SIMRACING seat shifter base
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
solution for all those sim seats that don't have normal shifter base
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 24
- Makes
- 0
- Views
- 473
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Public Domain
ok so its rugged but simple solution for the problem that i could not find any normal shifter base for my race sim
MAIN PRINT INSTRUCTIONS
1. use tough plastic types PLA may be not enough ( i used ASA)
2. 3 wall min ( i used 4 )
3. infill 30% min
ASSEMBLY
1. use all the pre made inserts holes and assemble them
(you should have 4 of them on "box1" and another 4 on “box2”)
2. "box1" use 4 m5 screws with nuts and washers to connect it to ur seat
(should drill the holes before )
3. then assemble “box1” with “box2” using more screws
4. and at last connect "box3" to "box 2" with the same method
from my usage its holds firm but it mostly depends on ur print settings and assembly