Cavity Wall Box for Paulmann LED Spotlight Power Supply / Hohlwandgehäuse für Paulmann LED Strahler Netzteil
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.96 – €1.17 net (excluding VAT)
For file: WorkLedLight_housing_powersupply_Lid_0.2mm_PETG_MK3SMMU2S_1h2m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.06 excluding VAT (range midpoint).
- Weight reported by the author
- 15 g
- Print time reported by the author
- 1.03 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Housing for LED power supply and Shelly switch for assembly in a hollow wall. An optional TPU sealing is included.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 12
- Makes
- 0
- Views
- 94
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
Motivation
For the proper installation of the Paulmann LED Set 3x3W (Mirco Line) I needed a housing for the assembly into a hollow wall.
I also wanted to place a Shelly switch into the housing, so some additional space was added for switch and wiring.
The 12V supply cable for the LED spotlights is secured and sealed with a PG screw connection.
Housing parts printed with PETG (Sunlu white)
Sealing part printed with TPU 95A (Sunlu white) → this part is optional