1 / 4
5 Zoll Simracing Dash - DDU Vocore Screen — image 1
1 / 4

5 Zoll Simracing Dash - DDU Vocore Screen

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Housing for Vocore Screen 5 Zoll with LED stripes

Rating
5 / 5
Likes
53
Downloads
257
Makes
2
Views
2,251
Reviews
3

Updated at source:

Model information

Category
Computers
License
Creative Commons — Attribution — Noncommercial — Share Alike

Update, Dezember 2025

Thanks to @gerritkpunkt

for edditing the Case to fit the universal Magnetic Mount   https://makerworld.com/de/models/643295-universal-magnetic-mount-for-vi-ddus#profileId-2117855

DDU for your 5" Vocore Screen

 

What you need.

 

As usual, if you have any question, need some changes or got some ideas, let me know and post a make :)  

 

Print all parts in the color you want, except the reflectors for the LED.  You should print the closed side in white and the rest in black to prevent bleed through.

For beste effekt, print the Frontplane laying front down. You could use some carbon printplate etc.

 

First, you should bring in the thread inserts and wire the LED / Arduino in the Case.

You need 5 LED on each side an 16 on top.  You can center the LED strips with these reflectores above.   Take note, left and right is not symetrical due to the assymetric Vocore

Place the LED Stripes and Arduino in the case and lock the Arduino in place with the lid

 

 

Afterwards you could wire the Vocore with the external USB.  Screw the external USB onto the lid of the arduino and place tho vocore within the case.

 

 

Frontmounting,  place the LED top decals front the back in the topframe. You can use some glue, but it should hold up good enough.  Bring the topframe onto the case, place two m3 countersunk screws and you are good to go

 

 

 

 

 

 

Tags