Logitech Shifter mod, Sequential, Extensions, Knobs, H-Pattern Stiffener for g29, g920, g27, g923
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This will make your shifter stiffer, look better, have real gates, and you can also make it a sequential shifter.
- Rating
- 4.667 / 5
- Likes
- 159
- Downloads
- 774
- Makes
- 7
- Views
- 13,361
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
I wanted a shifter mod that looked good, stiffened up the shifter, and could also be transformed into a sequential shifter. I took a few of the other designs (links below) on thingiverse and molded it into this. I printed it but it needed quite a bit of post processing to work correctly, I redesigned the bottom and the top to use #4 machine screws and adjusted the tolerances, I have not printed it but it should be pretty good with minimal sanding.
UPDATE: I made another one of these and after sanding the bottom and slider extensively, I decided to rework these two parts. These should allow the slider to be quite a bit more durable while eliminating some more sanding. Try it and let me know.
These were the 2 items I used to remix.
https://www.thingiverse.com/thing:4302821
https://www.thingiverse.com/thing:4419194
Tips
-Print the slider in petg or similar filament, nylon would work best
-Everything that has over hangs needs supports
-Either flip the extension or use a brim to help adhesion
Print Settings