Octoprint Monitor Enclosure (alternate OLED Screen dimensions)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A recreation of the Octoprint Monitor Enclosure by Daeraxa for an OLED screen with different geometry.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 49
- Makes
- 0
- Views
- 406
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Share Alike
This is a recreation of the Octoprint Monitor Enclosure by Daeraxa (https://www.printables.com/model/39752-octoprint-monitor-enclosure) with two changes:
- The size/shape of the opening for the OLED screen, as well at the “spokes” for holding it in place are redone to accommodate a different model of screen module
- The opening in the back for the USB power cable is enlarged to accommodate cables with a larger molding on the “B” side
So I decided to make one of those nifty Octoprint Monitor devices. I bought the parts. I found these OLED screen modules on Amazon [https://www.amazon.com/dp/B0B4DHCCKC] that for all the world looked exactly like all the other ones I'd seen everywhere else.
But alas, they were not.
I tried modifying the original model but eventually figured out that it was easier to reproduce it from scratch.
So here it is: It looks and works identically to Daeraxa's design and even fits nicely with the baseplates. I didn't even bother to upload the baseplates since you can get them from the original design linked to above.
Some notes:
- I also included some paint-in support inside the opening for the screen itself. On my test prints it had a tendency to sag without it. The rest prints okay without supports.
- I also just set the thing to 100% in-fill since there's hardly any interior space inside the model to begin with.
- The model is oriented so that the 4 connection points on the screen go at the TOP of the model. Although it's a bit more awkward to insert that way (and you have to check the “Flip display orientation” box in the configuration), I set it this way because the screen isn't symmetrical top-to-bottom. This orientation positions the visible screen area closer to the top of the case, which I find better-looking.
- In case anyone else wants to make things for these same OLED screens, I included the template that I developed to hold them. Feel free to use that object as a building block just as I did for this design. If you do, I'd love to hear about it. I just might want to print one and use it myself!