YoLink Refrigerator Temperature Sensor Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Holds the temp sensor to the refrigerator and freezer walls with magnets
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 41
- Makes
- 0
- Views
- 165
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
This is a holder for the YoLink temp sensor for your refrigerator and freezer. There are six spots on the back to glue round 6mm x 2mm neodymium magnets. I recommend putting a magnet in all six spots. I used super glue to keep them in place. PETG is what I printed these in with 1mm perimeters (top, bottom, sides). No supports are needed for this. Later I will look at making versions that will take larger and fewer magnets.
Temp Sensor Mount2 has some reinforcement because the temperatures in the freezer were making the bracket a bit brittle. Added spaces for two more 6mm x 2mm circular neodymium magnets. No supports needed. Print with 1-2mm perimeters (top, bottom, sides)