Prusa MK4/XL Better LED Status Bar
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.06 – €0.08 net (excluding VAT)
For file: MK4 Better Statusbar_0.4n_0.2mm_PETG_MK4IS_5m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.07 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 4.2 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A small bar to slide in display frame, so you can see the MK4/XL Status LEDs if the display has no surface to reflect on
- Rating
- 4.966 / 5
- Likes
- 204
- Downloads
- 684
- Makes
- 70
- Views
- 3,978
- Reviews
- 59
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
My MK4 is on a sideboard and stands over the edge. As a result, you can not see the great new LED status bar of the MK4. This model solves the problem my MK4 and also fits in any Prusa XL/MK3.5/MK3.9. It is a small light pipe and fits perfectly in the opening at the bottom of the display. No screws or glue are needed.
It almost looks like Prusa shipped it right out of the box. Prusa - why didn't you come up with this idea? ;-)
Print instructions
- Print this model. Align the model as in the file. You need no support!
- I use Prusament PETG Clear
Assembly
- Rotate the printed part once to install. The noses must be at the top. The lower edge can then be pushed through to the PCB and then closes the opening flush. See pictures.
Credits
The idea for this project comes from Big Dutch. Great idea, but i want a design which looks like it come from Prusa directly. My model fits perfectly in the frame and stands out only 1.5 mm. In addition, it comes without hooks.