1 / 8
Octoprint Monitor Enclosure (alternate OLED Screen dimensions) — zdjęcie 1
1 / 8

Octoprint Monitor Enclosure (alternate OLED Screen dimensions)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A recreation of the Octoprint Monitor Enclosure by Daeraxa for an OLED screen with different geometry.

Ocena
0 / 5
Polubienia
8
Pobrania
49
Wydruki
0
Wyświetlenia
406
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Share Alike

This is a recreation of the Octoprint Monitor Enclosure by Daeraxa (https://www.printables.com/model/39752-octoprint-monitor-enclosure) with two changes:

  1. The size/shape of the opening for the OLED screen, as well at the “spokes” for holding it in place are redone to accommodate a different model of screen module
  2. The opening in the back for the USB power cable is enlarged to accommodate cables with a larger molding on the “B” side

So I decided to make one of those nifty Octoprint Monitor devices.  I bought the parts.  I found these OLED screen modules on Amazon [https://www.amazon.com/dp/B0B4DHCCKC] that for all the world looked exactly like all the other ones I'd seen everywhere else.

But alas, they were not.

I tried modifying the original model but eventually figured out that it was easier to reproduce it from scratch.

So here it is: It looks and works identically to Daeraxa's design and even fits nicely with the baseplates.  I didn't even bother to upload the baseplates since you can get them from the original design linked to above.

Some notes:

  • I also included some paint-in support inside the opening for the screen itself.  On my test prints it had a tendency to sag without it.  The rest prints okay without supports.
  • I also just set the thing to 100% in-fill since there's hardly any interior space inside the model to begin with.
  • The model is oriented so that the 4 connection points on the screen go at the TOP of the model.  Although it's a bit more awkward to insert that way (and you have to check the “Flip display orientation” box in the configuration), I set it this way because the screen isn't symmetrical top-to-bottom.  This orientation positions the visible screen area closer to the top of the case, which I find better-looking.
  • In case anyone else wants to make things for these same OLED screens, I included the template that I developed to hold them.  Feel free to use that object as a building block just as I did for this design.  If you do, I'd love to hear about it.  I just might want to print one and use it myself!

 

Tagi