Search results: led

batman logo led wall light

batman logo led wall light

Housing for Simple Handled Thermal Imager

The SHTI (Simple Handled Thermal Imager) found on Amazon HERE (not affiliated, I don't make money from this link) comes as a bare circuit board. I made a basic housing to protect it. It includes an optional lens guard that can be glued…

V6 Can Cooler (Air cooled and standard heads)

A simple v6 cooler. Can hold a can in each “cylinder” and one in the ice chamber. Plenty of space in the middle for sandwiches, and about 7lbs of ice. I designed a V8 version for my dad but it could only use narrow cans to fit on my…

Sleds feet for Accu-Tac SR5 bipod clone

Those bipod sled feet are designed for a chinese clone of Accu-Tac SR5 QD bipod. After printing, you need to tap the screw hole with M5-sized tap. Model made with Blender (with CAD Sketcher addon)

LED Filament Display

3D recreation of the Wisconsin Electric Machines and Power Electronics Consortium (WEMPEC) logo: wempec.wisc.edu I used an air compressor nozzle and braided fishing line to pull the LED Filament and wire(s) through the hollow channels.…

The HomeCube - LED Strip Wall Tightening Wedge

This LED-strip wall tightening wedge fits into the Homecube profile and can be used for illumination of the HomeCube. It is necessary to use wall plates which are 1mm thinner than the aluminium profile slot. I used profiles with 5mm slot…

Giant Smart LED

FInd more Info on Github: https://github.com/blinkyparts/SmartLED

Roller Back Scratchers, knurled foot roller, tactile sensory tools - three choices

Three knurls to choose from. The spiky one is part torture device, watch out! Cats seem to like it too!

Led guide

A led guide, to use in shelves, like the example photo. Esay to print and easy to use. Enjoy!

Angled Govee LED Light Strip Accent Lighting Mount With Holes for Securing Down

I designed this for my Govee LED Light Strips, so I can easily cast the light upwards towards the wall at an angle for some accent lighting. There are holes equally spaced apart for securing to a surface via screws or nails. The strips…

Lantern style LED lamp

LED lamp inspired by chinese laterns Bottom part has screw lid and space for electronics - I used ESP32 with WLED and 4 AA batteries. The LED strip is placed inside on the short walls at the bottom. Insert A4 paper sheet as a lampshade…

Soporte para luz led impresora Ender3 v3 KE

Imprimir con 100% de relleno. Altura de capa 0,16 para mejor acabado. Color negro para que quede mejor en la impresora 3D.

2004-2010 Hyundai Dust Cap for LED lights

This is a replacement headlight dust cap for hyundai car.

Bambu Lab X1 LED light frame with support for AMS

I've completed the LED lighting frame published by Daniel (thanks to him) with a support for AMS that allows you to remove the glass cover without removing AMS. This allows efficient heat dissipation when printing PLA and other materials…

LED Light Bracket with Tightening Bolt

Originally design as a Bracket to hold long LED lights I bought online under a shelf, but can be used for various things. It slips over a shelf and it has a tightening screw to hold item inside in place. It was design to fit shelves 16mm…

Single Load Block for Angled Talon Magwell for Kirin

Converts the Kirin angled talon magwell (from Shellington Labs) to be single dart loading. In prep for a no-mag event, I found I didn't have any old-school blasters at the right FPS. There's a single load mag block for the SLAB and that…

LED Cat ear Headband

The Case and Lid inlay combo is capable of holding a very small WS2812 LED Strip. The Other inlay can hold a 5mm RGB LED. 15% Infill minimal Was used in this Workshop:…

Transtibial (below-knee) prosthetic (single-walled) sockets

Hello! Today, I am uploading some of the generically rendered transtibial prosthetic socket models I had made back in the day. These are produced and provided for EDUCATIONAL purposes only. They are NOT/NOT/NOT meant to be printed for…

Transfemoral (above-knee) prosthetic (single-walled) sockets

Hello! I am uploading some generically rendered transfemoral prosthetic socket models I had made back in the day. These are (-yes,- a little low res and -I know- they could use a little clean up) produced and provided for EDUCATIONAL…

Arcade For Switch Mk1 and Oled With Buttons Board

Arcade For Switch Mk1 and Oled With Buttons Board /!\ The plate 4 is for the non Oled version /!\ Print on place , 15% infill , no supports required. Add with Board Buttons Please clean your Bed thoroughly and check that it fits properly.…

Vented LED bulb shroud

This is a shroud to cut down on glare from a hanging LED that's not covered by a shroud/reflector already. This is designed around the Amazon Basics 60 watt equivalent LED bulb. You should be able to scale in your slicer for larger LED…

Voron 0.2 LED COB bar

There are already so many great options for mounting LEDs to our VORONs, however none of them were quite what I wanted, they either were o not much of an angle downwards or were designed to be mounted under the y carriage meaning I would…

Nintendo Switch joy adapter (with LED holes)

I brought Mobapad joycon which do not include the adapter with it. So I create my own that not too wide when assembly with the Mobapad. Along the designing process I found that the dimension of sliding rail is different than original one…

diffusor for Prusa LED-Light Rail

diffusor for the printed Prusa LED-Light Rail from Lord_Syrus: https://www.printables.com/model/132588-u-channel-for-sethbons-led-prusa-light-bar print in white PLA and attach with glue

45 Degree LED Aluminum edgeless Profile Support

This support is designed for the edgeless aluminium LED profile. These profiles were only shipped with 2 supports per piece, so they wouldn't be enough if I had to cut them (the profiles). Not finding them available to buy separately, I…

Modular Profile for LED-Strip

This is a Modular LED-Strip Profile. It fits Philips Hue LED Strips. It is not intended to be used with high-Power Led Strips due to the Heat they can produce which may cause Damage to the LED-Profile and also to the LED-Strip. You will…

Škrabka na led, ICE Scraper

Škrabka na led s odhazovačem , ICE Scraper with spoiler

mk3 Subaru Forester SK Angled Tweeter Bracket Dash (Midrange) S2S69c recessed

a steeper angled part to improve the directionality of the tweeters, with the whole thing recessed into the recess of the car to minimise how much room they take up. my print was done with PETG in matt black, using tree supports in prusa…

GOTHIC LANTERN WITH LED LIGHT AND CHAIN

Taking the things GOTHIC LANTERN https://www.thingiverse.com/thing:2395716 and CHAIN GENERATOR https://www.thingiverse.com/thing:28405 I built a complete lamp, by adding a new thing for base and leds light, that is connected to 220Vac…

ANGLED LEGO Bricks

NEW RELEASE !!! All angles included 15° 30° 45° 60° 75 90° Step files are added in case of tollerance issues Leave a comment if you want/need adjustments

3D PRINTER 3D PRINTED WITH PET RECYCLED FILAMENT ( BEARING SLIDES )

Rainbow LED Anjuna Logo v2

I wanted to take a version of my rainbow chasing LED Anjuna logo to Anjunadeep Open Air at Red Rocks (aka the Anjunadeep Blizzard of 2024 ☃). Red Rocks doesn't allow totems, so I couldn't incorporate the electronics & battery into a…

Christmas heart LED

making a series of christmas deco If you have proposals for addon or other please leave a comment and if you like my work please leave a like :-)

Hera LED stick holder for Prusa MK4

Hera LED stick holder

Unicorn Lamp led - Lampe led licorne

J'ai dessiné sous Fusion 360 cette lampe licorne pour ma nièce. Je vous mets en PJ le modèle sans le prénom . Pour la licorne je me suis basée sur cette image Il faut imprimer les différentes couleurs de la crinière de la licorne…

RGB Led light for Anycubic i3 Mega

Hey everyone! 🌟 I’ve got a new model for you today that’s designed to make your workspace more practical and stylish. This light holder is perfect for LED strips from IKEA and fits perfectly with the Anycubic i3 Mega printer. Not only…

Soap Dish Concrete-Filled

This soap dish is filled with concrete to make it heavier. This makes it feel more high-grade and keeps it from sliding away. No support needed.

Skadis LED Strip holder

Manual: https://tynick.com/blog/11-03-2019/getting-started-with-wled-on-esp8266/?utm_content=cmp-true (solder wires to the top of pins)

LEDeez v2.0 Case

This is a complete case for the Wantmoore.tech LEDeez v2.0 pixel controller. The lid is a friction fit design. It's relatively thin - so should print with “all walls/top shell/bottom shell" and be plenty strong. .2mm layer height 4 wall…

Simple Christmas tree - Led tealight

Tree for LED Tealight. Printed in Vase mode 120mm height - layer 0,16 180mm height - layer 0,2

Ioniq 5 - Battery Level Led Cache

Hide bright led when charge door is open. Can stay in place when door is closed.

Charging station with LED light for the bedside table

A charging station for a Samsung A34 (another cable from amazon), a Garmin Vivoactive 5 (Orginal cable) and the Galaxy Buds 2 (Orginal cable). Since I don't have a bedside lamp, I added an LED strip to the model. Since this configuration…

Conector tira led 8mm de dos pines

Conector tira led 8mm de dos pines

Rostock Delta LED strip holder

Small LED strip holder for Rostock 301 delta printer with 10mm rods at 60mm distance. You will need 64mm length of 15mm width aluminum led extrusion and piece of any 12/24v led strip.

Lampshade for "Hokan" LED gooseneck lamps

I have a few of these gooseneck LED light bar lamps around the house, currently being sold under the brand Hokone . Their identifying characteristic is a distinct "ducktail" shape under where the gooseneck meets the lamp body. They work…

Angled support legs

Designed to support a control panel, raised up and at an angle.

Button Battery LED Holder

A simple little set up to hold a battery and LEDs to make light up necklaces or other crafts involving button batteries. The 3-Volt 2032 button battery securely snaps into place and built in grooves guide the LED leads into place and hold…

LED strip holder for Nut5 ITEM profiles

It has a shadowing feature, which blocks the ligth from your eyes - if you place them as intended, especially on a Core XY printer. Print as much as you need for your application, just simply click it into the Nut5 ITEM profile. Slip the…

Small 3030 Daylight LED Mount (Vector3D) (VCore 4 with enclosure)

This is my LED Daylight Holder to mount it under the extrusion for my RatRig VCore4, but it could also used for other printer like Voron and so on. I used the Vector3D LED Stripe. I made and used it for my V-Core 4 with full closed…

Button 12X12 mm beveled 2-hole

12X12 mm beveled 2-hole button

Faux LED Bar for 3DSets Landy "ARB" Bumper

A faux led bar for the ARB style bumper by @pruzkumakkoubahadr. I suggest using -.025 Horizontal expansion on both parts for a snug fit without sanding. Enjoy and post your makes!

Chrismas tree with LED light

Layer hight for the strings work should be 0.3mm. For others, don't care. Feel free to contact me if you need support on printing this model and modify the model. I use PrusaMK4, 0.6mm nozzle. christmas tree-3-0 v0: no holes for emitting…

Ikea Mittled light bar shade

I created a simple shade for the Ikea Mittled lightbar. It's modular and can be used for all length of the lightbars (40, 60, 80cm). The ripples at the front cover the seams between each part as good as possible. To connect the single…

Squares See Through Bowl - Angled

Squares See-Through Bowl - Angled This 3D printable bowl features a unique geometric pattern of intersecting squares, creating a mesmerizing see-through effect. When viewed from A side angle, the intricate latticework reveals a…

nice!view OLED

I created this since I am building my own custom keyboard based on a combinations of Totem , TBK Mini and juriform36 😎

Christmas Gingerbread House with LED

Gingerbread Houses - Decorative and Cozy Dive into the festive spirit with these charming gingerbread house models. Available in multiple sizes, each with its unique profile: Solid Models : Perfect for decoration, adding a touch of warmth…

Spiral/helix for LED stripes

A few months ago I posted a make on printables. It was a “Butt Lamp” (NSFW, no direct link here). For that lamp I created a spiral core to hold an LED strip on the outside, with enough space on the inside, to put the electronics into it.…

T-Motor F80 LED Light; FPV Racing

FPV Race Motor “T-Motor F80” LED light. Fitted with a cut out for a simple LED control board. The logo is a multicolor print where the first layers are printed with a translucent material. After the function check, the housing is glued…

Creality Ender 3 V3 KE Led Light Bar Brackets NEO VERSION

If like me you buyed an a older version, you may noted that is a little more large than the printer, here is the fix

Ender 3 Angled Filament Spool Holder: A Versatile Upgrade

Slides onto rails: Many 3D printers, including the Ender 3, have horizontal extrusion rails. A sliding spool holder utilizes these rails to move the spool holder along the length of the printer. 1 hole for anchor bolt: This hole is…

Holder for Nanoleaf LED strip controller

I made a holder for the Nanoleaf LED strip controller so I could mount it to my bed. I mounted a Nanoleaf LED strip to my bed's headboard to add some accent lighting. I just used some alien tape and stuck it to the side so I can reach the…

Outdoor lamp mount Ledvance

Mounting needle for Ledvance garden lamps.

Angled coupling for the Sovol SH02 for M6 Bowden fitting

I wanted to use famichu's model but with a Bowden fitting. insa- published their own remix for an M10 fitting , but I don't really like the M10 fittings since it allows the Bowden tube to move through the fitting rather than securely…

Knurled M6 thumb screw

I needed some M6 thumbscrews and didn't like any of the existing designs so I created my own. It covers the top of a hexagonal M6 screw turning it into a thumb screw. Consists of 2 parts - the main body and a cover that is friction-fit at…

Angled Double 68x37mm Solar Cell Mount

This is a mount for two 68mm x 37mm 60mA @ 5v solar cells that presents them at 55 degrees. For my use it is intended to be mounted to the front door of a Meshtastic node enclosure where the panels are in parallel, fed through the…

WLED Case

I made this for WLED and a ESP32 on a breakout board. Not made for a project box. Has a snap tight lid and holes for the lead wires for the LED's and one for the power/data. I printed in PETG with no supports. Install WLED Welcome to WLED…

WLED ESP32 Controller Board Enclosure

Description Simple design of enclosure for WLED ESP32 Enclosure with microphone Used components: ESP-32S Development Board 2.4 GHz Dual Core WLAN WiFi https://amzn.eu/d/9D1nSNl SP32 Breakout Board GPIO 1 into 2 Compatible with 30 Pins…

White LED Plastic Ceiling Light Fixed Clips

Mounting Brackets for Lamp Socket Light Fixture Quick fix for broken ceiling light clips. They worked great. These were to fix the clips on an LED kitchen light. They hold the glob with no issues.

Knurled Disc for Mic Stands

Knurled disc with 3/8-16 unc threat for mic stands

Large LED Letters

designed to print easily and work with most LED strips just glue them inside and attach the 2 back hole clips insert your top letter and your good to go! I added an LED test box as well to better test light saturation so you can decided…

Led pixel clock grid

LED Pixel Clock based on RPI 4 zero and ws2812b matrix HW & OS: https://github.com/Wojtaszek632/pixel-clock To assemble it you need: 1x Back_Plate_ROCKET 1x Back_Plate 2x Internal_Frame 2x Main_Body 2x Diffusion_Plate The front diffuser…

LED tube stand - holder (22mm diameter) for flat surfaces

Its designed for a tube from Aquael that has 22mm diameter. Tolerance is 0,5mm to fit well

Playing card case / Playing card box / Spielkartenbox / Doubledeck card case

Playing Card Case made for double deck. Lid fits quiet well on the base. Inner space is 59x89x18mm. Enough space for various types of playing cards. Files with 19 at the end has inner height 19mm. For printing, I recommend 3 vertical…

LG C2/C3/C4/C5 OLED 42" 50mm & 37mm Risers

Slight remix of @B4rt0's LG C2 42" risers. This model has a 50mm rise to accommodate slightly taller soundbars, and chamfered edges for a different look. Due to the increased 10mm rise, the bottom flares out for extra stability.

Dog poop bag holder with led flashlight - Flexi leash

My sister has a dog, she wanted something for her flexi leash. However, she also wanted a flashlight so that she could see the bays in the dark :) Most of the original model remained intact. I just added a few parts. I tried as much as…

Lego Compatible (28139.dat) Minifig Hair Female Long Wavy with Curled Bangs with Rose and Leaves Pattern

This model is compatible with the lego system.

Beveled Heart - No Supports

A smooth-shaped heart with a flat back that can be scaled to any size. Perfect Valentines decoration. Powered by Image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)

TRON Legacy Style LED Sign

3D Printed RGB LED TRON sign , inspired by TRON Legacy from Disney. Uses 5050 LED light strip about 104" long, powered by 12VDC power supply and controller. LED controller used in this build features multi-color and strobe/fade effects,…

magwled WLED Lamp

Super easy to set up everything is pressure fit Required Materials 1x MagWled Controller https://magwled.com/?srsltid=AfmBOoqkkn42OHM3vVQy_1Wa_CK77OUqh4FkzuS7uOSNptdE9KkXKZdd 1x WS2812B light strip…

Christmas Tree Light Base WLED

Light base that holds a neopixel ring and ESP8266 running WLED. The tree is not included, this is just the base designed to hold a WS2812b light ring, an ESP8266, and a buck converter to adapt the incoming 5V to the appropriate voltages.…

LED Light Strip Wall Mount

Print out a bunch of these quick little wall mounted LED strip holders to string an LED strip around your wall or on your ceiling using command strips. Flex the two arms outwards to insert the LED strip into the holder. Print at 100%…

G1/4 Knurled Hex Bore Barb Fitting

I do NOT recommend using this in a computer or around electronics that have not been waterproofed. I am not responsible for any damage that occurs due to leaks or whatever else. User assumes all risk. Test thoroughly before use. Print hot…

led light system

led light system

Fan and OLED 128x32 Plus GPIO Module for Modular Snap Together Raspberry Pi Case. Remix

This is a direct edit of the “__raspi_module_1_01-SIF_OLED.stl” module from the Modular Snap Together Raspberry Pi Case , and the only things i changed is 1: I made the OLED cutout bigger to allow you to mount it forwards or backwards,…

Audio Reactive LED Track, Diffusers, PCB Case and Mount (WLED)

This was designed for a cubby which is 20" wide and 15" deep. The LED's stick to the “channels” (pointing down at a 45 deg angle) and the channels stick to the intersection of the cubby walls and ceiling. The diffusers slide into the…

Scale platform support for Mettler-Toledo PS30, PS60, PS3L, and PS6L

The Mettler-Toledo postage scales have four "arms" that the weighing platform sits on. Each arm has a plastic/rubber bumper piece, which sometimes can break off or be missing. Instead of finding a replacement, just print one! To use,…

Pooping Dog Toothpaste Dispenser - Scaled to fit Colgate Toothpaste

This is a little dog that you can screw onto your toothpaste. When you squeeze the toothpaste he poops it out his butt. Print it on its side so the threaded portion stays round.

LED holder 45 degree

I used already for this model prints from PLA, PETG, ABS layer 0,2mm (0,3mm can be aswell) Infill 15% + Aluminium profile 12x6mm…

BrewPiLess enclosure for Wemo board w/ LEDs

OpenSCAD enclosure model for BrewPiLess_2.1 boards by Filippo Ceraulo, selected for its slim profile and use of D1mini or Lolin wemos. The model accounts for 3 probe inserts fitting GX12 connectors (use caps or flaps to protect them from…

LED holder 0 degree

I used already for this model prints from PLA, PETG, ABS layer 0,2mm (0,3mm can be aswell) Infill 15% + Aluminium profile 12x6mm…

držák nabiječe ledlenser Tatra Terno

Nutno trochu přibrousit aby drželo pevně

URBI splited for V0 print size with closed led strips wire channels with ecas fitting

remix of the previous version closed off the cable channel more and added an ECAS option + tried making it editable again for the connecting hexagon refer to the original

LED holder 45 degree

fit tight but it is able to get out easily

"Untitled" (1982), Keith Haring ( Valentine's Day card or to frame ) - MMU 4 Color MultiMaterial with 8x1.5 magnet holes

cool haring heart image to use as a coaster or a magnet. 111mmx111mm uses four 8mm x 1.5mm magnets. The filament is Polymaker Panchroma Matte: Army Red, Muted White, Cotton White, Matte Black

"Untitled" (Heart) by Keith Haring, 1987 - 4 Color Print as Tile or Coaster

This is a cool tile inspired by @marina_113052 other haring heart design. I used multilateral painting by layer height for the four color design using my MK4S and MMU3. I printed with 0.4 Nozzle at 0.2 layer height, speed setting using…

Radio Controlled Jonny Quest Prober Vehicle

YouTube demo video: https://youtu.be/58Jl6n0qayw YouTube build video: https://youtu.be/NGpEOg99Y-0 A radio controlled version of the 'Prober' vehicle from the 'Jonny Quest' show. The episode is S1E18 called 'Pirates from Below'. It's a…

Swinging door with Basic Board installed

edited parts: BL - Outside Door Block V4 - tested on my enclosure with mk4s BL - Long Outside Door Block V4 - not tested yet Printed with PETG. 0.4 nozzle, 0.25mm Layer For better seal of the plexiglass to the enclosure, i did put m3…

Mounting adapter for 3/8" microphone stand to 5/8″ led light

This is a simple adapter that helps to mount a led light to a microphone stand.

Angled Multi connect M12 battery holder

Hold 2 M12 batteries at an angle for easier removal on the multiboard system

Initialed Napkin Ring

Simple, yet elegant, napkin rings used for a wedding rehearsal, with large initial letters B and N & J on top. Models are in two different fonts (Meticulous-Regular.ttf and Felipa-Regular.ttf, available on multiple free font download…