1 / 10
Radar Presence Sensor HLK-LD2450 + Wemos D1 Mini V4 ESP8266 Board | Radar Präsenzsensor HLK-LD2450 + Wemos D1 Mini V4 ESP8266 Board — image 1
1 / 10

Radar Presence Sensor HLK-LD2450 + Wemos D1 Mini V4 ESP8266 Board | Radar Präsenzsensor HLK-LD2450 + Wemos D1 Mini V4 ESP8266 Board

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Preliminary estimate for PETG

€1.61 – €1.97 net (excluding VAT)

For file: Radarsensor HLK-LD2450 Wemos D1 Mini V4_0.4n_0.25mm_PETG_XLIS_1h45m.bgcode

This is an estimate for one file. You’ll confirm the exact price before ordering.

File and estimate settings

File used for this estimate

Average indicative estimate: €1.79 excluding VAT (range midpoint).

Weight reported by the author
25 g
Print time reported by the author
1.75 hr
Source material
PET
Estimate material
PETG
Estimate printer
Bambu Lab P1S - 0.4 nozzle
Estimate process
0.20mm Standard

Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.

Saved on this device.

Compact housing for a LD2450 radar sensor with Bluetooth antenna and an ESP8266 Wemos D1 Mini V4.

Rating
0 / 5
Likes
50
Downloads
438
Makes
1
Views
2,518
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike
EN:


This compact housing is designed for an LD2450 radar sensor with Bluetooth antenna and an ESP8266 Wemos D1 Mini V4. It is based on F-Square's multi sensor design, but is a new development except for the rear ball joint. The radar sensor and ESP board do not need to be soldered, as there is space for the connectors. The ESP board is snapped into the housing and can also be fastened with M2 screws if required. The radar sensor and Bluetooth antenna are inserted into the cover and secured with a piece of filament. The cover simply snaps into the housing when closed. The housing has ventilation openings at the top and bottom for heat transport. Standard USB-C plugs fit through the foot.
 

— I would be very happy if you have as much fun with the things as I do. — 

 If you like Buy Me a Coffee :-) Thank you very much!

DE:

Dieses kompakte Gehäuse ist für einen LD2450 Radarsensor mit Bluetooth-Antenne und einen ESP8266 Wemos D1 Mini V4 konstruiert. Es lehnt sich an F-Squares Multi Sensor-Entwurf an, ist aber bis auf das rückseitige Kugelgelenk eine Neuentwicklung. Radarsensor und ESP-Board müssen nicht verlötet werden, da Platz für die Stecker vorhanden ist. Das ESP-Board wird ins Gehäuse eingerastet und kann bei Bedarf auch mit M2 Schrauben befestigt werden. Radarsensor und Bluetooth-Antenne werden in den Deckel eingeschoben und mit einem Stück Filament gesichert. Der Deckel rastet beim Schließen einfach ins Gehäuse ein. Das Gehäuse hat oben und unten Lüftungsöffnungen für den Wärmetransport. Durch den Fuß passen handelsübliche USB-C-Stecker.

Tags