Counting matching models…
I was got tired of guessing in error a few times which cost me a bunch more time. Printed with a filament change at 1mm Reading degrees; 3 lines closest to hole are 45 deg sequencing 0, 45 & 90 8 Hollow lines are in 10 deg increments,…
Simple Automatic Nozzle Cleaner If you have some out-of-print area on your print-bed then a very simple automatic Nozzle Cleaner solution is presented here for you. An out-of-print area, is an area, which normally will not be visited by…
Printed with Prusament PETG Orange 0.3mm for the bottom, 0.2mm for the top no rafts or supports required. Alieexpress ring:…
GIRO.remix - OctoPrint Raspberry Pi Camera Mount General This is a remix of parkis' nicely designed Raspberry Pi Camera Mount for the Prusa i3. I nearly completely redesigned it to make it fit on my 3D printer with a different camera. The…
You need 8x M2x4 4x M2x4 Heat Thread Insert 4x 2x8 Magnets
Remix of John_Sinclair case on Thingiverse. Added : - Raspberry Pi Logo vent holes. - Octoprint wording - Slot for Raspberry Pi camera ribbon cable. Printed in PLA - 2 colour to match Ender 3 colour scheme.
I needed an easy way to do simple tasks at my Octoprint controlled printers. This case houses a Pi 4 with 6 Cherry MX switches and their key caps, along with a 8 neo pixel bar for status lights. These all hook up to the gpio and can be…
I was using a Windows laptop for running OctoPrint but it was taking up so much space that I decided to install OctoPrint on an Intel Compute Stick. All the benefits of my Windows 10 laptop in a very tiny package. I wanted to mount it out…
These button labels are designed to be printed separatly from the main button box. Simply glue them in place and use a permanent marker to highlight each symbol. Feel free to ask me about any question you have. Leave a comment and I will…
Version 2 now available: https://www.printables.com/model/1219990-ender3v3se-screen-and-octopi-mount I have left this up so that the basic screen or printer mounts can be used still.…
this is a box for orange pi 3b to install on 3030 extrusion. this is curently installed on my caribou mk3s. and for a 5 inch touchscreen to install octodash
I needed a place for the Pi that hosts Octoprint. Adding a touch display makes lots of things possible that would otherwise require booting up a computer. The whole assembly is intended to be mounted on the outside of a printer enclosure.…
Covers the Raspberry Pi Zero 2 W GPIO to leave free only required pin headers. I use it for OctoPrint on Raspberry.
This is a simple, clean mounting bracket designed to hold a Raspberry Pi (in its case) securely near your 3D printer. I created this to tidy up my OctoPrint setup and keep everything mounted in one place instead of having the Pi sitting…
Note: This case is designed for the Raspi 3b+ if you need a case for the 4b it is linked here . This case is designed arround the Raspberry Pi 3b+ and provides for mounting a 30x30x7 mm 5V fan. Features * Case cover with OctoPrint Logo…
Soporte para pantalla oled y esp8266 01 para printer monitor. Printer monitor es un programa que te enseña la información en tiempo real sobre la impresión en una pantalla oled. Cuando la impresora no está imprimiendo, puede apagarse la…
Based on the original space allocation for the Ender 3 V2 tool tray , I decided to design a housing for my Raspberry PI Zero 2 W with a 40mm 5 V fan . I still included a tool tray for those Allen keys and/or nozzles. The cables feed…
This year's cookie cutter is a tribute to Gina Häußge and octoprint. Thank you Gina.
The malolo Pi case was perfect for my needs but I wanted to include the Octoprint logo. The print is optimised for use with the MMU2 by using 5 different colours to create the logo. This has also been adapted to include fixation for the…
I needed a place for the Pi that hosts Octoprint. Adding a touch display makes lots of things possible that would otherwise require booting up a computer. The whole assembly is intended to be mounted on the outside of a printer enclosure.…
This is a simple case for a RPI4 that makes it super easy to add & remove from the side of the printer. It is a remix of https://www.printables.com/model/72224-raspberry-pi-4-case-with-extrusion-rails
Remix per inserire dissipatori standard e ventolina noctrua a distanza minima. sono stati creati dei fori per ulteriore raffreddamento del PI. https://www.thingiverse.com/thing:3852672 la ventola noctua è un 40x40x20 acquistata su amazon…
An enclosure for a Raspberry Pi 3 or 4 (there are different models for both) running Octoprint . There is a slot for an 8 Neopixel strip and a 16mm button . I used the Adafruit Neopixel stick in particular since I found that the ones I…
The Display is powered by USB-C (5V). The Adafruit MCU Board MatrixPortal S3 connects via its built in WiFi card to the Octoprint Instance and displays the current hotend and bed temperature as well as the print job progress and remaining…
Octoprint monitor weather station esp8266 D1 mini bme280 case What a mouthful. It shows the diversity for which this can be used for. Usecases: Octoprint monitor Weather station InfluxDB querry NTP clock Desktop widget Whats needed: Wemos…
This build is dangerous! Build it only if you really know what you're doing! I won't be held responsible if this causes you any injury or worse! This is a customized Prusa MK2/MK2.5 PSU cover to fit a DC-DC converter and provide 5v power…
I realized there is no way I will ever slice a file that gives me a gCode file of 500mb or more to get the achievement, so I modified the biggest one I had in my print gCode folder. It was a kraken lithophane lampshade which was about…
NOTES The mount is made to be used with the Ender 3 Max ( 2021 ) but should work with any Ender 3 printers with the 4040 profile rails. The case is made for use with the Raspberry Pi 3 Model B and FREENOVE 5 Inch Touchscreen ( FNK0078A) .…
I mixed the mount arm I liked with the case I liked for the Prusa MK3S and Raspberry Pi 4 to use with OctoPrint. I created a basic mesh case, one with a ribbon cable slot, a case for a 30mm fan, and a 30mm fan with ribbon cable slot. With…
This is my simple mount for a Raspberry PI Zero W 2 and the rev 1.3 camera or one of the bigger on a 39x39mm pcb. It uses M3x15mm to join the links together M2.5 x5mm to secure the pi and m2x5mm for the camera module. To mount to my Vyper…
I wanted to have a way of quickly seeing the progress of my current print, without visiting my printer, an app or the webpage of octoprint. Also I needed a use for the LED-Ring I bought a few months ago. What you will need: NeoPixel…
I have been a long time user of Octoprint and wanted to have a sleek, “factory intended" design for mounting a raspberry pi on my Prusa XL. Observing current open source designs out there, they usually mount on the side of the rails which…
This is a remix of the feral engineer's btt-pi enclosure for the artillery sidewinder x3 with a raspberry pi and webcam
Printed with Prusament PETG Orange 0.3mm for the bottom, 0.2mm for the top. Supports are required for the frame hook part. Alieexpress ring:…
Easy to print with PLA ( Tinmorry Galaxy Black, in my case) Part list: 50mm Neopixel ring double sided adhesive tape a single M4 bolt and nut a printed t-nut for operation you'll need a raspberry with octoprint Plugin: WS281x LED Status…
customized Creality Ender 3 Pro , upgraded both aesthetically and functionally to enhance performance, connectivity, and style. The goal was to create a printer that not only looks unique but also offers greater autonomy and remote…
Update: Febuary 10th 2022, added a setting and stl to print the original case without the Raspberry Pi cut-out. Because of power issues when using power from the MK3 board, I have changed to an external case hooked to the frame just below…
intégration octoprint pour raspberry dans le tiroir de la ender 3S1
teachingtech flexible octoprint webcam mount for 3030 extrusion
Enclosure for Prusa Mini Base ( https://www.printables.com/model/63483-prusa-mini-base ) for the spool holder. You can use it for Raspberry with Octoprint (left) and PolyDye (right). For this you need Prusa Mini+…
An adjustable side mount for the Samsung Galaxy A50 so you can run Octo4A and make great timelapses with Octolapse. If your phone is in the same dimensional ballpark as the A50, it will probably fit as well. If it doesn't, I've included…
Raspberry pi Zero (W) case with camera. Holes for 2 x usb, hdmi and SD card. I also added another bottom cover (V3) with additional parts which can be mounted on a P3STEEL prusa printer. You can use a combination of the parts you like. I…
Y-Rail Adapter modified for usage with Hyperpixel 4" Touchscreen LCD with Raspberry Pi4 for Octoprint and OctoDash for Prusa i3 MK3S+ https://www.prusaprinters.org/cs/prints/70062-hyperpixel-4-touchscreen-lcd-raspberry-pi4-without
Enclosure for Raspberry Pi 4B that fits under an Ender 3 bed carriage. It has cutouts for all the Raspberry Pi4 ports , a 12x12mm push button to wake up the Pi and a rocker switch for the LEDs. On the back, it has holes for a DC port and…
The stick on LED strips many folks use have two problems this tries to address: They have glare due to the LEDs facing the user - so this mount angles them in slightly to face the printer. The adhesive gets weak with heat and falls down -…
Update as of Feb 22 2020: I have added the cover (lid.stl) to the files. I had simply forgotten to include it. Sorry!! I found the great remix from @wabbitguy to use NodeMCU Amica for the Octoprint monitor. I had all kind of displays…
Prusa Automatic Nozzle Cleaner This solution is for the Prusa MK-series printers, that don't really have an out-of-print area, most solutions will either collide during bed-leveling or can't coop with the PINDA-sensor. If your printer…
Remixed the original design to fit a raspberry pi 4 and 2 buck converters! Also removed the logo on the cover too. This is designed for a 30mm fan. I got this cheap one from eBay: https://ebay.us/iBLdfj Video of this thing in action:…
These are frame clips to attach a W5 Pro Mini PC to the side of a 3D printer. I've included clips for the Anycubic i3 Mega and the Monoprice Maker Select. The clip is designed in a way that the Mini PC can be removed from it easily enough…
This is a holder (slide in) for a custom touch screen for ender 3 v2, you can say goodbye to your old screen! It's a simple model, i couldn't find any other model so i made one, it really needs some work there arent any screw slots etc
I designed a webcam mount for my Ender 3 V2. You can probably mount most webcams using the screw I designed. It works with my Logitech C920, but I can’t guarantee that it will work with other webcams as well. The print will work with PLA…
Base for Adafruit's OctoPrint Raspberry Pi Rig Stand. Link to OctoPrint Raspberry Pi Rig 3.5" PiTFT Touch Display https://www.prusaprinters.org/prints/7167 Print instructions Print with your choice of suitable medium ABS or PLA.
I made this Raspberry Pi 4 OctoPrint case mount for Prusa i3 MK3/s frame. The bracket is merged to the meshed bottom of the case and fits exactly on the m3 threaded holes in the prusa frame. You can find suitable housing tops from me Haz1…
I created this $10 IP Camera which allows you to use it for Octoprint (Or just a security camera) instead of a wired USB camera. USB has a limit of the number of web cams it can support with the bandwidth of the USB Bus. This IP Camera…
Simple but functional stand for positioning Pi camera and holding the Raspberry Pi too. YOU WILL NEED: 1/4 inch rod, metal or wood should do 1/4 inch drill bit (unless your printer can print perfect holes) one #6 wood screw The base is…
Covers the Raspberry Pi Zero 2 W GPIO to leave free only required pin headers. I use it for OctoPrint on Raspberry.
Octoprint Case for Creality CR-6 se (may work on other printers with T-Slot frame) with optional power button, tested with raspberry Pi 3 ps. don't forget to disable the +5V from USB plug if connecting to CR-6 Print Settings Printer…
Octoprint case for Monoprice Mini with optional power switch, works with Raspberry Pi 2 Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 200 Infill: 38 Filament: PolyMaker PETG Category: 3D…
Octoprint-System basierend auf Raspberry Pi Zero mit integriertem LCD für Temperatur, Luftfeuchtigkeit, Prozessorauslastung etc., Fernein-/abschaltung des 3D-Druckers über Octoprint Interface. mehr unter…
This is a simple, clean mounting bracket designed to hold a Raspberry Pi (in its case) securely near your 3D printer. I created this to tidy up my OctoPrint setup and keep everything mounted in one place instead of having the Pi sitting…
Long time ago, Amazon was a treasure trove for those of us who provided HONEST reviews in exchange for products. Amazon put a stop to that, but back then, one of the items I scored was an endoscope camera. I used it a few of times so I…
Great for an OctoPrint setup! You will have to use a very small amount of hot glue on the corners for the frame portion of this print, to attach it to the housing of your display. The cover portion fits nicely within the frame and can be…
Just modified the main stand so it would grip the pi case because mine kept falling off. Also made simple adapter for the pi camera so everything would be together Enjoy! Category: Electronics
Just a quick remix without the engravement for the nyloc mod by Jakuza.
This is a remix of the Raspberry Pi Case by kingstonrichard ( https://www.thingiverse.com/thing:4713922 ) I likes a lot the idea of having a separate bracket to hold the case. But recently I started needing access to the GPIO pins on my…
Vor- und Nachteile auf einen Blick: + modularer Aufbau zum einfachen Austausch und Entnahme der Silikonergebnisse + Druck kann durch Spritze aufgebaut werden um Lufteinschlüsse/Hohlräume zu vermeiden - würde es nicht an den Seiten bei…
This design it was done, to upgrade the A10, A10M, (Ender 3; not verified since I don’t have one at home, so if someone can verify if the design fits and inform me) and now also fitted it to my CR-10sPro and basically every printer when…
This box contains a Raspberry Pi running the fabulous OctoPrint / OctoPi, a 5 V power supply and an SSR. It allows you to remotely turn on and off your attached 3D printer, either by using the web interface, by sending G-Code or with a…
The first in a series of models for makers to earn achievements for their dedication to 3D printing. Model prints with no supports and with 10% infill. Optional panels are included if you want to print brown/wood covers for the model…
I was jealous that other 3D printer users had their own filament sensor accessories, and I thought it was about time for a Monoprice Select Mini user to have make it happen! So I ordered a Makerbot 1.2 style endstop from China ^^,…
Now on Printables! Check the Thingiverse page here to see previous makes and remixes. SEE ALSO: Universal Buttonbox (for example for enclosures or other printers) Ender-3 ButtonBox (for OctoPrint) This is for the people who prefer to use…
Now on Printables! Check the Thingiverse page here to see previous makes and remixes. See also: ENDER-3 VERSION ON THINGIVERSE OR PRINTABLES (Original design, made specifically to bolt to the Ender-3 LCD) Universal Buttonbox (for…
OctoPrint Raspberry Pi 3B Case One lid has Raspberry Pi symbol and a OctoPrint symbol One lid just has the Raspberry Pi symbol I had to drill the Raspberry Pi 3B mounting holes out to 3.5mm for 3mm bolts to fasten it together Raspberry Pi…
Octoprint Raspberry Pi Logo Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: No Supports: No Resolution: 0.2 Infill: 25% Filament: Polymaker Polyflex PLA Blue Category: 3D Printer Accessories
These parts allow you to mount a Raspberry Pi camera with LED illumination on your MakerFarm Prusa i3v to observe the bed of the printer. It's perfect for use with OctoPrint on a Raspberry Pi as a network printer controller. The bracket…
I use OctoPrint mainly with OctoDash some time now with 2 printers, but I was always not happy with the existing HyperPixel 4.0 display cases and I tried a few of them. They did not offer an almost hidden cable solution. The cables came…
Raspberry Pi 3B behind Monitor Mount With 40mm Fan Mount I changed the Fans of my Ender 3 Pro. Hotend 2x 12v (one for Mainboard 1 for Hotend serial) Coolingfan 2x (one for Raspberry one for Print cooling) Make sure your printer is correct…
LED light bar for the Tevo Tornado. Designed to be controlled by gcode commands. I have uploaded STL files to build a full or half configuration of the light. To build the light you will need a soldering kit! and have basic knowledge of…
This is a multi color remix of the MK3 RPi + piTFT cover by acorderob . Changes Added trim details for multi color Made the X button larger Added a RESET word For the touchscreen Raspberry Pi 3 B+ with CanaKit 2.5A Power Supply I plan to…
OctoPrint Spool Holder A spool holder and RPi case for using OctoPrint with a touch of RGB Print settings : Side Logo, Side, Led mount, Difuser and Lock: Layer height 0.2mm Infill 30% Support No Build plate adhesion None Difuser shield:…
Simple mount with no need for extra hardware. Print with support. The mount is pretty secure as is for me, but I added some wood glue to be safe. Print Settings Printer Brand: Ultimaker Printer: Ultimaker 2 Rafts: No Supports: Yes…
This is a RPi 3a+ mount for artillery genius. I' used the 2 screw on right side. My advice is to remove one screw at time and fix the mount to avoid the falling of electronic components under the body. I' ve added a cable duct to lock the…
Note: This case is designed for the Raspi 3b+ if you need a case for the 4b it is linked here . This case is designed arround the Raspberry Pi 3b+ and provides for mounting a 30x30x7 mm 5V fan. Features * Case cover with OctoPrint Logo…
*This version is designed for a Raspi 4b with fan. If you need the 3b+ version it is linked here .* Update: Per a user request I've added a case version that uses 3mm case screws. Warning: I have two Pi4B's and neither of them have…
8/17 Update: Received my Raspi 4B and mounted it in the RASPI_4B OctoPrint Case. With the design changes, the case fits the Rasberry PI 4B well. Removed the WIP status. 8/14 Update: Fixed assembly screw hole supports. 8/13 Update: Due to…
Enclosure Control via Raspberry Pi 4 and Octoprint, Power on/off Printer, Lights, Heater Displays Temperature and Humidity within enclosure. Items you will need SainSmart 4-Channel Relay Module Raspberry Pi 4 with Octopi Installed…
This is the Pi Camera Hat - A simple hat to add a Raspberry Pi Camera to your projects. The face has plenty of room for additional LEDs or accessories, and the base of the hat includes a sturdy mounting block with standard 1/4"-20…
This case is designed to fit between the v-slot profiles of the base frame of the Anycubic Mega Zero 2.0 mounted using T nuts. It has room for a Raspberri Pi 4 and a AZDelivery HW-140 DC-DC Buck Boost Power Converter to convert the 24V of…
A simple mount that can be slotted into the end of the x axis extrusion. It's designed for a webcam made by Trust. I'm sure it's easy to design an adapter for different cams or to just modify the Fusion 360 File. The goal is to have the…
This is a simple 3D printed ball mount to permanently mount a Raspberry Pi camera to a flat surface, e.g. the inside of a 3D printer enclosure. It can be mounted using double sided tape or screws. Additional hardware needed: M3x16 bolt or…
This is a station box designed for the Wemos D1 Mini and the standard 0.96" 128x64 OLED display. Get creative with Arduino code or load some of the awesome Wemos applications out there. The Wemos D1 mini will slide in and is held in place…
This is a station box designed for the Wemos D1 Mini and the standard 1.3" 128x64 OLED I2C display. Get creative with Arduino code or load some of the awesome Wemos applications out there. You can find the original little brother to this…
Just simple case for raspi 4B powered by a Prusa power supply. Everything fits nice and tight. Please set print profile to 0.2 quality, speed is not recommended. Update 9/12/2023: simplification of the model access to the raspi pinout…
RaspberryPI 3 Case, Small case for Prusa i3 Frame. It did attach to the frame with one screw only, the cover has two hooks to help keep the case centered. I did attach two top's, one clear and one with electronic skin that will help…
THIS IS A WORK IN PROGRESS I create a case for Rasperry pi 4 running Octoprint. This main case is connected to an enclosure internal unit that contain one temperature sensor, one smoke sensor, led light and fan. The target of this project…
This is a Remix of Raspberry Pi 4 - OctoPrint Prusa Mount (MK3/MK3S) with more clearence for the USB-cable. The housing used is Malolo's screw-less / snap fit Raspberry Pi 4 Model B Case , because it is configurable and fits perfectly…
Who WOULDN'T want their own life sized BMO who could say nice things and help control their 3D printer?? I love using Octoprint to control my 3D printers, an open source plugin and web interface that gives incredible remote access to any…
3d Printer Enclosure Raspberry Pi 3 Line Display, Safe Shutdown, Temperature Fan Light Controller. Designed to bolt to the outside of an enclosure - plexiglass, wood etc. Use Octoprint to control printing, lighting and fan. Temperature…
Design to uso double side tape to glue into your printer frame , the camera have 180 degress of rotation to allow you to set the better view for your set up. Dont need any support ,desing with cable managment in mind featuring two cable…
![Silicone Spacer / [SMMT] SiliconeModMould Tower (Silicone mould for Bedleveling with Octoprint on Original Prusa and Fysetc Clone Mini Printers)](https://media.printables.com/media/prints/181689/images/1697328_5268f4c6-ef1a-47d1-95e3-9e08511482d1/img_20220412_163528_048.jpg)
