Counting matching models…
Cupholder for simracing rig. Holes for M8 screws. Inspired by https://www.thingiverse.com/thing:4888859 but optimized for 3d printing, with less overhangs - No supports needed.
This simple holder will clip into a 4080 groove and will help support any device. I use it to keep the PSU in place (check photo) and the larger one to keep the portable keyboard.
Taking inspiration from the flag indicator by @misterT, I did some modifications in order to accomodate a pro-micro with type-c to modernize it a bit since nano uses micro usb.. Do let me know if you come across issues. The pro-micro I'm…
The provided 3MF File is prepared with all my modifications. The Back Part needs Supports for Printing After Printing the Back Part, you need to punch through the 2layer supports for the M8 screw (if you want to use this Fixing Method) I…
ok so its rugged but simple solution for the problem that i could not find any normal shifter base for my race sim MAIN PRINT INSTRUCTIONS 1. use tough plastic types PLA may be not enough ( i used ASA) 2. 3 wall min ( i used 4 ) 3. infill…
This is the mouse I bought Nulea M501 Kabellose Trackball Maus, Wiederaufladbare Ergonomische Maus, Präzises und Reibungsloses Tracking, 3-Geräte-Verbindung , Kompatibel für Mac, Windows.: Amazon.de: Computer & Zubehör 2 pieces m8 hammer…
The core philosophy behind this design is complete modularity . Don’t want a specific screen? Swap it out. Want your windsim fans on the far edges? Just snap them in. Each module can be printed separately and linked together to form a…
Verbindungsadapter von 30x30 Vierkantrohrgestell auf 25x25. Damit das Gestell für die Sitzkonsole zum Lenradhalterung nicht aufeinader schleift.
I create this alternative pedal plates for DC Simracing DC-3 pedals, bigger and softer than the original ones, giving the posibility to use it without shoes. I printed it on PLA but i'm sure that PETG it's better for this use. With PLA I…
I recreated these shifters using photos and datasheets provided by Cosworth. They originally are part of the entire CCW MK3 wheel design, but as that won't be finished for some time, I decided to release them as a standalone design so…
Fuerte bandeja para ratón, muy estable. Relleno del 20%. Medida agujeros 6mm. Perfecta para cualquier perfilería de Aluminio. Sin Soportes. Es mi primer diseño, se agradece cualquiera opinión de mejora, Gracias.
Mounting bracket for simracing to isolate vibrations. Print inside from TPU. M8 screw hole in the middle.
Passe cable 1/4 de tour ajusté pour profilé rainure 8mm 3 tailles S, M ou L S et M avec entaille 3mm, L avec entaille 4mm PETG ou PLA, 3 périmètres 30% remplissage, pas de bordure ni support Bonus ; une petite boite qui tient sans vis…
Brakes for your office chair to put under the wheels so you don't slide away whilst sim racing. Glue some kind of rubber mat on the underside of the print so it grips the floor better. You want to print at least to of these for the chair…
Been using this for a while now. Printed them out of ABS. Sure there are other ways to mount this but this worked fine for me. I've made them this tall so a power strip can still be mounted underneath the rig. Hardware needed per mount:…
I have used this adapter in order to mount wheel with bolt pattern 6x74mm to Fanatec podium hub which has bolt pattern 6x70. Print settings: 4 wall 5 bottom and top layers 40% infill PLA You will also need M5 rutex inserts (Nardi to…
This print allows to you run cables (power, USB, audio, ...) on your profile and keep them hidden. Both versions clip onto the rig slots, no hardware needed. It is very generous in space as I had a lot of cables to run. You can print…
I create this alternative pedal plates for DC Simracing DC-3 pedals, bigger and softer than the original ones, giving the posibility to use it without shoes. I printed it on PLA but i'm sure that PETG it's better for this use. With PLA I…
its a model to make a steering wheel. It is uncomplete, missing details like screw holes, back cover, paddle shifters...
Project : https://simracing-pc.de/en/2024/11/06/diy-project-steering-wheel-with-round-vocore-3-4-inch-screen/ Web : https://simracing-pc.de Discord : https://discord.gg/V5ZKUj3weJ Parts needed: VoCore Screen 3.4 inch (MPRO) M3x12MM…
Made a few improvements to the original design. Read below. Don't mind the warping of the middle part of the flag, I forgot to put brims when printing and it warped 😁 In the last photo you can see the old model and how there is a gap on X…
This is a project for a direct-drive sim racing steering wheel base enclosure using a hoverboard motor and an ODESC Mini. This is my first project using FreeCAD, and I essentially learned it during this project. The project is mostly…
This is a magnetic paddle shift for diy simracing wheels. Hardware needed: 1x 10x3mm round magnet 1x 12mm round magnet (spessor is your choice can be 3mm or 5mm for more force) 2x 5x4.5mm m3 heat insert (you can modify the lever in order…
Project: DE: https://simracing-pc.de/2024/12/18/diy-projekt-simracing-spotter-lights-simhub-arduino-mit-30-leds/ EN: https://simracing-pc.de/en/2024/12/18/diy-project-simracing-spotter-lights-simhub-arduino-with-30-leds/ Web:…
Designed for the pro series of button boxes with the 90*80 drill pattern. I'm very new to 3d printing (and even newer to modelling) so I've kept the plate very simple. Printed on an A1 mini using 25% infill to try and minimize any flex.…
Can be mounted directly to your rig, using m8 bolts on the back. Everything is designed for simple print and easy installation. Included the fusion file, so you can edit to your likes.
This is a sim racing steering wheel that can handle 16 buttons, and you can choose to mount two encoders. This is the second iteration I've made for this project, and it has been working very well for a year on a direct drive (DD)…
It is Housing for a Gear Indicator for Simracing with 6 adressable RGB LEDs. It has a slot for a Pro Micro Controller and uses a normal MAX7219 8 x 8 Dot Matrix Display. The bracket is suitable for the Moza Racing Bases. Use Simhub for…
Update, Dezember 2025 Thanks to @ gerritkpunkt for edditing the Case to fit the universal Magnetic Mount https://makerworld.com/de/models/643295-universal-magnetic-mount-for-vi-ddus#profileId-2117855 DDU for your 5" Vocore Screen What you…
Printed with 6 walls/perimeters (might be overkill) and %40 gyroid infill. (or 30 idrc.). My edges creeped while printing so yours might not lift while shifting.
Lista de materiales y código de Arduino en la descripción del vídeo de YouTube citado en Summary Recomiendo imprimir todo en PETG, y si podéis el BrazoLeva en ABS. De todas formas yo tengo todo en PETG y ningún problema, pero si es cierto…
Should fit most "8020" rigs, I think. But definately works with: Simlab GT1 Evo https://sim-lab.eu/en-us/products/gt1-evo-sim-racing-cockpit-1 Prints as 2 parts: top section to get a smooth surface for mouse to glide on main body: print…
Added holes in back DDU so screen can fit on the front of Moza R9/R12 base. Utilized 2x M6x20 Hex screws.
After I switched pedals for CSPv3 I had my heel touching the profile which is too uncomfortable,so i created this simple design and printed it with tpu. Use high infill for the slot part ~30%,and 7-15% for the flat part. Part is 5cm…
Made a small change to the original model, brought the holes a bit inwards and made the middle connect with a dovetail to save 4 screws and nuts in total. Printed in Creality PETg with 15% Grid infill and 3 wall loops for a bit added…
To print Right bracket just use miror function of your slicer.
Raspberry Pi + Simhub based dash designed for the Elephoont fanatec CS DD FFBeast housing . This may also work with the official fanatec CS DD but I can't guarantee it's functionality. The design includes a safe shutdown button on the…
I recreated these shifters using photos and datasheets provided by Cosworth. They originally are part of the entire CCW MK3 wheel design, but as that won't be finished for some time, I decided to release them as a standalone design so…
The spacing and curvature of the LEDs didn't allow for an uncut LED strip so it's a more complex build. BOM: M3 heatinserts M5 heatinserts (optional) Nextion 4.3 display Pro Micro ATmega32U4 M8 series cable and socket WS2812B PCB LEDs 2mm…
Wheel Stopper Recommended to print with PETG, but PLA should also work. ⌀75 mm diameter 55 mm width Rubber Feet Print with TPU or TPE. ⌀20 mm diameter 6 mm width
Button Box for Sim Racing. ------------Type A-------------- 9 Buttons (red and black) 12mm 2 LED buttons (red) 12mm Start Stop ------------Type B-------------- 9 Buttons (red and black) 12mm 2 LED buttons (red) 12mm Ignition switch…
A sequential shifter for simracing. Note that, except for the printed parts which are shared here for free, you will also need 2x spring plungers M20 (thread), of length L = 30 mm. I bought mine here , (see figure 4 for spring plunger…
Vocore 5in DDU for VRS base with either a direct mount or extension for setups like mine where the wheel base is behind the monitor. The extension can easily be changed via the parameters panel from the favorited parameter. Size is…
Beltguide to avoid sharp edges and to protect the seat and its plastic cover. Two versions to compensate for the angle of the hole. On the Picture is a Bucketseat used from GT-Omega. Plasticcover of my seat has an thickness of 21mm.
Hello ! I always wanted to create a windsim for simracing games, but never wanted to pay a steep or expensive price. I recently got a 3D Printer so I designed a custom mount and created one. Materials : ALL THESE MATERIALS BELOW ARE…
Project main site: https://www.thingiverse.com/thing:4891321 This is remix of Formula B1 - (Sim racing) steering wheel for Thrustmaster T300 RS wheel base. With other wheel mount or quick-release, this wheel could be also used for another…
Print Settings: Layer height: 0.2 mm Infill: 15% Supports: Not needed Printed on a Prusa MK4S + MMU3 using Prusament Galaxy Black and Pearl White. The STLs include holes for 8 mm × 2 mm magnets in the corners. The cover has a tight fit,…
Disclaimer: This is a rally/drift steering wheel made for simracing. D o not use this in a real car. The shape and dimensions of the wheel are based on the sparco R383 but it is not a perfect replica. INTRODUCTION This steering wheel is…
This is a shifter knob design I made to screw onto an 8mm threaded rod (you'll need to insert an M8 nut during printing). You can adapt the model to fit other types of fixations (the STEP files are available for download.) I personally…
Hello everyone. I designed a sim racing handbrake for your rigs that uses alumium extrusions as a base and handle. The rest of the parts are printed in PLA or any other material with more strength (I tried with PLA and it performs well).…
BACKGROUND Had no place to put keyboard, so designed a holder that slides into v-slot. Works just fine. Tested and adjusted for Omega V-slot profiles, but as profiles are standardized, it should fit any V-slot. CONTENT Design consists of…
F1 wheel for simracing, it using 6x70 mounting so can be installed on any base with adapter, all you need is m4x20 screws, this wheel weights ~ 350g that making it super lightweight even with adaper but still can work with powerful bases,…
Fuerte bandeja para ratón, muy estable. Relleno del 20%. Medida agujeros 6mm. Perfecta para cualquier perfilería de Aluminio. Sin Soportes. Es mi primer diseño, se agradece cualquiera opinión de mejora, Gracias.
Print Instructions Material: PLA/PETG/HDGlass (Clear, See Through) Layer height: 0.2 mm or 0.15 mm Perimeters: 2 or 3 Infill: 15 % Supports: No
Because of a lack of a proper heel rest / heel stop on the Ultimate+ pedal base I decided to create some heel cups (inspired by some screenshots of F1 pedals) myself. It really helps keeping your foot in place in a good and constant…
Simracing 100mm spacer with 2 bolt patters: 70mm and 60mm. I used it in an ffbeast build. M5 Bolts for 70mm M4 Bolts for 60mm is compatible with Moza / Simagic QR
Mounting bracket for simracing to isolate vibrations. Print inside from TPU. M8 screw hole in the middle.
Passe cable 1/4 de tour ajusté pour profilé rainure 8mm 3 tailles S, M ou L S et M avec entaille 3mm, L avec entaille 4mm PETG ou PLA, 3 périmètres 30% remplissage, pas de bordure ni support Bonus ; une petite boite qui tient sans vis…
This remix replaces the original rear mounting holes with compatibility for the Universal Magnetic Mount ( https://makerworld.com/en/models/643295-universal-magnetic-mount-for-vi-ddus#profileId-2117855 ) . The design removes one M3…
Deckel wird mit Schrauben M3 angeschraubt 8x8 LED Matrix über Arduino über Simhub angesteuert Befestigung für 45er oder 90er Aluprofil
Halter für 4 Zeilen Display Angesteuert über Arduino und Simhub Befestigung mit Schrauben M3 für den Deckel Halter für 45er oder 90er Aluprofil 45° Abgewinkelt
Bracket for magnetic paddle shifters and LED strip with RJ9 header for coiled cable connection. 6x70 M5 holes pattern. Paddle shifters from: https://www.diy-sim.com/sim-projects/sim-gear/shifters/item/magnetic-paddle-shifter-v4 Paddles:…
Since I wanted my own mount for my Stream Deck Module 15 and a dashboard for my steering wheel, I created this mount. There is a small recess on the back of the housing for a zip tie so that a USB hub or cables can be neatly attached.…
The models conect to the pre existing holes on the cockpit itself, i made them to avoid paying the high prices of original parts, that are also out of stock in my location right now. I had to make reinforcements to the keyboard support…
Brakes for your office chair to put under the wheels so you don't slide away whilst sim racing. Glue some kind of rubber mat on the underside of the print so it grips the floor better. You want to print at least to of these for the chair…
This is a vertical mount I designed for my Rapoo K2600 Keyboard. It fits the keyboard tightly so that the keys don't rattle on vibrations. I've mounted it with two M6x12 bolts and T-Nuts to my 4040 profile. The screw heads need to be…
Been using this for a while now. Printed them out of ABS. Sure there are other ways to mount this but this worked fine for me. I've made them this tall so a power strip can still be mounted underneath the rig. Hardware needed per mount:…
I have used this adapter in order to mount wheel with bolt pattern 6x74mm to Fanatec podium hub which has bolt pattern 6x70. Print settings: 4 wall 5 bottom and top layers 40% infill PLA You will also need M5 rutex inserts (Nardi to…
a simple monodirectional lock for the humanscale liberty's wheels , useful when you want to press pedals and not go to Narnia. Just place it behind the wheels, in betwheen the two wheels, pointing towards the pedals. If anyone likes this,…
Needed to mount an existing steering 74mm spaced wheel that i had in a 70mm QR hub, so i made this. You need to pause the print at Z=30 and install 6 M5 nuts on the holes, then resume the print. I think i printed this with 6 perimeters,…
Upgrade your sim racing rig with these ergonomic, lightweight shifter paddles. Designed with a curved profile for a comfortable reach and a six-hole "lightening" pattern, these paddles offer a satisfying tactile response and a high-end…
Williams F1 Steering Wheel 3D Model: Sim Racing DIY Project *Electronic files NOT INCLUDED Carbon fibre parts: https://geedsrdesigns.etsy.com/listing/1888815782/carbon-fibre-set-for-williams-f1 PCB:…
Custom Sim Racing Button Box Take full control of your race with this handcrafted USB Sim Racing Button Box. Designed for serious sim racers, this controller provides quick and intuitive access to essential in-game functions without the…
Welcome! This project is opensource and I upload all cad files. You can upgrade code or print files to make it fit your parts. You can make CUSTOM HANDBRAKE LEVER. I made it with a 14x3 trapezoidal thread, so you can make it longer or…
160x50x100 dimensions. 5mm thick bottom. M8 holes in 2x3 40 mm pattern for mounting options on aluminium rigs. Front side has larger holes for access with a screw driver. Recommend using lower profile M8 bolts like button heads. Pro tip:…
Printed with PLA, 0.2 mm layers, 30 % gyroid infil. Holes are M8 spaced in 20 mm pattern to fit standard aluminium profiles. Use holes 1, 3 and 5 for odd amount of channels on the aluminium profile (4040, 12040) and holes 2 and 4 for even…
Printed with PLA, 0.2 mm layer, 30 % gyroid infill. Supports needed for the top. Hole is M8. The part fits both sides while allowing the usage of the front face usb port.
Printed with PLA, 0.2 mm layer, 30 % gyroid infill. Supports needed for the top. Holes are M8, spaced 20 mm apart. Use middle for single/odd channeled profiles (4040, 12040) and use the side ones for even channeled profiles (8040). The…
Inspired by https://makerworld.com/en/models/1293206-ddu-under-monitor-mount#profileId-1323808 but remodelled from ground up for: A nut capture for M5 nuts Shorted struts to get the DDU closer to the monitor Flanged connection between…
Рекомендации Лучший вариант сборки, это вставить элемент 5 в элемент 4, ну а потом надеть в элемент 1 ( чтобы получить максимальную прочную конструкцию. Либо использовать вариант сборки через элементы 6 и 7. Recommendations The best…
I designed this Tablet holder for my Thrustmaster T300. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.3 Infill: 10% Filament: Wanhhao PLA Black Notes: Print both seperate and glue together.…
Hi! This is the first design I'm uploading here. I originally didn't even plan on publishing a polished version of it but hey I guess it could help some people out there getting into the (diy) simracing hobby. The concept is simple, it's…
Made these to stop my office chair from rolling away while simracing. To know if these fit for you, slide a regular AA battery through the gap between the wheels, if it fits through and the outer diameter of your wheels are 50mm, these…
This “Yet Another Smartphone Holder” is supported by sliding and fitting over the screws, not being screwed in. This allows for a more shallow profile and therefore a smaller holder.
Clip for 76mm belts to loop the excessive belt length on your simrig, so keep in mind it is not for fixing your belt to your rig it is useful when you used the normal belt shortener for fixing the belt to the stepper lever. V2: added some…
Head over to the discord server if you want to discuss this model: https://discord.gg/aK2JKpwT4m This is meant to be done in sheet metal, (.119″ or 3.02mm) steel. The covers are meant to be customized and 3d printed. I also added the…
Steering wheel based on Ferrari 488 GT3 design GitHub Repository: https://github.com/Alby312/GT3-488-Wheel Wheel of 30cm of diameter, based on real wheel of Ferrari 488 GT3 with 12 push button 2 rotary encoder and 2 magnetic paddle shift.…
Ceci s'adresse aux constructeurs de volants Simracing AVERTISSEMENT : CECI IMPLIQUE L'ÉLECTRICITÉ. TOUJOURS VÉRIFIER DEUX FOIS LA POLARITÉ ET S'ASSURER QUE LES CONNEXIONS SONT SOLIDES ET SÉCURISÉES. Un boîtier de dérivation ALIMENTÉ pour…
M5 screws and M5 nuts are required for assembly And USB 140 fan/PWM-USB governor
Added version 2.0 that I think looks better and also lets you set it closer to the pedal. I just printed in PLA and they work perfectly for me, but any material should work. Just make sure you don't tighten too hard. If you find you're…
Feel free to remix - you could add a part that goes into one of the holes by the plate edge for more stability. I just got lazy and never added that. Doesn't move for me anyway.
Dashboard shell for iPhone 5S with 2 type of mounting, Fanatec CSl wheels and DD SimCube 2 Pro. The software I use is SimHub There is also the design for the iPhone4 that I have been using before Category: DIY
iPhone 4 support for Fanatec CLS elite If you have an old iPhone 4 getting dust, you can bring it back to life to something useful in SimRacing. I use SimHub http://www.simhubdash.com/ to connect it to any driving simulator software and…
Material: ABS recommended Perimeters: 4 Infill: 40-45% Solid layers: Top & Bottom 5/4
2024-08-19 Update Also see this model . ----- As snapoffs are epensive I designed this adapter and extension for my Fanatec BMW GT2 wheel to be mounted on my VRS DirectForce Pro wheelbase. 52mm (Fanatec) PCD to 70mm PCD adapter Extension…
Smartphone Holder in a two part design. Needs 3 M3x10 DIN912 Screws and 3 M3x4,2x5 heatset inserts to assemble. Printed mine in black PLA.
Additional parts needed: 1x Switch TRU COMPONENTS TC-9219040 (https://www.conrad.de/de/p/tru-components-not-aus-schalter-3-a-1-oeffner-ip65-1-st-2304760.html?refresh=true) 4x Screw Din 912 M3x30 4x Nut Din 934 M3 2x Screw ISO 7380-10 M4 x…
Additionial parts needed (for 1 pc) 2x 10mm Coupling (orange damper part is inserted on each side): https://de.aliexpress.com/item/33009503518.html?spm=a2g0o.order_list.order_list_main.53.71335c5f1GWFmi&gatewayAdapt=glo2deu 1x 4mm rod…
Print two of these for the back of a profile Sim Rig. It has two M8 holes in the center of each tail pipe to bolt up to the profile with. Print instructions Using Jet Black and then switching over to Pearl Mouse.
![Center console dashboard for SimRacing (Sheet metal + 3d printing) [V1]](https://media.printables.com/media/prints/396221/images/4798152_d6c5ef38-ca90-4960-8837-3bcc3c551eca_bcec7736-5641-45dd-b171-41597c885a89/20230929_182954.jpg)
