, if space matters for your front…
The Pi 3B/3B+ Desktop Server Case Turn your reliable Raspberry Pi 3B into a stylish piece of home decor. This case is designed as a minimalist design object for your shelf or desk, bringing premium aesthetics to your home server setup. A…
This is a completely modular blade system for storage and compute. Blades are as small as I could make them and still fit a 3.5" hard drive. The example cluster has 3 Raspberry Pi's and 6 drives, however you can print which ever modules…
i had some people not be able to find them so i have re-uploaded them here these are not my designs
I modified original model: Switched to Pi3 and other compatible with it Screen replaced with: GMT020-02-7P v1.3 Top 2 button holes were removed Added standoffs and legs For other non-modified parts you will have to download them from…
ASUS B85M-G R2.0 mATX 1U Rack Mount Tray — 10" Server Rack A custom open-frame 1U rack mount tray designed specifically for the ASUS B85M-G R2.0 micro-ATX motherboard, built to fit a 10" server rack (260×200mm interior). Prints as a…
Replacement server rack handles for Intel R2000 series servers. This was specifically tested to fit on my R2308WTTYSR.
I have an Unraid box that was getting really hot and needed a way to get another fan on the top panel. I will include the template and adapter itself. The template will help cut out a hole with a Dremel and drill to mount the shroud. I…
Requires a cut to size metal rod (e.g. from Obi). Handles allow easy access and switching. Blocks mounted on the side provide connection to rack - fixed with 1 cage nut each. Grips and rod can be easily removed and inserted back after…
This is a case to hold a HP server HSTNS-PD18 or HSTNS-PL18 power supply together with a custom PCB I designed to make the output available on Anderson Powerpole contacts. These are good power supplies for use with Amateur Radio as they…
Für eine ProfilRack bestehend aus 2020er Profilen passende teile. Man kann es aber auch für andere Dinge verwenden der Kreativität sind da keine grenzen gesetzt. Es soll dazu dienen den kleinen Server auch mal in eine ecke einbauen zu…
NOTE: This is a very raw design with a lot of issues, everything is a subject to change! This model requires minimal hardware to assemble. You should need only some screws for the motherboard and drive holder assembly (or not if you're…
A 1U Blank for covering an unused slot in a 10" mini server rack. Materials & Print Settings The model can be printed in any material as it won't handle any load. I've printed mine in PETG, but that was mainly because I printed everything…
A 1U mounting bracket for a Unifi Cloud Key gen2+ in a 10" mini server rack. The model includes a backing plate to hold the UCK, it's not needed unless you plan on moving around the server rack a lot. Materials & Print Settings The model…
Little Green Army Women : Forward Observer. Pairs Nicely with This model in Myclub
Modular 10" Server Rack! - Mod10 Top / Bottom Connector Holed for cable manegment https://www.printables.com/model/1225
Print settings Filament: PLA Layer height: 0.20mm Nozzle: 0.4mm Infill: 15%
Designed for the older generation but ubiquitous Supermicro Caddies. Part # SB16105 or MCP-220-00047-0B HDD Status LED's are functional with additional 2mm AND 1mm fiber-optic cable. I've used THIS by searching "fiber optic 2mm" and…
You need 4pcs M3x6 countersunk screw to fit the drive in the caddy. Tested servers: FUJITSU Server PRIMERGY TX120 S3 SFF FUJITSU Server PRIMERGY RX100 S8 rack server FUJITSU Server PRIMERGY RX1330 M1 rack server FUJITSU Server PRIMERGY…
This is a 3D printed cover for the OH6ZA PowerPole Breakout kit for HP server power supplies.
This setup is based on my current hardware and probably will not be applicable for your setup. The screws / t-nuts that i used are different type as well as these are the available parts that I have. So I uploaded the step file for you to…
Printed with Ender 3 V2: Faceplate/Strut/Bowtie/Pins: Overture Starry Blue PETG No Supports Brim 25% Gyroid Infill 4 Walls - Outside to Inside - Alternate extra wall 0.2 Layer Height Sled Parts: Overture Black PLA Pro No Supports No Bed…
Hi, I've done this holder for my "Home Server" to have a mini pc HP EliteDesk 800 G4, a power supply and a Seagate Expansion hard disk drive of 6Tb, to have everything on the same place and have a better airflow. Print settings: 0.20 of…
designed these to fit in the drive drawers for my HPe Blade center. not perfect but they work. they fit a wide variety of HP servers gen8-10. tried to make a version that was easy to remove, but kept the older model in case they really…
It will fit other Server PSUs but not all follow the same dimensions!!! Originally made for a DELTA Intel DPS-750XB A (specs found here page 40). Make sure your psu has following dimensions: 39mm x 73.5mm x 185mm Brackets might seem loose…
Allows you to mount the magnetic screen holder for the Neptune 3 and 4 to a rack like server rack. Printed with .12mm layer height, gyroid infill Support is recommended for the 90 degree angle, but should be printed flat for best mounting…
For my closed 19" Server / Network-rack I was looking for an top fan mount as an exhaust for my homelab gear. While there are of the shelf solutions available, I was interested to see if I could create a top fan mount-model for housing 4x…
Made these panels to cover the side openings on the server cabinets I'm using for my 3D printers. These take the place of the huge side panels that where on the server cabinet since I'm using the cabinet sideways. Scalable on Z axis for…
Summary This is a rack-mount cage system for the Protectli FW4B mini-PC (a popular OPNsense / pfSense router for home-labbers). It is designed to fit either a standard 19-inch server rack or 10-inch mini-rack and take up 1U of rack-space.…
Add a touch of personality to your Microserver with a customised nameplate. Add any text or graphic you like using Prusaslicer. In the past I've used sticky labels but they lose their stickiness after a year or two. This nameplate is…
Variables steckbares Wasserverteilersystem Für Schläuche mit einem Innendurchmesser von 7-8mm. Sie benötigen O-Ringe 7-10x1,5mm und 9-12x1,5mm. Der kleinere O-Ring muss in die 2mm Nut und dient nur der Einrastfunktion. Der größere O-Ring…
Here is my RPi server rack with USB-C Sitepanel and slide compartment . I created this one for easy and nice looking storaging your RPi. You can easily replace you Pi's by pulling out the compartment and just put your Pi on the pins.
I took the orig. FreeCAD files from https://www.printables.com/model/619620-magnetic-modular-led-strip-for-the-prusa-enclosure and modified it for a 12mm LED strip. Besides I also added a zip tie section at the end parts to fix the…
Simple CPU-shroud for the Microserver. You can simply plug it onto the radiator. You will need the following parts: 2 x Fan 40x40x10 (recommended: BlackSilentFan 40mm XM2) You can also use thicker fans 8 x M3x10mm Cylinder head bolts 8 x…
This 3D model of a home NAS desk is built-in-place with stackable levels, each designed to house StorjED HDD disks and the T8 Plus desktop. Each level is modular, featuring its own removable top for easy access and maintenance, allowing…
Ich hatte bei mir im RZ das Problem das die LWL Kabel rechts zur Kabelkanal gehen im Rack und die Stromkabel Links im Schrank geführt werden. Jetzt war das Problem das die Stromkabel immer lose im Rack hingen. Wir haben die dann immer mit…
Info Had a couple ASUS Chromebox 3 and wanted to use them as a home lab server but didn't have a good way to stack them. This model is what I came up with. Footprint is 164x164mm (outer, 154 inner) with 4mm thick bottoms Models included:…
Organize your desk with this unique, server-themed pen tidy! This 3D-printed design features fun, tech-inspired details like disk platters, mini server racks, and compartments for all your office essentials. With dedicated slots for pens,…
I wanted to reuse my old ITX motherboard and ATX power supply to create a small NAS with all my old HDDs. I only use it to power it up a few times per year to create a backup from my main server. Just to have some extra backup. It is not…
The files that mention “super” are +100mm and the files that mention “large” are +45mm. I'll be adding more to this project, once I put a router in it.
Welcome to Dave's INF~ Modular Cable Management System Unlock the potential of a pristine, organized environment with our modular cable management system. Perfect for seamlessly concealing wires in server racks, beneath desks, and within…
Blank for 1U slot on a server rack. I was able to print this on my Prusa XL if I stood it upright and placed it diagonally on the bed with a brim. Feel free to tinker:…
There are many 2.5" to 3.5" drive adapters for server trays / caddies, but this is mine. It is intended to use minimal plastic while still providing appropriate support, and is designed to use #6-32 x1/4" heat set inserts so as to accept…
Documentation & Assembly Guide - Please Read! I've moved much of the documentation here. Many of your questions are answered here (or will be answered) as I fill it out. READ DOCUMENTATION HERE Status updates April 22, 2025 Rendered STL's…
The part is bracketed below with the measurement of 41/4”. Replaces white rod only. It is slightly longer than the original, this allows it to be threaded farther up into the button assembly.
the front fan mount already has a grille so would defeat the purpose of the noctua high efficiency fan grille so i integrated the grille pattern to the front fan mount. Updated the legs for the four mounting screws for better printing…
This little housing takes an 8x8 led dot matrix module along with an ESP8266. Credit for wiring and coding goes to "bastelgarage.ch" - see link below. I removed the pin headers from both modules and directly soldered the connections, to…
microRACK was designed to solve a problem of building a homelab in limited space with maximum versatility. It's follows standard rack spacing with each module being 1U (approx. 44mm). The modules are fastened to the track using standard…
Howdy, I needed a way to exhaust the hot air from the servers at work into the ceiling space. I decided on using the removable panels that are on the server rack for cable passthrough as a mounting point for a duct. The little ‘nodules’…
I wanted somewhere to securely backup my ever-growing pile of photos and documents, so I designed this small file/media server around the Framework 13 motherboard/battery. They're used in a pair for dual redundancy. Its main features are:…
This is a case for HP server PSU. It is the single slot version. What you need: Marquard switch 5mm LED with clip 4mm banana poles XT60 connector There are different face plate versions attached. The XT60 location is chosen for soldering…
Have a lot of M5 bolts from Voron build and random prints over the years. Didn't want to buy more screws. Will add more if there is interest or if I get bored.
This is a case for HP server PSU. It is the twin slot version. What you need: Marquard switch 2x 5mm LED with clip 4x XT60 connector The XT60 location is chosen for soldering it to the PSUs PCB. Please check the web for further conversion…
I designed these in onshape cad with parametric variables in mind these are 30mm wide by 45mm long for 6x3mm magnets but I also designed the untested 90mm length. I decided I like the look of 45mm segments better and the weight of cable…
This is a mount for the mini server rack Philips Hue Bridge Printed in PETG, it is a snug fit as when I was designing it I forgot about the rubber feet, I think I was still able to slid it in from the front, if not because printing with…
Mini server rack - parts can be printed on a 220x220 build. I used Uhu glue to bond the main body (bottom and top together). 4.2mm x 45mm wood screws were used to attached the bottom part of a 17mm board. M4 screws were used for mounting,…
Works at least with the Huawei FusionServer 2288H V3, but probably other Huawei server models. Standard 3.5 inch bay (frontside) Standard 2.5 inch (SFF) bay (backside) 3.5 inch to 2.5 inch adapter caddy They are all toolless, design to…
Plate Train – The Perfect Companion for Shared Meals and Social Gatherings The Plate Train is a unique 3D-printed creation that combines functionality with fun. This original train runs on tracks that can be assembled to fit the size and…
Go look at the regular one if you have an A1 Mini download this one
Print settings: Nozzle: 0.4mm Material: PETG Layer height: 0.2mm Perimeters: 4 Top/bottom full layers: 7/6 Infill: 15% Supports/brim: NO STL is oriented to print
I'm using these fans: https://www.aliexpress.us/item/3256806843870946.html Configured as PWM fans in Klipper as bed fans. This is a little bracket intended to hold them in place. It's for a 350mm printer, but the model is sorta…
Super simple drawer/small shelf to use in a 10in network rack
These panels are designed for use in 19" server racks (EIA310 and similar). There are a few different types of panel depending on what you would like to mount or use: Unfinished Panels - Unfinished panels are blanks that have no chamfers…
Fully printed mini 10 inch server networking rack for a home lab. 5U height. Fits on a K1 Max in one piece. Clearances are 0.2mm for the top and back. 0.25in holes for hinges for a door option. Updated for 5.8mm mounting holes for use…
These 4U generic mining / server cases are available locally under many labels. In Europe, they are, for example, from Inter-Tech ( https://www.inter-tech.de/Mining_Case.html ). If you want to use 6 GPUs with PCIe X1 riser adapter, the…
Shelf for home server series Qotom Q203* in New design (for example Qotom Q20331G9). ! Check your stand carefully before printing - tray width 228mm! For wide stands! I just received a new Qotom Q20331G9 server for my home lab. The width…
