Housing for four Sub-D / DE9 terminals for a CAN bus hub
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Have a handy CAN bus hub to connect your devices easily
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 35
- Makes
- 0
- Views
- 286
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Public Domain
Having to work with different CAN dongles and devices with a CAN interface it is quite common, that I needed to connect many of them to the same CAN bus. Many of those have Sub-D as a interface. But often they are not the right sex (you have to connect two male sub-d's) or for listening to two devices talking you want to hook up your own dongle.
For those cases I designed that handy sub-D hub, where you can clamp up to four sub-D terminals into a small case and wire the CAN-H and CAN-L's to a single bus. Sometimes I also like to solder the termination resistor into the box. It is a little fiddly to solder but when done this design makes some lab sessions quite a bit easier for me :)
Hope it may be also useful to you!