Housing for four Sub-D / DE9 terminals for a CAN bus hub
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Have a handy CAN bus hub to connect your devices easily
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 283
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Public Domain
Having to work with different CAN dongles and devices with a CAN interface it is quite common, that I needed to connect many of them to the same CAN bus. Many of those have Sub-D as a interface. But often they are not the right sex (you have to connect two male sub-d's) or for listening to two devices talking you want to hook up your own dongle.
For those cases I designed that handy sub-D hub, where you can clamp up to four sub-D terminals into a small case and wire the CAN-H and CAN-L's to a single bus. Sometimes I also like to solder the termination resistor into the box. It is a little fiddly to solder but when done this design makes some lab sessions quite a bit easier for me :)
Hope it may be also useful to you!