1 / 3
Adapter 30 to 50 mm gym — zdjęcie 1
1 / 3

Adapter 30 to 50 mm gym

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Adapter for standard size weight plates to fit on a 30mm bar.

Ocena
0 / 5
Polubienia
19
Pobrania
88
Wydruki
0
Wyświetlenia
707
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Sports
Licencja
Creative Commons — Attribution

I did not read carefully enough when ordering my legpress attachment. Apparently the wight bar was only 30mm thick, so I could not use my 50mm standard weight plates. Quick model in Fusion360 gave me a solution until next morning instead of ordering from the company for 20 euros. 

I made the tolerances 0.3 mm so middle hole is 30,3mm and outer diameter is 49.7mm. It was a snug fit for me at least. 

I printed in ASA, because I like it, and it was loaded in my printer. I also did 30% infill, since it is bound to take some load in this application. 

PS. Always check your max ratings on weight load on smaller holders when doing this, since those 45cm big plates can be a lot heavier than the small ones! Stay safe!

Tagi