Counting matching models…
The Geiger Counter as announced in Make Magazin (Germany) 3/22 (Page 8) is a great pice of work. Our Geiger Counter runs non-stop for more than one year now with ESP8266 (D1 Mini Board), running ESPhome under Home Assistant. Original…
This is a case for the ESP8266 ESP-01-based DHT11 module available via various sellers. For example, here is one that has the module and the ESP-01 as a combo. I have noticed that the temperature readings of these devices tend skew high…
Requirements: 2x countersunk M2 bolts (hex or torx head recommended for style) 2x hot melt M2 inserts Printing notes No supports needed Scale the colon part in Y dimension in your slicer to fit your particular indadescent bulb.
This is a 3D printed case (two parts: body + lid) designed for a DIY motion sensor based on ESPHome and Home Assistant. Features: 3D printed enclosure with body and removable lid Powered via USB-C (no batteries required) Direct…
For the Get creative with WAGO contest I thought it would be cool to have a case that houses a d1 mini esp8266 development board and Wago connectors to do the test setup instead of a breadboard. You need to print the following files:…
Heute ein Christmas-Weihnachts-Gadget als aktive Beziehungsarbeit... ;-) Der Plan war, einige Runen mittels LEDs durch transparentes Filament hindurch leuchten zu lassen. Das funktioniert prinzipiell sehr gut:…
This is a fully parametric Fusion 360 design for a 3D-printable enclosure intended for ESP processors (ESP8266, ESP32, etc.) mounted on breakout boards. All key dimensions and features are controlled via parameters, allowing you to easily…
Da die Länge eines kommerziellen Hundehalsbandes mit LED Beleuchtung zu lang war haben wir dieses gekürzt... Um den flexiblen (Fieberglas-?)Stab war es zu schade... Daher habe ich ein einfaches Gehäuse gebaut und am Boden zwei WS2812 /…
A minimalist case for this esp8266 infrared module you can find floating about on Aliexpress. No screws/glue required, it's just snap fit. I recommend transparent PETG for the greatest aesthetic (but PLA works too). I use it with…
I'm using the I2C port on the D1 mini to connect to an Adafruit BME680. The BME680 uses a Stemma QT connector which has different wiring than the LOLIN D1 Mini I2C port, but I was able to move a few of the wires around using pinouts found…
Ultrasonic level meter case + wifi (SN-SR20-Y1 + WeMos D1 Mini ESP8266) - Waterproof Dustproof Ultrasonic Ranging Module Pouzdro ultrazvukový měřič hladiny + wifi (SN-SR20-Y1 + WeMos D1 Mini ESP8266) - pro měření výšky hladiny pomocí…
The middle board is sawn apart horizontally. All protruding pins are cut off.
Box for a 2 channel ESP-01(S) / ESP8266 based relay board such as https://www.aliexpress.com/item/1005004533412591.html http://www.chinalctech.com/xwzx/24.html Requires the great https://github.com/mrWheel/YAPP_Box Note that this relay…
This is the housing case for the LD2450 24GHz radar presence sensor with chinese cloned Wemos D1 Mini. There's no need any crew, all are snap-in.
Key Features: Identification: The "ESP8266MOD" text is embossed on both the top lid and the side of the base for easy identification. Functionality: The top panel includes a rectangular cutout for a display (or pin access) and two…
Based on the incredible nice looking Jack O Lantern I remixed a version that changes the 3 original LED's for a fully wifi controllable battery powered version with WS2812 LED's. The led's change brightness/are flickering like a candle…
This case has slight changes to it and is based off of Digital Juice 's. This update fits the LD2410 with or without dupont wiring and the USB C version of the D1 mini ESP8266. I included a text file of the .yaml file that is working for…
ESP8266 based Deauther with 0.96" OLED display and lipo battery using store bought hardware and Spacehuhn software. 3MDF files. Use them with any slicer. For case: Infill 20%+ For hardware you will need: 1) 1x ESP8266 NodeMCU 2) 1x 0.96"…
Add on to Velux remote control to use it with MQTT and ESP8266. https://www.chrisbue.de/velux-esp8266-smart-home-mqtt/ Print Settings Printer Brand: Anycubic Printer: Kobra 2 Rafts: Yes Supports: Yes Resolution: 100% Infill: 45% Filament:…
When my fibre service falls away, it does not always reconnect, and I have to power cycle the ONT and router to regain connection to the service provider. ESP8266 code to power cycle a router if three different website pings all fails.…
Case for USB to ESP8266 ESP-07 This is an ESP8266 with integrated USB power supply and easy option to program the ESP chip. For the case I included two versions, a closed case and an version with exposed buttons. Buy on aliexpress :…
Perhaps the smallest case for the "ESP8266 D1 mini" with button, plug for the USB port and cable output I recommend printing with a layer of no more than 0.10 See result:
This is my attempt at creating an enclosed box for the ESP Development Board 8266 for my LED projects. I wanted to house the board its self along with wago connectors that I have all in one place looking neat and tidy. Wagos are great,…
A case for the power supply and the controller with an arm for the DHT22 sensor
An ESP8266 and MAX7219 display 3D-printed box is a custom enclosure designed to house the ESP8266 Wi-Fi module and MAX7219 LED display matrix. It offers a compact and organized way to protect and integrate these components, ideal for IoT…
A small inconspicuous case for a ESP8266 NodeMCU Development Board v2. Could be used in conjuction with a TTL IR transceiver-head to read Smart-Meters. For the IR transceiver head you could build your own or just buy a cheap one from…
Wi-Fi Hardware Monitor using Wemos D1 R1 Mini (ESP8266) Ready for SSD1306 and ST7735 screens Monitor your CPU, GPU and RAM over Wi-Fi OTA Firmware updates Instructions here https://fixolab.dev/en/blog/wifi-hardware-monitor Model available…
Code and instructions soon https://fixolab.dev/en/blog/ambilight Model available at Maker World https://makerworld.com/en/models/574743 Models https://makerworld.com/@fixolab
printed in petg with 0,2 layer height the top part should press fit almost perfect the holes at the bottom part are for magnets recovered from gizeh papers and should press fit too … if not a little drop of superglue should help
I wanted to create a forced air monitoring device to measure several parameters in my living space. Fan is used to force air in and around the sensors, this way stagnant air or heat-soak is not an issue. Measures Temperature, Humidity,…
An enclosure for the CAJOE RadiationD v1.1 geiger counter, with space for an ESP8266 for integration with home assistant through ESPHome. Works just fine without the ESP8266 as well. The lid has little notches to press-fit into place.…
Case for Esp8266 Wemos D1 mini USB C with reset button , very easy to print. Please note that when you buy this item it may arrive with slightly different dimensions because the cutting process is not very precise. I myself have had…
I ported the original arduino software by werner_rh for an Wemos D1 Mini because I wanted to monitor the drying sensor data with grafana. Therefor the sensor data is transmitted via mqtt an transered to influxdb using telegram. The…
Want to make one for yourself? Check out the full build guide over on my blog! This past year I have become *completely* obsessed with HomeAssistant, adding a number of sensors and smart products all over our house all controlled through…
This is the case of my self-designed window sensor. It is based on an ESP8266 and lasts several years on one battery charge. I designed the board especially to get the deep-sleep under control. In my youtube-video (…
This mount is designed to attach an ESP-01 microcontroller to a krom schröder gas meter. It fits into the recess of the gas meter in which magnetic pulses can be read with a reed switch. In my youtube-video ( https://youtu.be/i9hPf0uNzFE…
This print takes a LoLin ESP8288 module along with an adxl345 g- force / acceleration sensor. The sensor is tilted by 45° in all three axis. Like this, the accelerations measured in all axis can be combined to get a better resolution in z…
Minimal housing for ESP8266 - Module (like Lolin). PINs are removed to achieve a flat shape - ideal for WIFI only DIY projects. Module is inserted; top and bottom half are glued shut (few drops of super glue). Reset and flash button as…
The Geiger Counter as announced in Make Magazin (Germany) 3/22 (Page 8) is a great pice of work. Our Geiger Counter runs non-stop for more than one year now with ESP8266 (D1 Mini Board), running ESPhome under Home Assistant. Original…
I made this box to house the electronics for a led strip project. It has a friction fit area and cutout for these barrel connectors: Amazon.com : 12V 2A Power Supply AC Adapter, AC 100-240V to DC 12 Volt Transformers, 2.1mm X 5.5mm Wall…
The IoT Click: The IoT Click is a multifunctional WiFi button for home automation. Easily automate your smart lighting, sockets (e.g. WLED, Shelly, devices from home assistant, etc.) with just the push of a button. Required Parts: Name…
Made this model to support a ESP version I am sure is the new ESP8266.
Case for RigExpert + Arduino board which features a micro usb port instead of USB-A port on a regular Arduino Uno. Features some slack for the Arduino board inside, as the D1 ESP8266 board I have is a knockoff and is half a millimeter…
Simple model of a clone Wemos D1 Mini, taken from direct measurement. Used for fitting/checking purposes in a case I'm designing. Category: Electronics
Gridfinity container for storing Wemos D1 mini boards.
Optimized Translation: WordClock 23x23cm IKEA Ribba Project Required Materials: 23x23cm IKEA Ribba Frame If you test it with the HOVSTA frame, please provide feedback. ESP8266 NodeMCU 114x WS2812B RGB LEDs (60 LEDs/m, self-adhesive) 30AWG…
WiFi Pixel Controller for WS2812 LED strips and fairy lights based on WLED firmware. Project description: https://www.maltepoeggel.de/?site=pixelcontroller Circuit board at Aisler: https://aisler.net/p/GZWNWPUL Circuit board at OSH Park:…
This is an awesome system for WLED. This is the case for it. It is specifically modelled for: Controller AZDelivery NodeMCU ESP8266: amazon.de 2x USB-C Connector Female with screwholes: Aliexpress 4 Big Screws 4 small screws 24AWG Cables…
Zum Einbau meiner Smart-Home Steuerung mit Wemos D1 mini WiFi habe ich mir diese Adapterplatte erstellt. Darauf kann passend auf eine Verteilerdose wie in Beschreibung ein Doppelrelais, 220V-USB Konverter, und Wemos D1 mini installiert…
An ESP8266/NodeMCU enclosure incl a JST connector for a LED strip, a barrel connector for DC power and 4 dupont connectors. Used this for the other part of the dupont connector:…
This is a case for the ESP8266 ESP-01-based DHT11 module available via various sellers. For example, here is one that has the module and the ESP-01 as a combo. I have noticed that the temperature readings of these devices tend skew high…
The watch works without an RTC module. The accuracy can be set in the source code (line 25, variable "accuracy"). The pin assignments are commented in the source code. The time is set using buttons. The display must be pressed carefully…
Every time I build a little electronics project, I hate how the components usually just rattle around in the case. So I designed this customizeable solution in OpenSCAD that lets me configure the number of pins, the sizing and spacing,…
I made two versions. Both contain an cable outlet in one corner. One version includes also the USB power outlet. M3x5mm Screws fit best. I recommend PLA with an resolution of 0.2mm and Support.
Gehäuse für ein ILI9341 TFT 320X240 Display Das Gehäusedeckel wird nur aufgesteckt. Das Display wird unter der Kappe mit 4Stück M3 X max.10mm Schrauben festgehalten. Das Gehäuse bietet genügend Platz um darin einen ECP32 oder D1-Mini etc.…
Mini-HEX ESP8266 Wall Light Für meinen Voron 2.4 brauchte ich drei Stück der Arduino WS2812B LED mit PCB. Da eine 100 Stück Packung nicht recht viel mehr kostete und man LED immer brauchen kann habe ich für die übrig gebliebenen eine RGB…
a minimalist case for node mcu esp8266 un support minimalist pour nodemcu esp8266 soporte minimalista para nodemcu esp8266
Octoprint monitor weather station esp8266 D1 mini bme280 case What a mouthful. It shows the diversity for which this can be used for. Usecases: Octoprint monitor Weather station InfluxDB querry NTP clock Desktop widget Whats needed: Wemos…
These are the 3D-printed components for my freezer door alarm system. Construction instructions are available at the following link: https://www.instructables.com/Freezer-Door-Alarm-System-Using-MQTT-and-ESP8266/
I used an ESP8266/Wemos D1 mini flashed with ESPHome and connected to my HomeAssistant. Cramming everything into the case is quite a challenge, but in the end it should fit. I glued it right beside my Desk so I can toggle multiple…
Verbessertes Gehäuse für ein ILI9341 TFT 320X240 Display (Remix von https://www.thingiverse.com/thing:6918515 ) Das Gehäusedeckel wird nur aufgesteckt. Das Display wird unter der Kappe mit 4Stück M3 X max.10mm Schrauben festgehalten. Das…
This is a remix of the case by Lorenz Nimmervoll. Thanks to him! My changes: snap fit case ventilation in cover fixation of the Power Jack simplyfing inside for less supports/material only one hole for cables
Requirements: 2x countersunk M2 bolts (hex or torx head recommended for style) 2x hot melt M2 inserts Printing notes No supports needed Scale the colon part in Y dimension in your slicer to fit your particular indadescent bulb.
Used blue transparent PETG and some yellow PLA+ and standard supports 0.2 resolution, 3 bottom layers, 4 top layers, 3 maybe 4 walls I had to wap filament at 98/101 Printed on Neptune 4 Plus (OpenNep4tune mod)
Case for MAX7219. This is a remix that accepts an ESP8266 NodeMCU style chip.
I got this model from GrabCAD, made by Blend Me Now, but resized to the real size of the ESP8266. I hope I helped with your projects, guys!
Small and thin case for NodeMCU ESP8266 that has a removable top, well-fitting micro USB port and a good fit for the board itself. The cover can be clean or have a WiFi logo cutout. ❗You must desolder the pin headers for proper fit. Tip:…
This is the latest version of the original case that I designed for the “main” PCB for the BrewPi-ESP project: https://github.com/thorrak/brewpi-esp8266 As the years have gone on, I have designed multiple variations of the PCB – this case…
ESP8266 Box This is a small box for your small temperature sensor! With the right software you can easily build your own wifi thermometer! You only need jumpers, an esp8266 and a dht sensor! Have fun rebuilding!
A small backplate to attach a ESP8266 to. Can either be powered via the USB cable. I've drilled out a small hole in bottom left corner to connect the cables to the MCU. Attaches with 3 mm or similar screws or bolts, with additional 2 mm…
This is a version of the original case that I designed for the “main” PCB for the BrewPi-ESP project , adapted specifically for the “All-in-One” PCB . As the years have gone on, I have designed multiple variations of the PCB – this case…
EN: This compact housing is designed for an LD2450 radar sensor with Bluetooth antenna and an ESP8266 Wemos D1 Mini V4. It is based on F-Square's multi sensor design , but is a new development except for the rear ball joint . The radar…
The full project build instructions here: https://www.instructables.com/ESP8266-Weather-Widget-V20/ Did not like the case/housing available and wanted to make my own and customize it! Code for display/esp (has instructions on how to…
Case for Onewire hub with Esp8266 and breakout board. Breakout board: https://www.aliexpress.com/item/1005004365502115.html M3 inserts: https://www.aliexpress.com/item/4000232858343.html Wago's:…
ESP8266 + BME280 enclosure with quick-slide mounting base and printable board lock for a tool free installation (not including a screw or two for the enclosure mount). I flipped the ESP8266 board inside the enclosure so the chips were…
ESP8266 + DHT22 Enclosure with quick-slide mounting base Category: Electronics
Automatische Hühnerklappe Die Klappe habe ich aus 3mm Sperholz ausgelasert, kann aber auch gedruckt werden Alle gedruckten Teile sind mit PTEG gedruckt, Schichthöhe 0.2mm, Wände 5 Schichten, Infill 20% Die Steuerung ist über einen ESP8266…
Transform any 120 mm PC fan into a compact, voice-controlled desktop cooler. This download contains three printable parts: Low-profile stand – slips under most monitors and accepts the NV-AA1-12 Airflow Amplifier for boosted flow.…
Here you have my enclosure for WeMos D1 Mini ESP8266 board. All pins, USB port and reset button are easily accesible. Also pin labels are visible. Print it from PETG
Case for the Deek-Robot DK-W8288, ESP8266 with 0.91" Oled. Availaible from AliExpress Alternative . I noticed the buttons aren't on the exact location when you order multiple modules, so I have made the holes for the buttons a little…
Description: Build your own connected smart scale with this 3D printable enclosure! This design provides a robust and clean housing for the essential electronics, allowing you to create a WiFi-enabled scale that can send weight data to…
In this project, we’ll dive into building a 3D-printed RC boat powered by a 1000KV BLDC motor, steered by a SG90 servo, and wirelessly controlled using an ESP8266 + NRF24L01 module. This DIY boat is perfect for makers, students, or…
Ich hatte und habe noch viele ESP8266 und wollte diesen bei dem Projekt verwenden. Da es für mich erstmal ein PoC ist wird der ESP per VIN extern mit Strom versorgt daher keine Batterie oder Solar Elektronik. ==== I had and still have…
NTP clock with ESP8266. I removed the toggle switch from the back because I can't find a way to turn off the LED. :P You need: Adafruit 1.2" 4-Digit 7-Segment Display w/I2C Backpack https://www.adafruit.com/product/1269 Adafruit Feather…
ESP8266 node MCU V3 Case from AZ-Delivery with additional space for screws
Imprimir “Cuerpo2” sin soportes, “Tapa2” con soportes ( son muy pequeños ).
A quick project to build a home automation remote control for kids. My plan is to program the included ESP8266 for sending button triggered MQTT messages to a home assistant server over WIFI. This ESPHome code is a good starting point for…
Simple petit boitier vissable avec sortie ronde pour une sonde ds18b20 par exemple Dimensions esp8266 : 58 mm X 31mm Distance entre le trous environ 25mm et 52 mm
I started my Home Assistant instalation a few day ago and now added these sensors to it (will make a window reed contact next on the same base). The ESP ist running on the ESPhome software (you can find a good guide in how to wire up the…
Case for HomeKit project for IR remote old devices (television that doesn't support HDMI-CEC, a speaker set that is connected to it or just anything that may be controlled via infrared remote even an A/C) describe on gitlab link .…
Motorized Ikea Tupplur blinds with Nema17 motor, TMC2209 driver and ESP8266(nodemcuv2). Print without support. Need M3x5x4 Thread nuts and DC-DC 12V to 5V buck converter for assembly. Fits the original mounting holes. Hardware: - Nema17 -…
