Counting matching models…
Edited version of the original (https://www.printables.com/model/181710-logitech-g29g920-steering-wheel-magnetic-paddle-sh) to fit a pair of 20x6x1.5mm magnets on both sides. I used magnets with a 1.6kg pull force that I had laying…
Tightening the nuts on your Logitech G27, G29, G920, or G923 steering wheel doesn’t have to feel like an arm-wrestling match with a gorilla. This wrench, based on the original design by magno23 (thanks for the initial work!), has been…
-Parts List: M3 Screw (atleast 16mm long) M3 Nut (can also be replaced with a threaded insert) Plastic Glue -Assembly: Put some grease on the shaft then put one half of the knob on the shaft so it slots in and can rotate freely then glue…
El modelo necesita 4 tornillos de M3.5 y corona de 7mm. Está hecho para que no tengas que usar soportes. Sus dimensiones son 120x80x69mm.
Mod for Logitech G29 , G27 , G25 , or Driving Force GT pedals by replacing the stock potentiometers with Hall effect sensors for smoother, more precise input and zero wear over time. This printable bracket makes the conversion simple and…
PG29 threaded blind stuffing to close unused PG29-openings in housings. Adapter for 1xPG9 cable gland for smaller diameter wires. Unused PG9-openings can be closed with PG9 blind stuffing with PG9-thread. [1] Thread types: PG thread…
This is my version of the gears for replacing the potentiometers of the Logitech G29 (should be the same for G25, G29 and G920 but I can't guarantee it, comment if it works for you!), with generic dirty cheap Aliexpress ones (WH148) as…
Print the whole kit from the original model and give him some love for his work, then print my parts and assemble as intended. You can adjust the shims for your own phone by taking some quick measurements, and I recommend a dab or two of…
🔁 Compatibility The 3D prints can be used on any Logitech G29 , Logitech G920 and Logitech G923 . The only print that's specific to a Logitech variant, is the lower bezel , which at the moment is available only for the G29, or PS4/PS5…
Logitech G25/G27/G29 Bearing Housing remix from ataylor's model ataylor's model is a promising fix for the G27 housing but it requires a lot of filament and takes a while to print (almost 8hrs for my Ender 3 V3 SE). Granted that it's for…
I had an old Apple Magic Keyboard that I wanted to use for sim racing because it's so small. Therefore, I designed my own keyboard stand and now only use the mounts from Alby312. That allowed me to build my own little "racing island". No…
This enclosure is designed to house the Logitech G29 mainboard and provide clean, protected access to the pedal and shifter connections. It offers a compact and organized solution for projects where the original wheel housing is not used,…
Shifter knob mod. Using original screw to mount the adapter, long shaft and locking to prevent breaking and over-tighten. Long version could be sensitive against breaking above the threadline. Short version in use since a few years. Screw…
These extra feet make it possible to mount the Logitech G29 / G920 for a better feeling when gaming with a lower chair setting. Assembly Apply double-sided tape to the positions as shown in the picture below. left: top feet, right: bottom…
Hey there! Check out my website to see the latest products I've designed—now available for you! Don't miss out, hit the link and explore what's new! My Shop: https://buymeacoffee.com/cc3dprojects/extras My Website:…
While similar to commercial versions and other 'radius gauge' models on Printables, I designed this one because I couldn’t find an option that was parametric, offered the value range I needed, or looked aesthetically pleasing—and, of…
This racing wheel adapter with a face plate allows you to add a racing wheel to your G29, G920, and G923 while keeping your wheel looking good and protecting any of the buttons from being pressed and breaking them. The adapter itself has…
Magnets : Dimensions are 8mm x 8mm x 10mm. You can stack the magnets to achieve a total of 10mm without the need for glue. Since the magnets do not directly touch the metal, you'll need stronger magnets for this setup. Alternative to…
Stendo clamps for G29! I made these after I made myself a desk with a 30mm top that sits on a 40mm square tube frame and realizing I no longer can play my rally sims. The clamps can now clamp 80mm tall objects since I figured that's…
If U Are Modding Your Logitech It Is For You. Have A Nice Day :)
Cover for steering wheel of G29, G920, ... Cupra badge Printed in two colours with one extruder (colour change) when using gcode. Gcode files for mk3s+ and mk4 with single extruder. Happy Printing!
Simple wall mount for designed for Logitech steering wheel but probably fits other brands too. It has kind of slide system to correctly hang the wheel under desk where you can't see that well. Also you can screw the wheel onto the holder…
Tightening the nuts on your Logitech G27, G29, G920, or G923 steering wheel doesn’t have to feel like an arm-wrestling match with a gorilla. This wrench, based on the original design by magno23 (thanks for the initial work!), has been…
-Parts List: M3 Screw (atleast 16mm long) M3 Nut (can also be replaced with a threaded insert) Plastic Glue -Assembly: Put some grease on the shaft then put one half of the knob on the shaft so it slots in and can rotate freely then glue…
This is a mount to fit an Elecrow RC0505S 5" LCD screen to a Logitech G29/920. It should fit the G25/27 as well if they haven't changed the distance between the mounting clamps between models. As long as they're approx 210mm centre to…
El modelo necesita 4 tornillos de M3.5 y corona de 7mm. Está hecho para que no tengas que usar soportes. Sus dimensiones son 120x80x69mm.
changed the model so my 6x6 magnets fit
These buttons are designed for the Logitech G29 but are also compatible with the G920 sim racing steering wheel. They feature a press-fit design that’s easy to install yet simple to remove if needed. Additionally, they can be securely…
Greatly improves the feeling of the paddle shifters For the build you need: x4 6*3mm magnets x2 ≥ 24mm M4 screws CHC is better x2 M4 nut (you can always screw directly into the plastic) THE STEP FILES ARE AVAILABLE IF YOU WANT TO EDIT THE…
I made this alternative knob for the manual shift of the Logitech G29 steering wheel. To assemble, remove the top casing where the gear numbers are of the original knob and later unscrew the bolt inside. The model should fit without the…
This chock was designed as an ASG29 hangar chock but would be suitable for anything with a small ~250mm/ 10 inch wheel. It is designed to be a pair with a cord between them for easy handling. The face of the chock bends around the tyre…
This part allows the G29's pedal and power cable to be cable managed under your desk without straining the cables or permanently modifying your wheel. The cable block screws onto a custom mounting bracket which is screwed into preexisting…
Redesign of front plate for F1 wheel. Buttons are functional and center caps can be assembled easily.
Hi Internet Sim Racers! I present the Logitech 70mm Hub Adaptor "kit" with 2 versions and a Quick Release Hub Adaptor. Whats in the Pack? 1) Standard 70mm adapter puck similar to that which is very popular. 2) Stubby 70mm adapter which…
Logitech G29 , G920 , and G923 Racing Wheel Base Adapter Filament Used Spooless Red PLA+ Spooless PLA+ on Amazon Light Blue PLA Light Blue PLA on Amazon Printer Settings: Print Time: 14H 35m No Supports Print 4 pegs .25 layer height 230…
I remixed this model to have a Mitsubishi logo on it.
Angled the magnets 5° for better contact with the paddles.
Lets you fit a MTB grip as a shifter knob. Uses the original screw to secure it to the shifter shaft. It will accept any MTB bike grip that uses lockrings.
Knob adapter for G27 shifter. (Please, let me know if other shifter knob model works) This should work with G25, G29 as well, please let me know if it worked Knob Socket Dimension 17mm File is in correct position to print (see in image).…
Steering wheel cover replacement for Logitech G29. You can simply replace it with the original one by unscrewing the 6 screws.
The splitter and range are on one switch. Parts for build: USB Encoder:…
I created a wrench to tighten the Logitech G29/G920/G923 AND shifter to the table. I had problems keeping my wheel and shifter stable during races — the shifter would sometimes slide off the desk in the middle of a race. Now, with this…
description A rear cover that attaches to the bottom of the steering wheel to hide the cables and prevent them from coming loose or getting tangled. Useful if you want to keep them out of sight. compatible with: G923 G920 G29 important…
>>>Newer Altered Version Available<<< I am using Sunlu PLA+ and had to reprint the slider multiple times after just a few days. I modified the slider for increased durability and smoother movement, and I remixed the top plate for added…
Needed stuff for adapter m5*20mm screw x6 m5 nut x6
H Gate Shifter // remixed from Antonyart's H Gate Shifter // This specific H Gate Shifter can be used as an H Gate AS WELL as a Sequential Shifter with two (2) slits on either side for rubber bands. I'd recommend 25%+ infill with a…
The Final Shifter Mod… Modular sequential shifter mod for Logitech G Shifter (G29 G920 G923) and H-Pattern stiffness improvement. Only 4 M3 x 16 screws + Nuts needed. I moved the slider on top of the shifter mod to make it more versatile…
This is a modification to make the great gear shifter Logitech made to a standalone product. It's cheap and reliable, available to many and works great. The concept: There is one predominant way that has gained popularity. But there are…
A simple shifter knob mod I made for my Logitech G920 shifter that came out nicely so I decided to share :) .Using original screw to mount .Printed with 4 walls for extra strength .Only needs supports for the hole I painted out the rest…
Made it in two pieces because i didnt have a multi colour 3D printer.
The Logitech G29 pedals come with a really opinionated base. It's long, has a wire the comes straight out the back and may or may not fit where you need it to. Maybe in trying to design something for everyone, they made something that…
This model is a Mercedes faceplate logo for logitech steering wheels.
The redesigned clamp offers a similar fit to the original G29 part, but it is approximately 20mm longer and may fit slightly more easily due to reduced thickness in some areas. Despite these changes, the clamp remains sturdy during…
Circular wire guards for Logitech G29 racing wheel to extend the effective length of the wires. Should be compatible with the G920 and G923, but not tested! Do you too suffer from I-wish-these-wires-were-3cm-longer syndrome? Here's the…
Circular Stearing Wheel for: https://www.printables.com/model/378041-logitech-g29-f1-wheel Needed: 6x M3 15 mm screws (2 for attaching two halfs of wheel together) 4x M3 nuts - needed to be secured inside their cavities (glue, 3D pen …)
This Wall mount is made to hold up the Logitech G29 steering wheel. Most likely will work with other models. Printed in PETG but can be printed in other filament types. You Will need screws and possibly wall inserts to Category: Games
i tried to find adapter to use with my logitech g29 shifter and custom shift knob, i could not find it anywhere for my knob style, so i made my own design. I printed it from creality black pla on my ender 3 without supports. pla worked…
Mod for Logitech G29 , G27 , G25 , or Driving Force GT pedals by replacing the stock potentiometers with Hall effect sensors for smoother, more precise input and zero wear over time. This printable bracket makes the conversion simple and…
Just a relatively easy to print, F1-style wheel. You can assemble the parts with just glue/epoxy. Alternatively, if you want the ability to change handles more easily, you can use 4x M3 x 14 screws and 4x M3 nuts. This design was tested…
A quick release adapter for the Logitech G29 & G920 Print Settings: Material - PETG Layer height - 0,12-0,2mm Infill 12-50% Supports - Yes Additional parts needed: 6pcs M4x10 bolts 6pcs M4 Nut 1pcs bike seat post clamp 34,9mm How to use:…
This is designed to fit the small Rubbermaid recycling bin with SKU FG295573BLUE, often listed as 13 qt, 13.6 qt, 3.25 gal, 3.5 gal, or 4 gal (sold by Rubbermaid Commercial , Grainger , and others). The rim fits over the bag/liner on the…
Replacement of central part of logitecg g29 steering wheel. Perfect for SRT fans. If you need any other car brand logo let me know :)
This is quick-release adapter for the Logitech G29/G920 racing wheels. In addition to the 3 printed parts, you will need: 4 M3x16 screws and nuts (I used button head screws, but the clearances also allow socket-head). 1 Male and 1 Female…
Reupload of a popular wheel mod for Logitech G racing wheels. This includes everything you need to print it and get racing. G920 Tutorial - This is the video I used to figure out how to install the wheel. When reassembling, don't install…
If your padel shifter is broken, download this and print it. Amazing quality
The Logitech G29 clamps are not long enough to mount to the inside corner of an L desk. These are little mounts that slide under the clamps to help align and securely mount the steering wheel in the corner. You will need to print one…
If you love this, please consider tipping me, as a lot of work when into this: paypal.me/Mathewdelapa UPDATE!!! 12/05/2023 - I uploaded GTQR Adaptor, so please print that out as well! PARTS LIST 1) Vinyl Wrap (Color is your preference, I…
F1 steering wheel with ferrari details. Working selector in the middle of the steering wheel
Just some spacers for the clamp i made because the old ones broke. print with 35-45% infill with gyroid. PLA might work but i used PETG.
This is compatible with the magnet remix of this shifter gate for the g29. the file should be printed as is 15-20%infill Can be used as an E-break or sequential shifter. To assemble, remove current shifter knob (many models available that…
PG29 threaded blind stuffing to close unused PG29-openings in housings. [1] Thread type: PG thread [2] Diameters for PG29 opening: a) threaded hole: 35.5mm / PG thread b) drill hole without thread: 37.0mm [3] Sealing: An optional…
PG29 threaded blind stuffing to close unused PG29-openings in housings. Adapter for (1-3)xPG7 cable glands for smaller diameter wires. Unused PG7-openings can be closed with PG7 blind stuffings with PG7-thread. [1] Thread types: PG thread…
Logitech BMW wheel emblem for replacement/style. I would recommend 90% infill for maximum quality. will make more car logos in the future Please like and comment to tell me problems and tips so I can improve to your Feedback😁 UPDATE:…
Reccomend printing in PETG. thats what i used. Reccomend printing SOLID . i didnt do any infill. You WILL need either a drill, or a dremmel for some of the holes on this. requires a little bit of post-processing, but its not bad. gotta…
PG29 threaded blind stuffing to close unused PG29-openings in housings. Adapter for 1xPG9 cable gland for smaller diameter wires. Unused PG9-openings can be closed with PG9 blind stuffing with PG9-thread. [1] Thread types: PG thread…
PG29 threaded blind stuffing to close unused PG29-openings in housings. Adapter for 1xPG9 cable gland for smaller diameter wires. Unused PG9-openings can be closed with PG9 blind stuffing with PG9-thread. [1] Thread types: PG thread…
It uses M3(20mm) screws, I recommend using at least 4. It mounts to a bracket made by stingray127 https://www.printables.com/model/364829-playseat-challenge-diy-hardpoint
[CZ] Kryt středu volantu Logitech G29 / G920 / G923 – 15+ log Vyměňte originální středový kryt svého volantu Logitech za vlastní design. Model je kompatibilní s volanty Logitech G29, G920 a G923 a obsahuje více než 15 různých log…
[CZ] Kryt středu volantu Logitech G29 / G920 / G923 – 15+ log Vyměňte originální středový kryt svého volantu Logitech za vlastní design. Model je kompatibilní s volanty Logitech G29, G920 a G923 a obsahuje více než 15 různých log…
This is my version of the gears for replacing the potentiometers of the Logitech G29 (should be the same for G25, G29 and G920 but I can't guarantee it, comment if it works for you!), with generic dirty cheap Aliexpress ones (WH148) as…
A shifter mount for the Vevor Wheelstand for Logitech G25, G27, G29, G920, tested with the Logitech Driving Force shifter. but should also work for other shifters with table clamps, alternatively the model can be edited to punch some…
Extensions for L2 and R2 buttons of the G29. Original screws can be used, but it's better to replace them with slightly longer ones (~5mm). I printed them 55° tilted so they don't need that much support
Here is a 3D model of a Logitech G29/G920 BMW front plate designed to enhance the look of the Logitech steering wheel and improve the sim racing experience.
Just a relatively easy to print, F1-style wheel. You can assemble the parts with just glue/epoxy. Alternatively, if you want the ability to change handles more easily, you can use 4x M3 x 14 screws and 4x M3 nuts. This design was tested…
Print the whole kit from the original model and give him some love for his work, then print my parts and assemble as intended. You can adjust the shims for your own phone by taking some quick measurements, and I recommend a dab or two of…
🔁 Compatibility The 3D prints can be used on any Logitech G29 , Logitech G920 and Logitech G923 . The only print that's specific to a Logitech variant, is the lower bezel , which at the moment is available only for the G29, or PS4/PS5…
Logitech G25/G27/G29 Bearing Housing remix from ataylor's model ataylor's model is a promising fix for the G27 housing but it requires a lot of filament and takes a while to print (almost 8hrs for my Ender 3 V3 SE). Granted that it's for…
Hey! I designed a center cap with a CUPRA logo for the Logitech G29 / G920 steering wheel. I’ve uploaded .step files so you can easily replace the emblem with any logo you like. I printed the BASE and TOP CAP with 0.2mm layer, CROWN and…
I had an old Apple Magic Keyboard that I wanted to use for sim racing because it's so small. Therefore, I designed my own keyboard stand and now only use the mounts from Alby312. That allowed me to build my own little "racing island". No…
A handbrake add on for a Logitech G29/G920 "Driving Force Shifter" that mounts underneath the shifter. I made this because the cheap metal frame I had for my steering wheel / pedal / shifter set up did not have any additional space to add…
4xM3 nuts and 4xM3x6mm bolts (best cap head socket screws) needed for assembly. After few test I found extenders wobbly, maybe trying print it with PLA will solve the problem. I'm still working on better version with supports to make it…
