Raspberry Pi Camera Case - OctoPrint - Security Server
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.88 – €2.30 net (excluding VAT)
For file: pi-hat-camera_02mm_petg_mk3s_2h22m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.09 excluding VAT (range midpoint).
- Weight reported by the author
- 22 g
- Print time reported by the author
- 2.36 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This is the Pi Camera Hat - A simple hat to add a Raspberry Pi Camera to your projects.
- Rating
- 5 / 5
- Likes
- 25
- Downloads
- 171
- Makes
- 1
- Views
- 2,981
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is the Pi Camera Hat - A simple hat to add a Raspberry Pi Camera to your projects. The face has plenty of room for additional LEDs or accessories, and the base of the hat includes a sturdy mounting block with standard 1/4"-20 threads.
While I am sure this hat has many uses, it was initially intended to use with OctoPrint for my office. I don't always use OctoPrint, and love the ability of moving the camera around for the best angles on various prints.
It could also easily serve as a main server + video feed for home security and automation projects, or as the basis for an actual Pi Camera project.
This requires the open case top and either the solid or vented base from my full collection here: https://www.prusaprinters.org/prints/23922
My OctoPrint Installer: https://github.com/itcarsales/prusaPi
Print instructions
PETG or PLA
.2mm Layer Height
20% Infill - Grid
Photos feature Galaxy Black PETG and Carmine Red PETG