Liczymy pasujące modele…
Print and use at own risk. Referring to this as a "Safe" hook is in no way a guarantee of safety! I wanted to design a hook to use for my kids dress up clothes, jackets, etc. I had purchased small metal hooks and after installing several…
For aligning hexagons with an edge length of 150mm 25.4mm (1in) apart.
Habe lang daran rum getüfftelt, um meine GCM 12 staubfreier zu bekommen. Persönlich würde ich sagen, dass der Adapter bei 95% liegt, aber das ist meine subjektive Ansicht, aber besser wie die Original :-). Die Gummilippe hab ich mir…
Greetings! And yes, I have gone off on a tangent again. This time after picking up a cheap tabletop pool set from the shops on the request of my youngest boy, I thought to myself, "I wonder if I could design a decent printable mini…
Inspired by the LTT magnetic cable management holders I designed these to go with 10 mm diameter x 2.65mm high screw in magnets. These use M3 countersunk screws and 4 mm high heat set inserts. Magnets:…
Adapt your 100mm (4 inch) air duct to a 150mm (6 inch) duct, with option to add an inline 140mm PC fan. To install: Print one of each part Insert M3 threaded inserts into the 4 outer holes on each side of the middle piece Use four anti…
I have remixed the ender 5pro skirts to fit 50mm fans for a cooling solution for the electronics enclosure. Use heat inserts in the centre part of the skirt for the fan.
Deutsch: Ringe um die Pflanzen im Mulch-Beet besser zu schützen. Das Wässern geht somit leichter und das Wasser fliesst weniger davon. Dazu sieht es noch sehr schön aus. Zusätzlich hat es noch an 4 Stellen kleine Löcher um den Ring mit…
Este gabinete de 100x50x50 mm ha sido diseñado específicamente para proyectos electrónicos que requieran una carcasa compacta, funcional y fácil de imprimir. El modelo está optimizado para impresión sin soportes al colocarlo con la base…
Print Details: 3D Printer: Creality K1C Print Material: Hyper PLA Print Settings: Standard 0.4mm nozzle with default settings. Print Support Required: No Print Duration: 46m 52s Dimensions: a. Model Dimensions Height: 87mm Diameter: 50mm…
So this is my holder for abrasive disk i would recomend to print them with 5-10% infill. I have desing it if you could say so to hold 10x 150mm disks at a time.
50mm DN50 D50 pipe cap/stub/stop Заглушка канализационной трубы 50mm
Greatly reduced the amount of holes on the top and bottom, also adjusted the main body to increase overall strength. I also shrank the height of the container to make a 50 mm puck sized container:…
A remix to suit my needs. I wanted these parts to match the shape of the original Voron release parts I had printed.
Slight remix of @B4rt0's LG C2 42" risers. This model has a 50mm rise to accommodate slightly taller soundbars, and chamfered edges for a different look. Due to the increased 10mm rise, the bottom flares out for extra stability.
I am a hobby photographer and developed this filterbox for my ND and GND filters size 100x150mm. It can store up to 13 filters. Also 100x100mm filters can be stored but than you have to use the transition plate. Support is required for…
Voici un modèle de protection pour boule de remorquage 50mm imprimé en TPU avec 3 clips de maintient intégré
I needed a holder to keep my projector slides organized and safe, so I created one on Tinkercad. I printed it in PLA using Inland Wood Rainbow and Inland Light Blue PLA for the label on my Bambulab A1.
MOCK SUPPRESSOR TRINITY 14mm CCW THREAD (most common) 150mm lg 38mm diam. Built in two part with an I.D. of 32mm. This supressor is designed to be use with internal foam to supress the sound of gas airsoft bb gun.
This is a 50mm ball in box model to help you dial in your CNC machine. Box: 50mm with 5mm rails Sphere: 46mm diameter Notes: Use the 50mm - ball-box-12mm-depth-for-makeracam.step file when generating tool paths. It cuts down 12mm, which…
I've printed in both PLA and PETG, and both works fine, though I prefer the variant in PETG.
Adapter 3/8 square to 1/4 hex bit The way to use on: https://nerd-corner.com/3d-printed-bit-adapter-square-hexagon/ or https://nerd-corner.com/de/3d-gedruckter-bit-adapter-vierkant-sechskant/
simple lathe spider that extends further than others I found and meant for a 4 jaw will make more varations in the future and improve one the design.
Arm for headlamp level sensor. fits 10mm ball. length from 60mm - 150mm, measured from senter ball to ball. STEP file included.
I have attached a ring for the optics with rain deflector to the outside ATTENTION: Please print in PETG / ABS or better. Please download the files for the hose adapter from the original creator.…
For aligning hexagons with an edge length of 150mm 25.4mm (1in) apart.
Modeled this adapter with the conspit wheels in mind The hexagon and triangle piece I reccomend manufacturing in Aluminium 6mm plate The cilinder has a diameter of 75mm, length of 28mm, the hole in middle has a diameter of 20mm, and 4…
This is a 3D printable pipe connector designed for pipes with an inner diameter of 150mm. The model is ideal for joining two pipes securely in various applications, such as ventilation systems, ducting, or custom piping projects. The…
Für die Klimaanlage Hantech mit der Modellnummer "A016-09KR2/A habe ich eine Ausgangsplatte erstellt um einen 100mm Schlauch dort an zu schließen. Material: PETG-GF (Kann auch in ASA oder ABS) Infill: 15%
There are two holes inside for possible wall mounting. The dividers should slide in with a slight resistance. This may depend on the printer calibration. If necessary, apply a drop of glue to prevent movement.
I wanted the lens to lay lengthwise so that the model is visible, instead of the end cap.
A simple and snug peg board attachment for Knipex 250mm Plier Wrench. Printed with right side down for optimal layer direction for strength of pegs with supports.
Adapter to mount an 50mm Quickrelease on an Fanatec Wheel The Height of 25mm fits on a Simagic QR50. Other Quickreleases should fit, but cant confirm, i made additional Spacers to change the Distance between QR and Wheel. I added an 6.5mm…
This is a modification of the original Voron trident skirt but modified for voron 2.4 with 40mm extrusion.
A simple 50mm base for miniatures with a few crystals and textured surface. You can scale down to 40mm easily and if you want to use for a topper, just set the base below the surface of your print plate in your slicer to get your desired…
GeoCaching - Gabel 150mm - Angelaufastz für M8 Adaption - 2 Versionen 2 Versionen: 150 - Breite 150mm - Radius - M8 Adaption - Self ( Self-Cutting Screw ) 151 - Breite 150mm - Radius - M8 Adaption - Metric ( M4 - Schrauben ) Montage…
Print and use at own risk. Referring to this as a "Safe" hook is in no way a guarantee of safety! I wanted to design a hook to use for my kids dress up clothes, jackets, etc. I had purchased small metal hooks and after installing several…
This 90° corner clamp is a sturdy L-shaped tool designed for accurate right-angle alignment in woodworking, furniture making, and general workshop applications. The bracket consists of two equal arms forming a 90° angle. Both arms feature…
Voron Trident Bed Model just Scaled down to fit for 250mm (maybe not 10000% perfect but works)
Printed on a Tevo Tarantula 0.4mm Nozzle, 0.2mm Layer height
Simply slide your grid storage system into place for easy access in your workshop.
150mm Electronic Vernier Callipers Storage Case. The fit allows adding a felt layer that finished it off beautifully.
Some people have concerns with overheating these vintage Voodoo 3 3000 video cards with just heatsinks. I was not happy with other existing fan mounts, and I had a 50mm fan on hand, so I designed a fan mount that uses screws to mount to…
This is an addon to the Sovol SV08 Max 150mm ZZ Tophat Replacing a corner with a version that has a Wham Bam the Clound holder. This model do not use or need any inserts, all holes are printed slightly smaller to allow threded screws to…
This is an addon to the Sovol SV08 Max 150mm ZZ Tophat Replacing a corner with a version that so you can place two 120mm fans on the side usefull if you want to move the enclusure fans so the printer can be closer to a back wall. This…
This is an addon to the Sovol SV08 Max 150mm ZZ Tophat The addon is a replacement corner that adds the holder for the BTT 7 Inch ver 1.2 screen. This model uses 8x4mm inserts for the fans all other holes do not and are just printed…
This is an addon to the Sovol SV08 Max 150mm ZZ Tophat This replaces a corner with an air slot and connector to move the air to a IKEA Förnuftig air purifier. You need a separate "IKEA Förnuftig" air purifier that you can get from IKEA, I…
Gridfinity bin for Mitutoyo 100mm (4 Inch) Caliper and two 150mm rulers
BOM: Printed with ROSA3D High Speed PLA Gray Upgrade your larger furniture pieces with these modern, geometric handles. The front face features a textured hexagonal pattern that catches the light and adds a premium touch to any wide…
Printed with : Creality Ender 5 S1 + Sonic Pad, 0.6mm Nozzle, PLA, 0.4mm Layer height, 50% Gyroid infill, 2 walls, Tree support. Slicer print time: 57 minutes. Print time: 39 minutes. ~5M of PLA = ~15gr = ~€0.30 worth of filament.…
this elongates the linear rail in case you have a shorter one to use. it fits the table top cut out as well.
I made this box for organization, because my table is messy 24/7 so I decided to make it but the most important thing is that it's stackable. It can be printed at normal settings in 56 minutes. You can resize it and it will work anyways.
Increased Hook length to 50mm and screw length to 45mm
Size Options Scale down in slicer for smaller options or request custom options. 240mm x144mm x 20mm Proposed Print Layout It seems to print best like this: I printed it flat and it's nice and squire, but some scarring occurred on the…
My Klipper screen was flashing red with a warning on the MCU temp. I have the Noctua fan upgrade yet after 20hrs of printing ABS the MCU ws getting hot. The electronics box was almost too hot to touch. I made these blocks to lift the…
Just a desiccant box I made because I was frustrated with other boxes. I sized it to fit between rollers in a large dry box. The lid doesn't fit quite right until both the box and lid are the same temperature so if you try and put a hot…
PLA, 0.2mm layer height, 3 perimeters, 15% gyroid infill for for pleasant stiffness
Very simple cap to create a replacement cap for UK Clipper cans. The original can was a 300ml can with a 50mm diameter. The retaining lip on the can was just 0.68mm larger than the standard 50mm, so added the extra space. I also found…
I really liked MacialT's barbell collar, but I wanted tpu pads, counter-sunk holes, and hex nuts for added strength and durability. I also wanted a better latch grip for locking/unlocking the collars. I am very happy with this design, and…
DE: Dieser flache Schlüsselanhänger im Blatt‑Motiv ist auf sauberen, problemlosen Druck ausgelegt: flach aufs Druckbett, fertig – ohne Support und ohne zusätzliche Haft‑Hilfen. Mit ca. 50×50 mm und 2,5 mm Dicke ist er kompakt, stabil und…
Works to connect this back flow 2" (50mm) to a 32mm hose found in spa air hose. https://www.tubs.fr/fr/clapet-anti-retour-air-waterway-p-546.html https://spasupport.se/produkt/poolslang-pvc-32mm-05-m Glue between this part and hose, and…
Extended arm, if someone need stand for shorter side of ~13" tablet. Original model → Adjustable Tablet Stand 200x150mm by Tim A. https://www.printables.com/model/256993-adjustable-tablet-stand-200x150mm For printing both sides, just…
cable guide printed in 4parts i glued the legs so i can print them horizontaly 0.20 structural PETG black 25% infill
I loved this design so printed it out but found my LEDS were too bright THIS IS ONLY FOR THE 350MM VERSION
These brackets allow you to run a 2.4 style 250mm heat bed for you standard sized voron legacy (370mm extrusion lengths with corner cubes).
As you can see in the photos, the original part was broken. I couldn’t find a suitable spare part, nor any existing 3D model for printing, so I designed and made this adapter myself. The Nevada vacuum cleaner I made this for is quite old,…
This is a handy guide for fitting ship-lapped style boards to the outside of a shed or a fence. This is for 19 x 150mm boards, the jig gives a 30mm overlap for weathering and fixing. Align the first board at the base of the project, make…
I needed a system that allows me to quickly connect and disconnect the ventilation duct of my air conditioning to take advantage of the same ventilation duct and occasionally connect my Prusa Core One or my Creality K1C (coming soon) to…
Adapter für einen 150mm Klimaanlagenschlauch. Schlauch passt sehr stramm über den Adapter, sodass er von alleine gut hält Adapter for a 150mm air conditioning hose. Hose fits very tightly over the adapter, so it holds well by itself
I needed a system that allows me to quickly connect and disconnect the ventilation duct of my air conditioning to take advantage of the same ventilation duct and occasionally connect my Prusa Core One or my Creality K1C (coming soon) to…
I wanted a slightly larger turntable plate for the Dual-Axis scanner included in my RevoPoint MetroY Pro kit ( https://amzn.to/4qK292l ). The turntable is the one in this listing -> https://amzn.to/4tOGvfM - out of the box, it features a…
I purchased the original cover for the MMU3 from Prusa to install on the Core One. However, in my opinion, this configuration negates the advantage of a closed build chamber, as the PTFE tube to the extruder creates a large opening.…
Absaugung für Fräsanschlag 50mm mit optionalen OSVAC M 32 Flansch, welchen es unter folgenden Link gibt. Würde eine 1-2mm EPDM Dichtung verwenden.
I know that there are a lot of wiper / purge buckets out there for Vorons but I struggled to find anything that would work with my combination of 4WD Monolith belts that run across the front on the XY beam and a Beacon Probe that…
System for storing 150mm sandpaper disc's in a SYS3 237. The bottom is the bott/tanos/sys3 org bottom. Printed in 4 parts with connectors. The boxes are 2x7, 3x7, 4x7 and 5x7 in size. The bottom grid needs support under the cross in the…
This is a simple mount to attach a Reolink RLC-810A to a 38mm or 50mm mount originally intended for a satellite dish. It requires the following hardware to assemble: 7x M4 heat set inserts (Ruthex or CNC kitchen) 4x M4x20 screws 3x M4x12…
Summary Rotating Filament Swatch Display for customizable 45mm & 50mm filament swatches . Print Top part Layer Height: 0.20mm Bottom part Layer Height: adaptive or 0.10mm (for smooth ramp) Top & Bottom Surface: Concentric Infill: 10%…
Adapter to fit a "freedom" model hoover, so it can be attached to a 50mm hose to for jobs like sawdust collection. Seems to work well in testing. The hose end has ridges to help attachment. For me it's a push fit, but if it's loose you…
An adapter to allow a 50mm hose to be connected to the Bosch Universal Circ 18v-53 Saw. The saw end has a taper for a good push fit into the saw. The hose end has ridges to keep the hose connected. Is a decent push fit for the hose I use,…
5/8" pin for straps 1/2" for positioning
Can't afford a macro lens? desperate enough to slap a magnifier on it? me too. use this to make your shots look decent.
Gridfinity Mitutoyo 150mm Vernier Caliper + OLFA SVR-2. Split into two parts for printing on small printers
Using Peter H 's great Camlock design as a basis, I modeled an adapter that nicely fits the DeWalt DW733 dust exhaust port. The adapter is asymmetrical, for optimal flow of the dust / wood chips Wall thicknesses are optimized for a 0,4mm…
This is an addon to the Sovol SV08 Max 150mm ZZ Tophat Replacing the back right corner with a version without any hole. Made after a sugestion from Doug Walker A great care was made to be able to print without much support, so hopefully…
Designed for a mate that had a 250mm diameter hole in ceiling and 150mm duct extractor. Requires a 300mm square print bed. I printed in PETG.
