731 models
This is the Pi Camera Hat - A simple hat to add a Raspberry Pi Camera to your projects. The face has plenty of room for additional LEDs or accessories, and the base of the hat includes a sturdy mounting block with standard 1/4"-20…
Print approx. €1.88–€2.30 excl. taxPreliminary estimate for PETGSource material: PET
Documentation & Assembly Guide - Please Read! I've moved much of the documentation here. Many of your questions are answered here (or will be answered) as I fill it out. READ DOCUMENTATION HERE Status updates April 22, 2025 Rendered STL's…
Bring new life to second-hand mini PCs with this custom 3D-printed enclosure. This project turns an HP ProDesk 600 G4 Mini (and similar models) into a sleek retro-inspired console — perfect for emulation, streaming, or even as a…
Printed with Ender 3 V2: Faceplate/Strut/Bowtie/Pins: Overture Starry Blue PETG No Supports Brim 25% Gyroid Infill 4 Walls - Outside to Inside - Alternate extra wall 0.2 Layer Height Sled Parts: Overture Black PLA Pro No Supports No Bed…
Mini server rack - parts can be printed on a 220x220 build. I used Uhu glue to bond the main body (bottom and top together). 4.2mm x 45mm wood screws were used to attached the bottom part of a 17mm board. M4 screws were used for mounting,…
Just bought a few Fujitsu Servers, trying to develop a ssd tray for the 2,5" bays since mine somehow did not get shipped with them, and worst i could not find them online to insert any other ssd drive to them. with Version 5 everything…
Designed for the older generation but ubiquitous Supermicro Caddies. Part # SB16105 or MCP-220-00047-0B HDD Status LED's are functional with additional 2mm AND 1mm fiber-optic cable. I've used THIS by searching "fiber optic 2mm" and…
microRACK was designed to solve a problem of building a homelab in limited space with maximum versatility. It's follows standard rack spacing with each module being 1U (approx. 44mm). The modules are fastened to the track using standard…
About: The SD-Card Server Rack is designed to store multiple cards within easy reach. It holds a total of 6 cards. When removing the card you have a gripper, which facilitates the handling. In addition, the indicator arrow always helps…
I wanted somewhere to securely backup my ever-growing pile of photos and documents, so I designed this small file/media server around the Framework 13 motherboard/battery. They're used in a pair for dual redundancy. Its main features are:…
This is a minimalist and modular case to build a small fan-less server using a single board computer like a Raspberry Pi and up to 4 HDD or SSD of 2.5". I use this design since 2 years now, built around 3 Crucial MX500 SSDs and an Odroid…
Recently made a little 'rack' for my network switches and my raspberry pi. Includes some strain relief for the raspi power cable and some routing for the network cables to be a bit more neat. I run the 2.5G qnap switch on the bottom rack,…
As a software engineer, I run and maintain a bare-metal Kubernetes cluster on my mini PCs. I used to stack them on top of each other, and they would get extremely hot under heavy loads because there was almost no room for airflow. I’ve…
Raspberry Pi 4 Server Panel Within my server rack, I have three Raspberry Pi 4s, I decided the best thing I could do was to mount them in their own dedicated panel. Using a set of smaller panels to hold each Raspberry Pi. This thing is…
This 3D-printed Server Rack Cable Management Velcro Mount offers a simple yet effective way to keep your network and AV cables organized. Designed to fit standard server rack configurations, this mount allows Velcro straps to pass through…
A conversion to turn the Framework 12 laptop mainboard into a FrameVault home server such as a NAS or Home Assistant system. Whether you have a spare mainboard from a Framework laptop upgrade or you just want to build your own home server…
remixed from HP Elitedesk 800 g2/g1 SFF Server Face by magicGnome96
Have a lot of M5 bolts from Voron build and random prints over the years. Didn't want to buy more screws. Will add more if there is interest or if I get bored.
Simple CPU-shroud for the Microserver. You can simply plug it onto the radiator. You will need the following parts: 2 x Fan 40x40x10 (recommended: BlackSilentFan 40mm XM2) You can also use thicker fans 8 x M3x10mm Cylinder head bolts 8 x…
Blank for 1U slot on a server rack. I was able to print this on my Prusa XL if I stood it upright and placed it diagonally on the bed with a brim. Feel free to tinker:…
These panels are designed for use in 19" server racks (EIA310 and similar). There are a few different types of panel depending on what you would like to mount or use: Unfinished Panels - Unfinished panels are blanks that have no chamfers…
Originally designed for a Startech.com 6U wall mount server rack. But should work with their entire line of wall mount server rack products. It's a two piece design. You can installed the CAT 6 terminated or unterminated it doesn't…
I own a Homeassistant Server who runs on an SSD. No Solution on the Internet was good enought so i designed my own case. And wola here it is... For cooling i use an ice tower and an aditional 60mm fan on the back of the case. The SSD fits…
Bottom Connector SMLIGHT SLZB-06 for Modular 10" Server Rack! - Mod10
It will fit other Server PSUs but not all follow the same dimensions!!! Originally made for a DELTA Intel DPS-750XB A (specs found here page 40). Make sure your psu has following dimensions: 39mm x 73.5mm x 185mm Brackets might seem loose…
Super simple drawer/small shelf to use in a 10in network rack
This is an evolution of my previous mod . I created a mount for a ZimaBoard with a dual-port NIC and two SSDs attached to install a firewall with PFsense or OPNsense. Because the network ports of the MikroTik HAP are on the back, it was…
In this remix I have added some more logos for the Hexagonal logo-tiles project made by the user zeus. Please see the original project page for more information . Logos added: Gentoo Postgresql Zig Minecraft Matrix XMPP Haskell How to…
About Server Rack Cage Nuts & Screws Replacement This is Server Rack Cage Nuts & Screws Replacement tested with Modular 10" Server Rack! - Mod10 by MandicReally. Might work with other server rack projects (or industrally fabricated racks.…
My Nas is a Qnap Ts-464U, but other will fit as well i guess. .STEP file is included so you can customize it. ABS/ASA/PLA/PETG 15-50% No Brim No Supports
This is a modular SBC or Development Board enclosure. Its base design principle is you stack on top of each other plates that hold various devices such as Raspberry PI, Arduinos, ESP32, hard drives, etc. You can customize it the way you…
This is a modular Single Board Computers enclosure for up to 4 devices. The device cards are held vertically. This design let you service one card without having to remove the cards on top of it like in the previous design…
Simplest print 2minute design on Tinkercad this and another quick design available on Tinkercad as BowStringServer Simple bow string server for making repairing bowstrings for compound, recurve, crossbows. Simple design to print add 85mm…
Print settings Filament: PLA Layer height: 0.20mm Nozzle: 0.4mm Infill: 15%
Allows you to mount the magnetic screen holder for the Neptune 3 and 4 to a rack like server rack. Printed with .12mm layer height, gyroid infill Support is recommended for the 90 degree angle, but should be printed flat for best mounting…
I was using a Windows laptop for running OctoPrint but it was taking up so much space that I decided to install OctoPrint on an Intel Compute Stick. All the benefits of my Windows 10 laptop in a very tiny package. I wanted to mount it out…
Modular 10" Server Rack! - Mod10 Top / Bottom Connector Holed for cable manegment https://www.printables.com/model/1225
Variables steckbares Wasserverteilersystem Für Schläuche mit einem Innendurchmesser von 7-8mm. Sie benötigen O-Ringe 7-10x1,5mm und 9-12x1,5mm. Der kleinere O-Ring muss in die 2mm Nut und dient nur der Einrastfunktion. Der größere O-Ring…
Seal Exploded ViewServer Rack LED Strip Controller Veroboard Case My Server Rack along with my Printer and CNC Enclosure was in need of some lights. So I decided to buy some LED Strips and install them, however, I wanted a better control…
for those making a 24v power supply here is a mounting system that is easy to print. the front and cover are designed to print with no supports the back only needs supports for the stop points. Category: Electronics
These are voronoi blanks for 19in and 10in server racks. 19" versions have been split to fit on a smaller build plate. There's a dove-tail connection between parts "A" and parts "B". The "B" parts have a support object built-in to the…
note that you will need 4 m3-10 bolts to mount the router tonote that you will need 4 m3-10 bolts to mount the router to the holder
Heyho, hier ist ein 3D Modell, bisher ungetestet für 19" Serverracks. Du musst die Verstärkungen 9x Drucken. außerdem brauchst du ne menge an Gewindeeinsätzen. Am besten nutzt du diese hier:…
So I am getting my battery and solar setup done and I was not going to be bothered with buying shelves for the stack ( 2 ) of batteries so I decided to make some spacers to hold the back up as the front will be held into place by proper…
Какие-то части защелки для контроллра из сервера. Я просто постарался скопировать форму деталей чтобы заменить оригинальные, которые рассыпаются от времени
Mit diesen STL Dateien kann man ein eigenes kleines Raspberry Pi Serverrack drucken. Was benötigt wird: 1. 3D-Drucker 2. Schrauben 3. Gewindeeinsätze 4. Lötkoblen Wichtig. Es sind nicht alle Gewindeeinsätze-Stellen im fertigen Modell…
Replacement server rack handles for Intel R2000 series servers. This was specifically tested to fit on my R2308WTTYSR.
Recommended settings: 6 wall loops 6 base/top layers 40% infill gyroid No support No brim/skirt Tray with base on build plate and front panel with front on build plate
Oh boy here we go I did this one as a commission for a very weird order. Fits some random 4U Haswell server with 8 drive bays. Still unfinished, and I had no opportunity to make it better. Still made it work. Decided to publish it only…
microRACK was designed to solve a problem of building a homelab in limited space with maximum versatility. It's follows standard rack spacing with each module being 1U (approx. 44mm). The modules are fastened to the track using standard…
I designed these in onshape cad with parametric variables in mind these are 30mm wide by 45mm long for 6x3mm magnets but I also designed the untested 90mm length. I decided I like the look of 45mm segments better and the weight of cable…
After a lot of frustration with off the shelf cable organisers and other methods, mostly fixed with screws in cage nuts, I decided to make something that can just click in place. Then I realised that I might want to take it off again, so…
This adapter allows you to place the AeroPress directly on the opening of a HARIO Range Server 01 and extract the coffee directly into the carafe. I tested it successfully with the HARIO Range Server 01 (not with the bigger variants) and:…
UPDATE: added 2U and 3U panels, designed from scratch. (Not identical to 1U) Bottom layer is very thin, 0.6mm, to keep print times reasonable. 3 Versions: - Hex - Plain - Passthrough (Left and right part) Designed to join together with…
The fans work well with 5v usb ports and reduce CPU temperature from 98c to 60c but quite noisy. I print this with PETG and the 2 holes on the top turned out not good (without support). If you want to print without support, rotate 90…
Have built 10 inch rack and to clean up the wires made this plate. Optimized to be printed without any supports and whatever settings you wish. Here is video in case you want more context:
This is a faceplate / trunnion for a Motorola XTL1500 to hold it into a 10" rack. I based this on the 10" rack that many homelabbers are using for Ubiquiti gear. I thought a 10" rack would be perfect to hold two way mobile radios. The…
Ran out of rack nuts while building my MOD10 rack and didn't want to wait the 2 weeks to order off amazon to get more so designed my own rack studs. I add a arch ins the support between the studs to clear the support ribs on the MOD10…
The Open Node Project enables anyone to deploy enterprise-grade, decentralized physical infrastructure. Starting with the best open-source, 3D-printable 3U+ 10-inch server rack design: BOM for ON-1 Frame Part Units Notes ON-1 Frame 2 uses…
Some Top Panels to fully close the gaps in the Modular 10inch Server Rack when using the topper and Handles. The standard is always 3mm thickness. But if you are usind the Multiboard Add-On, then you will need the wider 6mm frontpanel and…
for those making a 24v power supply here is a mounting system that is easy to print. the front and cover are designed to print with no supports the back only needs supports for the stop points. Category: Electronics
This 3D-printed Server Rack Cable Management Velcro Mount offers a simple yet effective way to keep your network and AV cables organized. Designed to fit standard server rack configurations, this mount allows Velcro straps to pass through…
25.12.25 - Update: Added panel for UniFi Flex Mini Rack 10 24.12.25 - Update: Added Shelf for Mini Rack 18.12.25 - Update: Added panel for Mikrotik RB5009UG 2.11.25 - Update: Added new component models for the Mini Rack : Top, bottom, and…
Works with SK33502 Chenbro. If. If you need to use 3.5, simply cut the hashed lines (in red in the pictures) to unlock the 3.5 capability. Hopes this helps someone 👍. NAS/SAS/SATA/SSD/HHD/Storage Server. Edit 3/2026 V2 uploaded since v1…
As a software engineer, I run and maintain a bare-metal Kubernetes cluster on my mini PCs. I used to stack them on top of each other, and they would get extremely hot under heavy loads because there was almost no room for airflow. I’ve…
print at 0.2 layer height and 15% infill with 3 walls. use server rack screws and heat set inserts
I wanted to get into full sized server racks, but didnt really want to jump straight into buying all of the hardware to do so. The result was this! Its surprisingly rigid, and has held up quite well with the hardware I have installed. The…
A low-profile, modular mount for two 120mm fans (specifically designed for AC Infinity Multifan S3-P / S7-P) to create active airflow in a server cupboard or AV cabinet. Designed to fit on a standard 210x210mm build plate (like the Prusa…
This is a pair of IO shields for the IN-WIN IW-RF100S-S265 1U Short Depth Mini-ITX Rackmount Server Chassis. Both a blank one and a plate with cutouts for a N150 NAS/Router board "10G 2*i226-V 2.5G 3LAN NAS Motherboard" as seen on…
Like the original author this 10 inch server rack plate was designed for building Raspberry Pi4 NAS servers
This wheel replaces the original serving wheel from hoco's 2x2 Gridfinity Magnet Server. The new wheel has a more ergonomic edge that can also be moved with a magnet pen. It also holds 8 magnets instead of 2, cutting the 1/2 turn down to…
A collection of 10" rack mount front panels ranging from 1U-4U sizes. The panels are split into multiple parts so that they can fit on a standard Prusa 3D printer bed. There are solid and hex hole patterned panels of each size. They…
Какие-то части защелки для контроллра из сервера. Я просто постарался скопировать форму деталей чтобы заменить оригинальные, которые рассыпаются от времени
Created two files, one is pre-supported and the other isn't. They are both Resin Friendly and sized at 28mm.
Rack Mounted PI For a 10" Server rack This mount requires Glue to hold the PI sled to gather.
Modified Front - Added Cooling holes
This modular storage box is designed for sorting and storing screws and other small parts from PCs, servers, or similar hardware. The set consists of: 1 large box (170 × 170 × 45 mm) 2 small boxes (82 × 82 × 35 mm) that fit side by side…
These are voronoi blanks for 19in and 10in server racks. 19" versions have been split to fit on a smaller build plate. There's a dove-tail connection between parts "A" and parts "B". The "B" parts have a support object built-in to the…
Turn an Optlplex mini tower into a NAS or gaming pc with this conversion kit, faturin a new front panel with mounting points for a slim 120 mm fan, and a slim 80mm fan, HDD and SSD mounts, and a bracket fo mouning a flex PSU. Can print on…
I remixed the model to work with my larger switch, a Raspberry Pi mount with included two keystone jacks, and a blank panel.
Remix of an ESP32 case to allow for mounting on my rack, enabling control of the LED strip at the front using WLED. Unfortunately, it takes up more than 1U of space, but that's not an issue for me as I have extra space to the side of the…
This is my project for a portable modular 10" server rack. The size of the rack is determined by the length of the rails. The rack is designed with 4 rails instead of just 2 to make the backplane configurable for those who need extra…
Made a holder for my power brick/charger to power the Raspberry Pis in my 10 inch rack, takes up no room in the rear where I had plenty of extra space. There is now a 1U version in the files as well, if space matters for your front…
The Pi 3B/3B+ Desktop Server Case Turn your reliable Raspberry Pi 3B into a stylish piece of home decor. This case is designed as a minimalist design object for your shelf or desk, bringing premium aesthetics to your home server setup. A…
This is a completely modular blade system for storage and compute. Blades are as small as I could make them and still fit a 3.5" hard drive. The example cluster has 3 Raspberry Pi's and 6 drives, however you can print which ever modules…
i had some people not be able to find them so i have re-uploaded them here these are not my designs
I modified original model: Switched to Pi3 and other compatible with it Screen replaced with: GMT020-02-7P v1.3 Top 2 button holes were removed Added standoffs and legs For other non-modified parts you will have to download them from…
ASUS B85M-G R2.0 mATX 1U Rack Mount Tray — 10" Server Rack A custom open-frame 1U rack mount tray designed specifically for the ASUS B85M-G R2.0 micro-ATX motherboard, built to fit a 10" server rack (260×200mm interior). Prints as a…
Replacement server rack handles for Intel R2000 series servers. This was specifically tested to fit on my R2308WTTYSR.
I have an Unraid box that was getting really hot and needed a way to get another fan on the top panel. I will include the template and adapter itself. The template will help cut out a hole with a Dremel and drill to mount the shroud. I…
Requires a cut to size metal rod (e.g. from Obi). Handles allow easy access and switching. Blocks mounted on the side provide connection to rack - fixed with 1 cage nut each. Grips and rod can be easily removed and inserted back after…
This is a case to hold a HP server HSTNS-PD18 or HSTNS-PL18 power supply together with a custom PCB I designed to make the output available on Anderson Powerpole contacts. These are good power supplies for use with Amateur Radio as they…
Für eine ProfilRack bestehend aus 2020er Profilen passende teile. Man kann es aber auch für andere Dinge verwenden der Kreativität sind da keine grenzen gesetzt. Es soll dazu dienen den kleinen Server auch mal in eine ecke einbauen zu…
NOTE: This is a very raw design with a lot of issues, everything is a subject to change! This model requires minimal hardware to assemble. You should need only some screws for the motherboard and drive holder assembly (or not if you're…
A 1U Blank for covering an unused slot in a 10" mini server rack. Materials & Print Settings The model can be printed in any material as it won't handle any load. I've printed mine in PETG, but that was mainly because I printed everything…
A 1U mounting bracket for a Unifi Cloud Key gen2+ in a 10" mini server rack. The model includes a backing plate to hold the UCK, it's not needed unless you plan on moving around the server rack a lot. Materials & Print Settings The model…
Little Green Army Women : Forward Observer. Pairs Nicely with This model in Myclub
Modular 10" Server Rack! - Mod10 Top / Bottom Connector Holed for cable manegment https://www.printables.com/model/1225
Print settings Filament: PLA Layer height: 0.20mm Nozzle: 0.4mm Infill: 15%
Designed for the older generation but ubiquitous Supermicro Caddies. Part # SB16105 or MCP-220-00047-0B HDD Status LED's are functional with additional 2mm AND 1mm fiber-optic cable. I've used THIS by searching "fiber optic 2mm" and…
