VAG Parking sensor mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement mount for parking sensors (7M3 919 275), designed to be glued in place instead of the original mount.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 39
- Makes
- 0
- Views
- 234
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
A replacement mount for parking sensors, designed to be glued in place instead of the original mount.
Designed for standard VAG 7M3 919 275 parking sensors (compatible with both right-angle and straight connectors).
The holder can be glued in place using a hot glue gun. It allows flexible mounting angles, which is useful since some aftermarket replacements have the sensor rotated by 90 degrees.
To install the sensor into the mount, press it in and twist it 90 degrees until it clicks into place. The twisting motion locks the sensor securely using the flexible arms.
Recommended print settings:
PETG or ASA (for heat and UV resistance)
Top/Bottom Layers: 0 (Cavity for glue)