Counting matching models…
The SHTI (Simple Handled Thermal Imager) found on Amazon HERE (not affiliated, I don't make money from this link) comes as a bare circuit board. I made a basic housing to protect it. It includes an optional lens guard that can be glued…
Build a professional protective housing for your Raspberry Pi 5 with Waveshare Connector Adapter. Here we offer you the STL files for 3D-printed housing parts, which have been specifically developed to securely hold the Raspberry Pi 5…
Introduction I'm sure everybody has seen the beautiful 30th anniversary PS5 Pro release . The USB-C cable housing they included for the cable was a very cool design, so I thought maybe us existing PS5 owners can also share some of that…
Build a professional protective housing for your Raspberry Pi 5 with the official Raspberry Pi M.2 HAT+. Here we offer you the STL files for 3D-printed housing parts, which have been specifically developed to securely hold the Raspberry…
Build a professional protective housing for your Raspberry Pi 5 with Pimoroni NVME Duo integration. Here we offer you the STL files for 3D-printed housing parts, which have been specifically developed to securely hold the Raspberry Pi 5…
Build a professional protective housing for your Raspberry Pi 5 with Waveshare PCIe to M.2 Adapter. Here we offer you the STL files for 3D-printed housing parts, which have been specifically developed to securely hold the Raspberry Pi 5…
Build a professional protective housing for your Raspberry Pi 5 with Waveshare PoE HAT integration. Here we offer you the STL files for 3D-printed housing parts, which have been specifically developed to securely hold the Raspberry Pi 5…
I love the split flap clock by AlexY, and the beautiful case for it by Jacob Lightfoot, so I designed this shelf so I could attach it to a pegboard. I printed it in ABS, PLA would probably be fine but the clock has some weight to it so I…
This is a replacement 1.7Ghz LNB housing that will fit older 2.4Ghz Wifi Grid Antennas. I used this to receive GOES-16 weather satellites on L Band (1.7Ghz). The dimensions of the copper wires are approximate but its tuned to 1.7Ghz using…
Housing for the ZERO-DISP-7A touchscreen from Waveshare I tried to make it as compact as possible and to keep it as simple as possible. Total height is about 25mm Recesses for display control buttons on the side. There are 2 slotted holes…
Raspberry Pi 4 housing made for a project, the pi is a tight fit inside the box, holes along side of exterior are for cables and zipties for cables. I believe I used 2mm screws for mounting the pi, 3mm for the lid, and 4mm for mounting…
I bought a stairway lighting controller (RL-Step-02) which came with the LRS-100-24 power supply. The model for the RL-Step-02 controller I've uploaded here:…
The stairway lighting controller RL-Step-02 I found on Amazon to illuminate step by step the stairs. That looks very good - but it is delivered of course with a lot of cables and with a not very nice power supply with additionally…
Prusa Referral Program: Need to upgrade your Printer? Referral Links🔗 for an extra 1kg PETG Urban Grey at checkout with the purchase of a Prusa Core1 / L / XL . Prusa T&Cs . Allsky Meteorite Camera Inspired by the Thomas Jacquin concept.…
Print two the same parts and assembly with the bearing and 4xM4 nuts Material PET-G layer: 0,25mm
Twilight Zone pinball clock housing. The original tends to crack or get yellowish and is very expensive to buy.
Housing made for ESP32. There no mounting holes for the esp32 because the esp32c3 versions from Seeed doesn't have mounting holes zo i fix them in place with a little hot glue. My first remixing a model without any experience.
I created this EtherCon Housing that fits over several generic RJ45 connectors on cat cables. Very handy when the locking pin broke of ect. Can be printed in the orientation shown without any support.
Beschreibung An easy-to-print housing for the Shelly plus 1, Shelly plus 1PM, Shelly Plus Gen 2 and Gen 3 The housing has space for up to 3 WAGO 221 clamps. The cables are neatly and securely fixed with cable ties. The reset button and…
I made a small case for a 5v power supply. Holes for magnets 6x3. Holes for mounting with insert for 3m.
When looking for the Cheap Yellow Display online, look for ESP32-2432S028R. It is a 2.8inch display with resistive touch screen that comes with a ESP32 onboard. With the Arduino IDE it is very easy to use it for own applications. There…
Requirements: You will need two 25mm M4 screws for installation. I bought the Bowden parts on Amazon as a kit: https://www.amazon.com/gp/product/B0CMQN1681/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1 This remix of the Elegoo Neptune 4…
Make sure to take apart your webcam and see if the board matches the one shown in the image. I'm not sure how else to identify the model; if you have any ideas please leave a comment. The case snaps shut, but should still be easy enough…
This is a revision of the camera arm that Boogie had provided to serve as a base for people's own designs. I extended the length of the camera arm and added a bend to create a viewing angle. It should be printed in PETG at 30% infill; if…
This housing is designed to provide environmental shielding while remaining easily accessible. It’s spacious enough to accommodate charging cables with additional protection—like the one I use. It's not intended to be fully weatherproof;…
Overview This is a Gridfinity-compatible housing for Raspberry Pi (Raspberry Pi 3 and 4), designed with flexibility and organization in mind. It's a personal project I made for my setup and decided to share in case it’s helpful for others…
The replica is only visual, made from photographs from the Internet and general dimensions. The housing can be used for your radio projects and/or projects on Arduino (taking into account the modification of the housing model for a…
E N G L I S H A housing for a standard Keystone module ( https://amzn.to/3LMuK5u ) to be able to install a LAN connection is a German sub-distribution, so that you can also still get to the LAN port. Right side is closed, left side is…
Allsky Meteorite Camera Inspired by the Thomas Jacquin concept running on Raspberry Pi. Make use of your ZWO Camera Sensor for full time monitoring of the night sky. Examples of Allsky Images taken through long exposures and to generate…
After a year, I finally sat down and modelled the 3rd (and, hopefully, final) version of my vision of an All-in-one electronics case that doesn't compromise on aesthetics and performance. It mounts a Pi4 on the right and an SKR 3 on the…
Build a professional protective housing for your Raspberry Pi 5 with IQaudio DigiAMP+ integration. Here we offer you the STL files for 3D-printed housing parts, which have been specifically developed to securely hold the Raspberry Pi 5…
Build a professional protective housing for your Raspberry Pi 4 with IQaudio DigiAMP+ integration. Here we offer you the STL files for 3D-printed housing parts, which have been specifically developed to securely hold the Raspberry Pi 4…
Build a professional protective housing for your Raspberry Pi Compute Module 5 IO Board. Here we offer you the STL files for 3D-printed housing parts, which have been specifically developed to securely hold the official Raspberry Pi…
Build a professional protective housing for your Raspberry Pi 5 with Waveshare Connector & USB 3.0 PCB Adapter. Here we offer you the STL files for 3D-printed housing parts, which have been specifically developed to securely hold the…
Build a professional protective housing for your Raspberry Pi 5 with Pineboards HatDrive! PIANO integration. Here we offer you the STL files for 3D-printed housing parts, which have been specifically developed to securely hold the…
Build a professional protective housing for your Raspberry Pi Compute Module 4 IO Board. Here we offer you the STL files for 3D-printed housing parts, which have been specifically developed to securely hold the official Raspberry Pi…
Build a professional protective housing for your Raspberry Pi 5 with Pineberry Pi TM1S Top NVMe HAT. Here we offer you the STL files for 3D-printed housing parts, which have been specifically developed to securely hold the Raspberry Pi 5…
Build a professional protective housing for your Raspberry Pi 3 Model B/B+. Here we offer you the STL files for 3D-printed housing parts, which have been specifically developed to securely hold the Raspberry Pi 3 while protecting it from…
Build a professional protective housing for your Raspberry Pi 5 with Waveshare 3-Channel Relay HAT integration. Here we offer you the STL files for 3D-printed housing parts, which have been specifically developed to securely hold the…
This 3D-printable case provides protection and optimal ventilation for a Raspberry Pi 5 and the Waveshare PoE M.2 HAT+. Looking for more Raspberry Pi housings? Features: Precise fit for a Raspberry Pi 5 and the Waveshare PoE M.2 HAT+.…
Build a professional protective housing for your Raspberry Pi 4 with Waveshare Connector Adapter. Here we offer you the STL files for 3D-printed housing parts, which have been specifically developed to securely hold the Raspberry Pi 4…
Build a professional protective housing for your Raspberry Pi 4 with Waveshare 3-Channel Relay HAT integration. Here we offer you the STL files for 3D-printed housing parts, which have been specifically developed to securely hold the…
Use a piece of filament for the hinge. The device is working ok for smaller files 720p 1080p h264. I would say max 5gb files. Mild overclock is necesary, libreelec and a light theme for kodi like quartz. Disable all animations etc, hw…
FLSun Super Racer - HGX Lite Housing / Mount (no inserts)
Please note that this case does not have a frame around the glass and therefore offers less protection! Alternatively, I recommend version 2 of this case with a frame! Before pushing the display into the housing, please make sure that the…
Before pushing the display into the housing, please make sure that the flat cable is centered over the cut-out. It is best to familiarize yourself with the installation instructions before installation (found in the files). All smthng…
Please note that this case does not have a frame around the glass and therefore offers less protection! Alternatively, I recommend version 2 of this case with a frame! Before pushing the display into the housing, please make sure that the…
Merged Sherpa Micro - ECAS + Switch, with Sherpa Micro R2RC2 housing_core_x1_rev8.stl which accepts the RIDGA v2 gear. Prints flat on buildplate without supports.
I've been carrying my M650 L mouse around in my backpack and didn't want it to get damaged. This housing sits in the backpack (with the mouse oriented on its side) and with the relief on the bottom it's easy to get a finger underneath to…
This model is a housing for the Whelen LIN3 emergency lights and its designed for an F150 and uses double sided tape to stick to the upper portion of the windshield. There is minimal flashback inside the cab and uses a 35 degree angle to…
Enclosure for TM9957-touchpad and its accessories extracted from TB-106U keyboards. The enclosure hold four parts: the touchpad itselt, small two button-pcb, flex cable connecting buttons to touchpad, and a pcb which connects the flex…
Prints in place with only supports for the bolt tabs (at least on my MK4s printer) I have test fit this in my car and it fits great, can't test it with a speaker for a few more weeks/months due to the car being restored Drivers door…
This case fits the Gaggimate pro board. It allows the board to be attached to the rear of the case.
Remove the accent bit on the left side of the printer, reuse the two screws to attach the housing. Oh, put the housing on BEFORE mounting the screen, or you'll be doing it twice :D I was able to fit it on my Zero, barely. Have to print it…
Framework consisting of threaded tubes which shall be used to carry textile as housing for a 3D printer Uses customizable threaded tubes ( https://www.thingiverse.com/thing:1657392 ) designed by Hristo Lankov (itzo). Category: 3D Printer…
4020 fan housing for cooling XGSPON ONU Stick SFP+ (8311 WAS-110) rack mountable for UDM Pro/SE/MAX XGSPON ONU Stick SFP+ Link1 , Link2 Fan model: 4020 Requires support: Tree Slim What you see in the image was printed with Creality…
Reverseengineered from scan. Prototype from 2 pcs joined via M2x20.
A housing for the cheap 1.3'' OLED Display (SH1106) with Encoder EC11 like you find them on Aliexpress: https://s.click.aliexpress.com/e/_c37Z1MCx The housing is designed to take up the least amount of space. It is designed to work with…
Housing used for Arduino Nano Head Tracking Project Followed these instructions https://headtracker.gitbook.io/head-tracker-v2.2/ Video of end product:
REX C100 Temperature Control Housing with SSR I wanted a nice housing for my temperature control that was also electrically insulated. Since the control operates at 220 V or 110 V, I accept no responsibility for the electrical wiring.…
Needed to place attenuator between the Baofeng BF-H6 radio and antenna. Without proper housing it would be easy to break and look bad.
This is my take on a housing for the Shelly PM mini Gen3 (and probably the other members of the “mini” series as well). I know there are other designs available, but I did not find one that fit all of my requirements. This housing…
I tried many keystone mounts but no one fitted my RJ45 keystone I had in my stock. So I designed my own. Features: Closed case Simple, sturdy and small Prints without support Strain relief with a small zip tie for keystones without…
Transform your Minisforum UM790 Pro into a Steam Machine with this drop-in solution. All with Removable Magnetic Faceplate Materials Minisforum UM790 Pro Mini PC 2x USB C M to USB C F Short Ribbon Style cables…
All smthng display housings for GaggiMate: https://www.printables.com/@dubios42/collections/2861668 Support my work: https://ko-fi.com/modsmthng Latest update (12 June 2026): Reduced the screw hole diameters, increased the wall thickness…
Build a professional alternative back panel for Raspberry Pi 5/4 housings with the official 7" Touch Display 2. Here we offer you the STL files for a 3D-printed alternative back panel, which has been specifically developed as an addon to…
Base housing of the smthng display housing 3 (with frame and back clip) for GaggiMate . This version has no brackets and is therefore perfect for remixing or attaching to flat surfaces. To do this, add holes for screws in the slicer, for…
Prusa Referral Program - Time to upgrade your Printer? Use the following @ChrisE referral links to claim your free PETG Spool with the purchase of any Core1+ Gen2 / INDX / L+ / XL+ printer from the Prusa3D Store. Prusa account required.…
This housing is designed for a mechanical music box featuring a plate (disc) drive and a metal platform. The model provides a stable and precisely aligned enclosure that supports the rotating plate, holds the metal base securely, and…
A Housing for the ProTek RC Balance Socket board. Uses previously used hardware (2 screws). Easy assembly, push on top. No additional hardware required, no supports.
I generally don't like it when the sensor is so close to the housing. This simple mod makes loading and unloading the filament much more convenient and reduces bending in the filament path. BOM: 1x M3x50 Take a look at the photo gallery.…
I'm learning FreeCAD, made myself a little sensor housing that looks like I wanted it to, screw mounts, and allows access to the potentiometers Print with supports
Modelled in Fusion 360. I made this lens cap cover for my replacement dive housing. I have a Hero 3 and purchased some underwater filters but later leared that they fit the newer style Hero 4 housing which has a smaller lens opening. None…
A little crude but this is made to hold a 24v controller that can control fans with variable speed in the AD5X. I saw the original design by Joel Whitington, but could not locate his file. I created my own. This was my first design so a…
Table Power Outlet Housing This 3D-printable table power outlet housing is designed specifically for DIY power sockets like the one linked below. It allows you to neatly mount a power outlet on or in a desk or table, with a clean and…
All smthng display housings for GaggiMate: https://www.printables.com/@dubios42/collections/2861668 This is a remix of the version for the LilyGo 1.75 Amoled real pictures. The basic housing fits very well (Var0 and 1). The individual…
Maybe you print it in two parts (lay it half cutted sideward onto the printing-bed) and glue both parts together after printing. I never printed it by myself so far (I only implemented the remix because of a user-suggestion).
This Model provide the ability to mount a 7Inch HDMI touch display from mellow ( https://de.aliexpress.com/item/1005008090227343.html ) to a raspberry running the klipper firmware or octoprint. The pushbuttons are exposed to be able to…
Take your DIY electronics projects to the next level with this functional and protective shell. Specifically designed for the popular XL4015 module with integrated voltmeter , this case transforms a bare circuit board into a finished,…
Корпус створено для плат 62x62мм (на фото) з дешевих ламп з алі діаметром 82мм (на алі може бути вказано розмір 85 мм ). Також з цих ламп використовується розсіювач, кнопка перемикача, магніт та гвинти . Модель створена під акумулятор…
Moved pass through more inline with outlets. Angled 45 to give better flow to my taste. I'm very new to designing stuff so not perfect but works fine for me
This is a modified housing for 0.7x barlow lens. It allows to increase working distance under the microscope from 95mm to 115mm. I used it with Nikon SMZ-1B and Nikon SMZ-2B microscopes, but it should work with other microscopes with a…
I added 1.2mm extra space to the rear housing to accomodate the longer shaft and the filament gear not aligning with the hole. You still might have to grind the shaft at the back to avoid hitting the motor, or may be need to add some…
This is a simple and compact housing designed to hold two standard 16 mm buttons or switches. It is intended for use with an ESP32, Hackerboard etc. The housing mounts directly to the Core One frame using existing holes—no drilling or…
This 3D model is a filter housing designed specifically for the Prusa Core One+ . It is compatible with the Bosch R2598 activated carbon filter, commonly used as a cabin air filter in Ford and Volvo vehicles. Why the Bosch filter? Because…
This is a custom-designed scanning mount for the HC-SR04 Ultrasonic Distance Sensor , specifically engineered for obstacle-avoiding robots and Arduino projects. The design consists of two parts: Servo Base: A cylindrical housing designed…
Thanks to the Way of the Wrench video paving the way for modding a lockdown bar for a Stern-style fire button, I couldn't wait until all my parts arrived (mainly the correct button and LEDs), so I changed the housing to accommodate a…
o4 pro housing to fit larger o3 lens mod from tokyodom's remix of krhoms gluing jig. this is designed and sized for the larger o3 lens housing, please see tokyodom's jig page for reference images.…
Printing without support. If the slicer complains about missing support, you can ignore it. The latch inside the housing has a gap of 0.2 mm. I used neodymium cylindrical magnets with a diameter of 5 mm and a height of 4 mm. The magnets…
PWM controller case. For This PWM controller Case has two arms intended for magnets to attach it to the side of my desk but you could likely just Screw straight through where the magnets would go to mount on non metal surface magnets used…
This is a housing for the W8BH morse tutor. it is designed to fit the esp32 version where the esp32 board is mounted on female headers. When inserting the board, you have to flex the housing away from the switch on the left side of the…
Printed this on a Creality K2 Pro with Creality Hyper PLA in Black, Blue and Orange. I used the default settings for the filament and print settings, just removing the brim option. The model is designed to take a Cerbo GX and a GX…
KDxGP PMPCTRL Check out my socials and other things at https://linktr.ee/KDxGP Like my creations? Consider buying me a coffee ☕ at https://www.buymeacoffee.com/KDxGP. Thank you! Documentation Visit https://www.kdxgp.com/pmpctrl to view…
A simple 3D-printable housing for a USB-B connector. The model consists of two separate halves that are glued together after inserting the connector. The USB connector itself is also fixed in place using adhesive. Designed for easy…
Designed to fit inside a 20 mm hole drilled into a wooden door, with a matching recessed magnet in the door frame. Once installed, the sensor is completely hidden while retaining the reliability, battery life, and Zigbee support of the…
Enclosure for FPV receiver. 20×20 mounting. Protects the receiver from dirt, impacts, and other physical damage.
