YoLink Refrigerator Temperature Sensor Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holds the temp sensor to the refrigerator and freezer walls with magnets
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 165
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a holder for the YoLink temp sensor for your refrigerator and freezer. There are six spots on the back to glue round 6mm x 2mm neodymium magnets. I recommend putting a magnet in all six spots. I used super glue to keep them in place. PETG is what I printed these in with 1mm perimeters (top, bottom, sides). No supports are needed for this. Later I will look at making versions that will take larger and fewer magnets.
Temp Sensor Mount2 has some reinforcement because the temperatures in the freezer were making the bracket a bit brittle. Added spaces for two more 6mm x 2mm circular neodymium magnets. No supports needed. Print with 1-2mm perimeters (top, bottom, sides)