Counting matching models…
This adapts the corner piece of the original file to allow you to mount the filament sensor along the riser. Tony F's File was adjusted to allow the filament sensor to be mounted, the other files were used as references and deserve credit.
ESP8266: https://www.amazon.de/gp/product/B01E3CAVN6/ref=oh\_aui\_search\_asin\_title?ie=UTF8&psc=1 Sensor:…
I wanted to have the filament run out sensor hang over the 2020 extrusion, as the Two Trees Bluer Plus uses an extrusion with a flat front but standard 2020 track on top. This uses M3x10 to self-tap into the plastic, and used the M5…
I did a remix of two great designs to create a taller riser because my ptfe was rubbing on the glass after installing the cyclops extruder. You can print 4 corners without the holes if you are using the stock filament sensor. The text is…
Three knurls to choose from. The spiky one is part torture device, watch out! Cats seem to like it too!
Box for Arduino Nano, Display and sensors. It wont likely fit your components as I made it for my needs but wanted to share it anyway. You are free to remix it as much as you wish. (Yes I know DHT22 can measure temp and humidity so the…
This case fits a Raspberry Pi Pico, a sensor and 3 AAA Batteries The sensor is a AHT20 / BMP280 combo with digital temperature, humidity and air pressure. It suppors the I2C interface so reading values with the Pi Pico ist easy. Some…
Depending on your windows and printing tolerances, you may print in ASA or PETG if the holder fits snugly. I printed in TPU with the flexible wing version and they fit securely, without any glue, and are easy to remove.
This is a holder for the YoLink temp sensor for your refrigerator and freezer. There are six spots on the back to glue round 6mm x 2mm neodymium magnets. I recommend putting a magnet in all six spots. I used super glue to keep them in…
This is a small Standalone Option of the D1 Mini Touch Sensor Module. Print Settings Printer: BiquB1 Rafts: Doesn't Matter **Supports:** No Resolution: 0.2 **Infill:** 25% Filament: Inland PLA Black Category: DIY
Prusa Referral Program: Need to upgrade your Printer? Referral Links🔗 for an extra 1kg PETG Urban Grey at checkout with the purchase of a Prusa Core1 / L / XL . Prusa T&Cs . Allsky Meteorite Camera Inspired by the Thomas Jacquin concept.…
Mount an IR interruptor sensor at car bumper height. The sensor will turn on a lamp when IR beam blocked. Used for backing into the garage so the bumper will clear the garage door. Back the car in until the lamp turns off. The 3D part…
Remix to fit these cheap aliexpress bluetooth sensors
A vertical mount for a cheap tuya zigbee or wifi PIR (passive infrared)/mmWave motion presence sensor I found on AliExpress that is compatible with the IKEA SKADIS pegboard system. I printed it vertically with tree supports for the hooks.…
Aqara mount models from @volan are not suitable for screw mounting which is necessary for some wall types. When I tried to use hole in original base for screw, it break off very easily when adjusting the sensor. This is simple remix of…
[Edit] Don't do what I did. Install the sensors the other way around. My silly way makes it very challenging to get them out. [Edit] Updated two files to fix slicing issues. Easy print, no supports. Secure to door/window using VHB or…
Print as shown in the picture (layer 0.12), without supports inside. Build of Materials: Switch OMRON D2F-5 (use NO) - 1pcs. Connector jst 2p 1.27 - 1pcs. Steel ball 5mm - 1pcs. ECAS04 (remove the rubber part) - 1pcs. M2x12 - 2pcs.…
A replacement zip tie mounted TPU case for WAHOO RPM SPEED sensors
09.02.2026 Update: add new Front part with new necenano support, which uses low-profile USB-C connector. 18.02.2024 Update: add Base.stl file and upgraded step file In relation to the original model: - the profile of the adjoining surface…
This one sits a little higher and comes forward a little to align with the extruder. It also looks nice.
Zircon Multiscanner Stud Sensor/Finder Models 440 540 wall mountable using screws. No supports needed, print on end as pictured. Holes 40mm spacing.
Smart Automatic Closure: Automatically opens and closes when an object is detected at a distance of 10 cm. Easy Installation: Compact design with 3D printed casing for fast and easy assembly. Energy Efficiency: Powered by rechargeable…
This is a 3 piece model of the angle sensor AA ROT 120 used in cars.
I have my Voron installed under the desk, making access to my filament sensor difficult. Therefore, I decided to relocate it to a more convenient place. However, I was unable to use any existing mounts as most of them are dedicated to the…
Requirements: You will need two 25mm M4 screws for installation. I bought the Bowden parts on Amazon as a kit: https://www.amazon.com/gp/product/B0CMQN1681/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1 This remix of the Elegoo Neptune 4…
The opening for the PTFE tubing has been enlarged to allow for the filament sensor connector to pass through while you are using a enclosure. Remix from the OG:…
Halterung für einen Filamentrunoutsensor. https://de.aliexpress.com/item/1005003565228895.html 2x M3x16
I printed the original model for my Atillery Sidewinder X4 Pro. After a while the screw came loose and sensor rotated downwards which made the filament move less smooth than before. So I made this remix based on @waintdeir's model,…
This part is designed to carry Aqara's Zigbee Door/Window sensor and recess it as subtly as possible within either the door frame or door. Installation of the sensor into the door frame avoids mortising the door and potentially…
Adapter / Holder / Mount, for a common rectangular humidity and temperature Sensor. Can be installed and removed quickly - the same grip shape as the “Spool Holder”. Suitable for installation on the "Printer Frame" part. Material:…
Base on the original idea of Maple Leaf Makers , I made this mod for the new Smart filament sensor for Orbiter v2 . Had to redo everything so it's not really a remix of parts, but of idea. Print in ASA/ABS with Voron settings, no support.…
Created this as a cover/case for the enviro sensor-Pi fits Pimoroni PIM486 Sensor board and fits snug on the front to protect/cover it. I used 90 degree GPIO risers and modified the case as you can see and allowed me to get it away from…
For all of you who might feel that your stock TEVO tarantula's hot end is inadequate in that it doesn't have a part cooling fan nor a mount for an inductive sensor, than these parts are for you. The fan vent holds a 5015 fan and provides…
A simple shelf to mount an Ikea Vindstyrka and Amazon Alexa Echo on the wall with holes to allow cable routing through the bottom. If you would like the exposed infill as per the pictures, I have uploaded the modifier shape to allow…
Zůstala mi deska z-stopu a tak jsem předělal celí držák ….
Just a very simple basic case for the RAK Wisblock and the RAK Radar Sensor. I used it with the following components, using Meshtastic: Core: RAK4631 Base Board: RAK19007 Radar Sensor: RAK12013 To mount the board you can use the bigger…
This is my version of a hinged holder for the Aqara door and window sensor to be mounted on a garage door. It uses a piece of 1.75mm filament as hinge pin. I made the clearances fairly large to ensure easy swing since the magnet is quite…
No extra tips here. This is a remix of a remix. Follow the rabbit back a few makes for better info from better makers. Last photo is the original remix by huberjer.
So this is an evolution of my 1x1 GR model that just held the display, as I wanted to have a double-sized unit as a temperature and humidity sensor. This uses my ribbed casing design, that has 2 heights at which panels can be slotted in.…
Will probably not fit other bikes as it hides the sensor in a very specific part of the frame. It uses 2 zip ties and an M4 bolt, and integrates a cable guide. I use it with this magnet holder:…
Allsky Meteorite Camera Inspired by the Thomas Jacquin concept running on Raspberry Pi. Make use of your ZWO Camera Sensor for full time monitoring of the night sky. Examples of Allsky Images taken through long exposures and to generate…
This is made to mount the Bigtreetech Smart Filament Sensor to a 20X20 extrusion. The hole pattern for mounting the sensor allows the sensor to be mounted horizontal or vertical. I printed mine in PETG since this mounts outside the printer.
This custom holder is designed to store up to 8 PASCO conductivity sensors safely and efficiently. Each sensor fits into a dedicated slot with a recessed base to prevent slipping. The structure saves space and keeps the lab organized. The…
I made this to fit https://www.printables.com/model/772459-boost-your-multicolor-prints-central-filament-sens It allows the filament sensor to still pivot. All I had to use it the original 2 screws and 1 hex screw in the back of the…
Mount wall/desk holder for Mijia aka Aqara Lux sensor. (40.5mm dia 12mm thick) One version for setting on edge or attaching with command strips (left or right, horizontal or vertical). Another version with slotted screw holes 40mm apart.…
I didn't want to stick it to the wall but hang it => spacer with a hole for the screw head. Nechtěl jsem lepit na zeď ale zavěsit => distanční podložka s otvorem na hlavu šroubu.
I made the side PTFE mount longer, so the PTFE tube is directly above the spool.
This Radar Presence Sensor is easy to build and pretty cheap considering its performance. The firmware uses ESPHome . The sensor uses the universal ball-joint design so it can be oriented for accurate detection. I provide a skadis mount…
*PRINT AT 120% SCALE BECAUSE I AM BAD AT CAD * Filament breakout sensor. Uses a rolling limit switch to detect when there is no tension on the filament being produced indicating a breakout. I intend to use this to sound an audible alarm.…
Wall Cradle Bracket for Sonoff 02LD Temperature Sensor & Probe. I recently purchase the SONOFF SNZB-02LD IP65 Zigbee LCD Smart Thermometer (Probe Version). With the probe attached to the boiler flow pipe the temperatures can be monitored…
A while back, one of my PrusaXL filament guides' coupler started popping off, and I saw someone posted a version that used PC4-M10 couplers (instead of the cheap metal Bowden collets). Around the same time, my PrusaMINIs had issues that…
Using the bracket designed by DigitalSolo as a base, I snipped off the original mounting points and added some to fit in my Miata's engine bay (NA, LHD). This mounts on the side of the fuse box in the engine bay in place of the wiper…
Wind sensor bracket for Aliexpress wind sensor Wind sensor bracket for Aliexpress wind sensor for wall mounting. I have a Shelly Uni installed and therefore needed a 0-10 V wind sensor that needs to be mounted on the wall. Here's the…
Bracket design on tinkercad to hold outage sensor from Creality. Reuses the orignal screws. Bracket can be used with bowden tube or without. There is holes drilled but no threads in the hole. I used 6mm fitting on top of bracket. For the…
I like the original from lazyslacker (credits go to him), but I didn't want to stick my sensor to the mount with the double sided tape. So I added 2 holes for magnets (8mm diameter, 1.8 - 2mm height). The Aqara sensor already has two…
This fits the new Anycubic Ace Pro that comes with the Anycubic Kobra S1 Combo. The temperature and humidity sensor used as well as the silica gel packets are listed below. Temp/Humidity Sensor: https://tinyurl.com/bp8r6437 Silica Gel…
config setting [bed_mesh] speed: 300 horizontal_move_z: 2 mesh_min: 30, 30.5 mesh_max: 225, 225 probe_count: 6, 6 zero_reference_position: 128.00,128.00 [scanner] mcu:idm speed: 10. lift_speed: 10. backlash_comp: 0.5 x_offset: -8.9…
We installed one of these and put it in the wrong spot! To fix our mistake, we needed to fill the hole. Example printed with PETG
A 45 degree remix of the filament runout sensor bracket. Puts less strain on the filament path as it enters the printer.
Just adapted to use 5mm ball since I didn't have 5.5mm one
After printing the enclosure for Adventurer 5M I hit the infamous problem of filament sensor which is not working in reverse direction. I disassembled the sensor to figure out why this is happening. It turned out, that the metal bracket…
A replacement mount for parking sensors , designed to be glued in place instead of the original mount . Designed for standard VAG 7M3 919 275 parking sensors (compatible with both right-angle and straight connectors). The holder can be…
MOD Sidewinder X4 Passa Tubo PTFE. Monta a posto del porta bobine, include foro per avvitare sensore rottura filamento.
I couldn't find a model for the CAN EBB36 mount on the Orbiter V2 with a filament sensor that doesn't use hex stand-offs and at the same time provides free access to the filament sensor connector, so I designed a simple mount myself. I…
Přidaní o matku pro uchycení bowdenu .....
The Apollo Automation R PRO-1 PoE mmWave Multisensor (LD2450 and additional LD2412 add-on option) is our most advanced presence sensor. Designed for power, precision, and reliability, the R PRO-1 is a compact PoE mmWave sensor built for…
This is a filament sensor for the LGX Lite Pro, based off the great sensor by Max Luck. Use this to detect filament runout or when filament hits the extruder in a MMU system. There is 1 with the LGX Lite Pro emblem on it, and 1 with just…
A mount for the TronXY "TR" ABL sensor on the HeroMe Gen7 printhead assembly. Derived from the existing ABL mount "HMG7.2 Hallon Medium ABL Left Mount", which is a few mm too short for the "TR" sensor in combination with a Volcano hotend.…
All of the sensor offset mounts I could find were based on the original Elegoo CC design with 2 screws. Lots of people now have the one w/ a flap and 1 screw, including myself. So i made one. Only tool you need was provided w/ the…
The current design of this protective case establish a stable connection from sensor to soil. Even when it is capacitive sensor a permanent contact to soil is neccesary for reliable moisture values. Examples of these values are shown in…
I see the potential in this mod, so I recreated it because I wasn't able to open OpenSCAD as parametric.
12mm to 18mm inductive probe adapter, screw fit Category: 3D Printer Parts
I designed this holder to mount my first-generation Ikea Trådfri motion sensor to a metallic bracket. The magnet I used has a 12 mm diameter and is 4mm thick. onshape link
Added side supports to use the Cloweit LBE-04 inductive proximity sensor
This mount allows for the filament path to pass safely between the sides of the T2 belt and allow for the use of a filament runout sensor on an Ender EZ Belt. The mount is angled to allow for the filament to not contact the T2 belt.
WiZ Motion Sensor adapter plate for mounting to walls with no damage. Use one M4 x 6mm screw to attach factory WiZ mount to plate. Mounting Plate versions in round or square, adhesive (i.e. Command Strip) or four 3mm x 10mm magnets. Print…
V2 Bigger chamfer for switch for easier operation. Bigger yet more elegant holes for better sensor operation and buzzer sound. The back is the same as V1. I liked Alleycat's design and its remix, but wanted more space for Sertec 3000 mAh…
I remixed this model to add ecas 4mm fittings then made it larger and longer to improve reliability.
Credits: All credit goes to SilencedFrost , who has provided incredible add-ons for Neptune 4 printers. I just took this incredibel work and adapted it to my preferences. This custom mount integrates the optical filament runout sensor by…
Having problems identifing the correct cable in your Lego model after changing out your controller or batteries, just like me? What an age we live in, where years old problems can be solved in house with a bit of plastic and heat. For…
Mod for Logitech G29 , G27 , G25 , or Driving Force GT pedals by replacing the stock potentiometers with Hall effect sensors for smoother, more precise input and zero wear over time. This printable bracket makes the conversion simple and…
Simple base to instal humidity sensor on 3mm Plexi. Printed from PLA with small suports
This mod is designed for the popular low-cost USB handbrakes sold on AliExpress. The stock PCB is removed and replaced with: Sensor mount for a 49E linear Hall-effect sensor (fixed with hot glue, check the images) Magnet holder for a 8×3…
This is a 3D printed case (two parts: body + lid) designed for a DIY motion sensor based on ESPHome and Home Assistant. Features: 3D printed enclosure with body and removable lid Powered via USB-C (no batteries required) Direct…
This is a protective cover cap designed for the Voron ERCF Filament Stress Sensor . Its purpose is to hide and protect the wire soldering area, giving the sensor a cleaner look and additional mechanical protection. Features Protection:…
NOTE: This design is a tight fit on purpose - You may need to de-burr or sand down the inner edges of the circle to get the sensor to fit (purely because it needs to be a tight fit due to vibrations etc) A Vent cover for the AD5X/AD5M I…
This is a remix of @nhchiu 's brilliantly simple ProtoXtruder with a lever like @Prusa3D Nextruder and @Prusa3D IR sensor. The extruder has less axial play in the gear area. I redesigned the extruder looking from the axis of the filament…
I made a 40mm Tool Length Sensor holder for My CNC. Designed to go on a standard 80mm aluminium profile. Designed around 2 m5 bolts to hold it in place. I uploaded 3 designs, the differende is pure cosmetic. Pick what pleases your eye. I…
The model from Alia5, just with glued Wissencat's Meowburner ears. The ears are much thinner than original Meowburner ears as they would conflict with the motor mount.
Safely wall mount Aqara W100 Climate Sensor using two poster size command strips. Includes versions with alternate mounts, two holes 40mm apart, and 4 x "3mm x 10mm" magnets. For stability, since the button pushes are on the edge of the…
Support me by using my referral code on Prusa Website: @maxcou_485438
Remix to move the sensor to a higher position on the printer. Added cable tunnel with Print Bridges that can be removed after printing with a sharp knife. (see pic) Added Trimmable Print Supports on bracket angle that can be removed after…
Remixed Helixios's nice model to add a 1.5mm rad to the PTFE protrusion, to reduce risk of cracking. I also changed the PTFE protrusion to use M6 threads which is the PTFE adapter I have available. I personally printed mine vertically in…
I needed a third hand to hold the tangle sensor tube while I depressed the PTFE holder with one hand and inserted the tube securely with the other. Printed in PETG for flexible strength. Used the Plus4 Strength profile. Added a 8mm brim…
