1 / 4
49E Hall Sensor mod for USB Handbrake
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mod for USB handbrake using a 49E Hall sensor and an 8×3 mm neodymium magnet.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 17
- Makes
- 0
- Views
- 319
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This mod is designed for the popular low-cost USB handbrakes sold on AliExpress. The stock PCB is removed and replaced with:
- Sensor mount for a 49E linear Hall-effect sensor (fixed with hot glue, check the images)
- Magnet holder for a 8×3 mm neodymium magnet (just use pressure)
What you need
- 1 × 49E Hall sensor
- 1 × Neodymium magnet 8×3 mm
- 3 wires cable
You can connect using arduino, in my case I used this adapter:
https://www.printables.com/model/933848-g27-adapter-with-handbrake-and-button-box