Liczymy pasujące modele…
For the leg mounted stabilizer bowl, use any one inch nylon velcro strap. Here is a link to one below: https://www.amazon.com/dp/B0B567TCHF If you would like me to print one for you, check out these links:…
I always had problems with my Kratky bottles. Either, they were super hard to refill, or the plant just dropped into the vessel. This adapter fixes that! You can just easily fill the nutrient solution into the funnel, and it will flow…
Non-destructive mounting for aftermarket speakers for the Mazda CX-30 and other derivative Mazda speakers of the current generation audio system. Mounting holes designed for the Mark Audio CHN-50P to have enough clearance from the door…
in case you don't have a gear, cut the STL and adapt the tip of your motor.
Filament Spool Holder/Adapter for bigger filament spools. I currently use it in my Ender 3 Max. It uses a 1in wood dowel, and a 5 mm screw. I use it for 1.5 kilogram filament spools.
Breathe a sigh of relief, this will work fine for their garbage FPV cam mount design. Print with 100% infill in TPU.
Like most 2nd gen S10 pickups and blazers, the plastic dash parts have broken into pieces. The recessed mounting holes on the underside of the steering column panel are a common break point. Rather than buy a whole new panel, I made these…
Habe lang daran rum getüfftelt, um meine GCM 12 staubfreier zu bekommen. Persönlich würde ich sagen, dass der Adapter bei 95% liegt, aber das ist meine subjektive Ansicht, aber besser wie die Original :-). Die Gummilippe hab ich mir…
Adapter for 5015 5V fan to round pipe. Sized for 10mm ID PVC piping. Epoxy or glue in place Decrease layer height for better quality. Print nozzle facing down to eliminate support requirements.
Build a professional protective housing for your Raspberry Pi 5 with Waveshare Connector Adapter. Here we offer you the STL files for 3D-printed housing parts, which have been specifically developed to securely hold the Raspberry Pi 5…
This adapter enables you to use your old Prusament spools as a Multispool for filament refills of the “Recycling Fabrik” https://www.recyclingfabrik.com It is a sturdy and long lasting alternative to fully printed spools and the refill is…
This 3D printable model is a reducing adapter designed to seamlessly connect ventilator circuits, such as CPAP hoses, with different diameter requirements. It allows for the adaptation between adult and pediatric hose sizes, featuring a…
This is connected with me being the new owner of a Bambu Labs A1 combo. Specifically, this adapter will shrink the hole in the centre of your Anycubic filament spool so that it works with the Bambu Labs AMS system. Also it has a super…
This is the adapter I designed to attach the Smart Orbiter 3 (Revo Edition) to my Hypercube Evolution. It should fit the standard Hypercube Evolution carriage with 3mm dowel pins. It should work as well for the original Smart Orbiter 3…
As Aqara U200 doesn't have 10mm diameter adapter, and especially for my EVVA 4KS deadbolt with hole for retainer - I had to model it by myself. Made few iterations before to gain perfect for my purposes. * By the way, it should also fit…
This includes 3 adapters to mount a PM disc brake caliper onto your Kickbike frame using the pre-installed IS mounting holes, which are in a non-standard position. All made for the upper wheel mounting position. Included - 160mm, 180mm…
Why Use Rims? Printed rims improve the strength and reliability of cardboard spools. They also prevent the buildup of cardboard dust that can interfere with material handlers. Which Version? These models fit Polymaker 1kg cardboard…
Ich empfehle PETG. PLA sollte aber auch funktionieren. Der Markenname wird nur in beschreibender Funktion verwendet, um die Kompatibilität des Artikels kenntlich zu machen. Das angebotene Produkt ist kein Original des Markeninhabers. Es…
Adapter: Bosch PRO Battery → TS10 Soldering Iron Mount (Press-Fit, No Glue) This adapter allows Bosch PRO batteries to be used with a TS10 soldering iron mount . The design intentionally avoids adhesives and instead relies on a tight…
The “bottom” screws into the funnel and the dosing cap goes in the other side. Print as is, no supports needed. UPDATE 2024-10-07: Increased the thickness of the latch wings so they have a better friction fit. Also slightly enlargened the…
It's basically a 1" pole mount for the popular European model of fence posts. The fit is very tight, you may want to use a hammer. It's intentional to make sure the station is as stable as possible.
Screws together with M3 Screws (brass inserts required). There were other models that did similar things, but they were too flimsy and didn't have a good print orientation.
A friend bought @Sam3DBox's 3-Spoke Steering Wheel and needed to connect it to the Moza Racing Quick Release, so I made this adapter for it. Added a tiny detent bump to make a bit more friction, so the steering wheel has a good hold but…
This is an adapter for the 90 degree modular desk clamp that allows you to attach gridfinity plates (2x1 or 2x2) to the clamp, allowing you to rapidly swap adapters to fit the workflow you are working on. The adapter action is smooth, if…
Water Bottle Car Cup Holder Adapter designed for Camelbak Chute 32 oz. Will fit water bottles up to 9.5 cm in diameter (ideally larger than 8.75 cm). Print with support for overhangs or slice into 2 pieces to attach with screws. Planning…
I switched from a Dyson vacuum to a Miele and wanted to reuse the Dyson Home Kit attachments with the Miele vacuum. It's just a simple cylinder that fits the Miele Hose and the Dyson attachments and has minor tapering in the tube to hold…
An adapter to be used on Ice Barrel 400 , so you can chill the water with the lid closed. Connects to a 3/4" barb connector Print upside down with no support
BEWARE: this is a really bad model! :) I don't use CAD software - i am Mr. Slicer Editor (lol) - download at your own cringe risk! I wanted to have a Magsafe holder for the mould in the Toyota RAV4 front center console. It has like a…
Just a small case for the Case for Hailege USB zu RS485 TTL Serial Converter Adapter FT232RL 75176 https://www.amazon.de/dp/B07Z1V5WQS
Adapter to mount 2 40mm fans to Nvidia L40 GPU. Fans are mounted by M3 bolt directly to the plastic body. Adapter is mounted with original screws.
Adapt your 100mm (4 inch) air duct to a 150mm (6 inch) duct, with option to add an inline 140mm PC fan. To install: Print one of each part Insert M3 threaded inserts into the 4 outer holes on each side of the middle piece Use four anti…
This is an adapter for attaching Festool 36mm hose to a “standard” 2 ½" dust collection port. I designed it for using Festool dust collector with D36 hose with my my table saw, router table, planer, jointer, bandsaw, etc. I was using…
Tesa Power Kit-Adapter BK43-2 is a great product, so you can attach items on the tile, without drilling in it, and can hold up to 5 kg each, and can be easily removed. I've designed a simple cover, so the adapter can be hided, and used…
Print to scale, suggested about 5cm side.
Magnetic hotswapping adapter: This adapter allows for quick swapping of the pens during multicolor prints. It uses 20mm 11mm 2.5mm Neodym magnets. Insert them after the print with double sided tape.
An adapter for Anycubic filament spools, specifically for use with the AMS or ACE systems. This adapter is placed around the outer perimeter of the filament spool. It ensures that the spool fits securely and rotates smoothly, improving…
This is a niche use case, but maybe someone will find it useful like me for combining two excellent tools to easily and accurately cut shapes from 6 and 12mm MDF. Guide is a two part clamped adapter that fits around the DCS571 base to…
A remix of Printojet's amazing design. Strong enough to be used without the front bar support with 2 sets of stiff springs. Bolt fork much stronger to cope with sudden joystick end-of travel bumps. Designed to have no flex with PLA <40%…
This is a print-in-place rectangular slot wheel. There's also a peg with the same slot, to make the other side of the bin the same height without requiring 4 wheels. I am not releasing a version of the wheel that does not say “WHEEEEE” on…
I thought this was applicable for those that already have this engine, and it worked out great!
Remix of Andy Forsberg's fantastic fish feeder for a classroom deployment. Due to the little fingers and general clumsiness inherent to the primary classroom environment, I figured some slight tweaks were necessary my wish list came down…
Nikon bayonet mount to use various projector lenses on nikon camera's. The inside barrel width is 44mm wide and fits the Leica Elmaron 1:2.8/100mm and Leica Hektor -P2 1:2.8/85mm projector lenses PLA printed
Simple Attachment Adapter for the original Bosch Unlimited Wall / Charging Mount.
Adapter for fitting a Phillips HUE button over a LK breaker. Models uploaded for 13x1 mm magnet and 10x2mm magnet.
An Adapter (44.5 mm inside to 35 mm inside) to connect a Ryobi Orbital sander to a Dewalt Shop Vac. Hopefully, it will work with other setups as well. Print in TPU.
The TPLINK TFC311B20 does not have a Wallmount option. So here is one. I heard this TP Link Model is requiered in some areas.
2/15/26 - UPDATE: Added an adapter to go from Creality CR-Touch to BTT MicroProbe, based off of user feedback (untested by myself). This is an adapter to mount a BTT MicroProbe in place of a BLTouch V3.1 (might also work to replace a…
This adaptor replaces the 8*7.5mm PTFE tube clamped into Prusa's Filament Guide Addon for the standard Prusa Spool Holder. It provides a square tapered hole that 4mm PTFE tube can be pressed into for a Reverse Bowden setup. The PTFE tube…
I brought Mobapad joycon which do not include the adapter with it. So I create my own that not too wide when assembly with the Mobapad. Along the designing process I found that the dimension of sliding rail is different than original one…
A baseplate for the OSS-H shifter to fit the EG-STARTS encoders commonly found on Amazon, Aliexpress etc. This encoder has a USB-B connector that needs to be exposed to allow removal of the cable. The baseplate fits both the original and…
Raises modern flip phones up to ensure good contact between charging sensors on the phone and charging stand Tested with Motorola Razr+ 2024 Printed 0.4mm nozzle, 5% in-fill, without supports in PLA
After upgrading my SR-P Lite pedals with a load cell I wasn't happy with how they felt with their smooth plates and shallow angle. I found some decent looking and priced pedals on Amazon and created adapters for mounting them in a more…
🛠 Customizable in Your Browser Adjust size, height, clearance, and more so it prints exactly how you need. Customize it on the Lunar Prototypes website. No slicer hacks or CAD required. Build Your Version Now See below for more details…
Quest 3 Cricket Controller Adapter Update 18-05-2025: quest_3_cricket_controller_adapter_v2 Fixed some imperfections added mount screw mount holes Update 19-05-2025: quest_3_cricket_controller_adapter_v3 Reverse the thumb screw position…
This is an adapter to allow filling sausages using the meat grinding accessory for the Bosh MUM5 kitchen robot. There are two sizes to fit smaller or larger membrane diameter. You need to print the disk which replaces the meatgrinder disk…
For measuring smaller radiants with my calliper I designed this adaptor. Just align both axles to the radiant and measure the distance to the radiant with the thorn. The distance needs to be reduced by 10mm. For use in CAD tools.
Acknowldgement The Einhell part of the adapter is roughly based on the Battery Adapter Einhell Power X-Change General Purpose V2 by Hans . Warning The original battery has exposed contacts which pose the risk of accidetial shorts. The…
Adapter for input shaper probe https://www.printables.com/model/422330-clip-on-rp2040-zero-adxl-345-input-shaper-probe
This holder/adapter is designed to provide a secure and versatile way to mount your DJI Mic 2 to a wide range of action cam accessories, including the DJI selfie stick. The model can be printed as oriented for best stability. Supports…
I wanted to avoid using batteries to power the station, so I needed a place where I could run the cables through (wires in the picture). Drilling through the supplied mounting rod was not feasible and it is not hollow, so I used a 16mm…
This adapter was used and tested on the 40v EZ Clean 600. Since the washer connectors are the same it will also work on the 600 18V +one version and the 320 18V +one version. The jug handle is useful to steady and control the washer.…
Modified the battery adapter from @Simon_220817 to have better contact of plus pole. Moved the battery 1mm to the front.
Informations Designed a Adapter Plate for my Mikrotik wAP AC Access Point to mount on any Camera Equipment. I use it with a Small Rig 10" Arm and a Manfrotto Super Clamp. Work really well and is very stable. You need some small screws to…
AA and C size batteries are the same length, but C is bigger diameter. In those cases you need a C size, this will help. Most rechargeable C batteries have the same capacity as a AA battery, so I use these for devices that need a C size…
Just added a positive bump to lock the socket better, this will hold best when on the rail.
One of the cheapest options for dust collection in home woodworking shops is to use readily available and cheap PVC drain pipe. The problem is that most dust collection fittings are not made for these pipes (though that seems to be…
This piece adapts a harbor freight storehouse bin to a Vevor 14" ball bearing drawer slide to make a Sortimo-esque rack.
Simple part designed to connect 38mm Festool Dust Extractor hose to M18 sander.
This adapter can be used in conjuction with a reverse lens adapter and a bellow or macro tubes to attach a RMS mount microscope lens to a digital camera.
The G30 / GT30 China Carbon Gravel frames have the screws holding the flatmount brakes hidden in a recess and no other means of mounting any kickstand. For this frame you will need 2 M5 x 60 countersunk screws. Feel free to remove the…
Disclosure: Although the license for the 270 hinge adapter is restricted I have received permission from @Diablo_1609422 to remix it, which is located here K1C Adapters for use with V2 and V3 270 degree hinges . The license is why it…
Allows for more clearance at the back of the saw (e.g. for a roller table for out feed)
I basically had nothing but issues printing the original file. I changes some things to make it able to print without any support and made it a tad larger to give a few more walls to the thinnest spots. I printed in PLA+ with a .16 layer…
Most filament spools measure about 60mm in width. The filament holder in the Elegoo Neptune 4 Plus (and other Elegoo Neptunes) is wider. Usually the spool finds its way to the most misaligned position adding friction and wear. This sleeve…
The mount is designed, to use a heated insert like this one https://www.amazon.de/dp/B09MTS6ZZQ The size is 1/4“-20x12.7 but anything shorter should work just fine.
It's hard in the U.S. to find a Singer 201 without a potted motor. This allows a reproduction hand crank to be fitted. The magnets are ¼" cubes. Put a single layer of masking tape between the adapter and the wheel with the adhesive side…
Railing support 25 mm top adapter. Print in ASA for UV resistance. Sand and smoothen the top with acetone, if needed. Use 5+ walls for strength. For a clean top, print as is, with supports. Print outer walls first (or vv) to reduce outer…
Shopvac dust collecter adapter for Black & Decker Dragster Belt Sander
Oxlam handheld vacuum adapter allows for attachment of smaller tools. I can now use the inflation tools to vacuum fuzzy bits out of my sewing machine.
Adapters that slide over the arms of an Apple Vision Pro to enable the attachment of a second Dual Solo strap. The arms have to be detached from the body using the special pin that was shipped with the AVP. I printed the adapters…
This is a cover/adapter for a LED spotlight ( if scaled at 25 cm the spotlight hole is 8 cm)
I wanted to use the HULA feet for the Prusa Enclosure and not just the printer itself. So i used the outline of the original foot for the Prusa Enclosure. From there I designed the foot to connect to the HULA foot and enclosure. Hope…
I hate the idea of having different batteries for different tools or being locked into a tool brand because you've accumulated their batteries. Ryobi have some great 36V gear (40V in the USA) and I wanted to use my existing Ozito/Einhell…
When installed on this adapter, the base will be angled at 7 degrees from the cockpit mounting plate. To lock the base in front, you will need M6x18 screws (I had them with washers), and M6x10 screws for the back (included with the base).…
To have this properly fit a K1 SE, you'll need to print the parts below: Cable Links x24 - https://www.printables.com/model/827586-creality-k1-cable-chain-sagging-fix Front chain support x1 -…
Adapter for mounting thread to your water tank. Hole is 55.5 mm diameter. Thread is G1 1/4 BSPP
Volvo 850 speaker adapter to convert to 13cm (5inch) speaker. If needed drill new holes to position your speaker. Print out of PETG or ASA or ABS or better. Use at least 20% infill and 4 walls.
IMPORTANT : cut the model so its height is about 2/3 the width of the spool: Print recommendations: 0.2 layer height, 0.4 layer width random seam position or scarf seam concentric top infill
There are many 5.25" to 3.5" adapters, but they either didn't fit my desktop slot, didn't fit the 3.5" device I was trying to install, or were designed as though 3D printers create sheet metal parts, utilizing thin walls and unnecessary…
A small print you can use to mount your IKEA KVART Spot to the wall.
Problem my monitors use AC adapters whose cables are too short to reach the floor from the desk, so they hang in the air instead my monitors are Potalion & WasabI Mango branded it so happens that my AC adapters are both the same size…
I use these cheap precision scales to weigh my grounds when making espresso. Since they are too small to fit my portafilter, I designed and printed this adapter for regular 58mm portafilters. You need to remove the original (glued on)…
I was looking for a solution to use the linear rails SBR16 with the quick swap kit and it was also necessary that we can quickly remove the adapters.
Gedruckt mit PLA Für Makita Akku Adapter: Makita Battery Mount by GPlatek on Thingiverse: https://www.thingiverse.com/thing:352094 AkkuTerminal: https://www.ebay.de/itm/386728240720 Module: Voltmeter: https://www.ebay.de/itm/135144196030…
Gedruckt in PLA Für Makita Akku Adapter: Makita Battery Mount by GPlatek on Thingiverse: https://www.thingiverse.com/thing:352094 AkkuTerminal: https://www.ebay.de/itm/386728240720 Module: Voltmeter: https://www.ebay.de/itm/135144196030…
Weil ich einen Lüfterschlauch nicht gerade hoch verlegen konnte, habe ich mir diese Lösung einfallen lassen und sie auch gleich in PETG HF gedruckt. Beim Drucken mit PETG HF empfehle ich, den AUX-Lüfter auf 80% zu stellen, damit der Druck…
